Abstract:The study focuses on the synthesis of nanocomposites CoFe2O4–La1−xSrxCoO3 (x = 0.2, 0.6, 0.8) using a hybrid chemical coprecipitation and sol–gel method. Validation of composite formation, incorporating distinct spinel and perovskite phases, is achieved through Fourier‐transform infrared spectroscopy. From X‐ray diffraction spectra, it can be concluded that average crystalline size calculated from Debye–Scherer and Williamson–Hall method increases on increasing the Sr substitution. Furthermore, the % crystallinity increases on increasing the Sr substitution. The scanning electron microscope analysis confirms the intricate 3D morphology observed in the composites. The electrocatalytic performance of these materials in oxygen evolution reaction (OER) and methanol oxidation reaction (MOR) is evaluated. Notably, CoFe2O4–La0.2Sr0.8 CoO3 exhibits remarkable electrocatalytic activity, achieving current densities of j = 11.1 mA cm−2 for OER and 47.4 mA cm−2 for MOR at E = 650 mV. This underscores its potential as a catalyst for sustainable energy conversion processes. Overall, these findings highlight the promising application of spinel‐boosted perovskite composites in enhancing the efficiency of critical electrochemical reactions. CoFe2O4–La1−xSrxCoO3 (x = 0.2, 0.6, 0.8) composites have been synthesized using a two‐step, low‐temperature wet chemical approach that combines coprecipitation and sol–gel techniques. The composite materials have been physicochemically analyzed using Fourier‐transform infrared spectroscopy, X‐ray diffraction, and scanning electron microscope. The electrocatalytic properties of the composite materials have been assessed in terms of their performance in oxygen evolution reaction (OER) and methanol oxidation reaction (MOR) in alkaline medium. Cyclic voltammetry has been used for analyzing the redox behavior of the materials in 1 M KOH solution. The electrocatalytic activity of the materials has been assessed using anodic polarization curves on Ni substrate and the CoFe2O4–La0.2Sr0.8CoO3 film electrode demonstrates excellent activity, with current densities of 11.1 mA cm−2 for OER and 47.4 mA cm−2 for MOR at 650 mV. Also, the CoFe2O4–La0.2Sr0.8CoO3 film electrode has the maximum specific activity of 1.1 × 103 mA cm−2 g−1 at 650 mV toward OER. The electrodes' stability has been assessed through chronoamperometric experiments and additional insight into the enhancement of electrocatalytic activity gained through the electrochemical surface area estimations using electrochemical impedance spectroscopy. From chronoamperometric experiment, it has been observed that the CoFe2O4–La0.2Sr0.8CoO3 film electrode attains stability within 114 s with a current density of 108.7 mA cm−2. Furthermore, the thermodynamic parameters, including the standard enthalpy of activation (ΔH°#), standard entropy of activation (ΔS°#), and standard electrochemical energy of activation (ΔHel°# ), have been estimated by anodic polarization curve recorded in KOH as well as KOH with CH3OH solutions at various temperatures.

PHYSICALCHEMICAL AND ELECTROCHEMICAL PROPERTIES OF La_(1-x)Sr_xCoO_3 PEROVSKITE OXIDE ELECTRODES FOR OXYGEN EVOLUTION

Preparation of La_(1-x)Sr_xCoO_(3-δ) Conductive Ceramics by Sol-gel Method

Systematic Study of Oxygen Evolution Activity and Stability on La1–xSrxFeO3−δ Perovskite Electrocatalysts in Alkaline Media

Correlating the electronic structure of perovskite La1−Sr CoO3 with activity for the oxygen evolution reaction: The critical role of Co 3d hole state

Structure and Transport Properties of La 1-x Sr x CoO 3 （0≤x≤0.5） System

Optimizing the Electronic Structures of Ca Sr1-Co0.7Fe0.3O3-δ Anodes for High-Temperature Oxygen Evolution Reaction

Optimizing the electronic structures of CaXSr1-XCo0.7Fe0.3O3-8 anodes for high-temperature oxygen evolution reaction

Sr‐doped Double Perovskite La2CoMnO6 to Promote the Oxygen Evolution Reaction Activity

Electrode redox properties of Ba 1−x La x FeO 3−δ as cobalt free cathode materials for intermediate-temperature SOFCs

Boosting the Electrocatalytic Oxygen Evolution of Perovskite LaCo1- x Fex O3 by the Construction of Yolk-Shell Nanostructures and Electronic Modulation

Tailoring Spinel with Perovskite: Sr Substitution in the Perovskite Phase of CoFe2O4–LaCoO3 Nanocomposite for Oxygen Evolution and Methanol Oxidation in Alkaline Medium

Enhancement of the electrochemical properties for La0.6Sr0.4Co0.2Fe0.8O3−δ oxygen electrode by the addition of CaxCo4O9+δ nano-catalysts

Oxygen reduction reaction activity of La-based perovskite oxides in alkaline medium : a thin-film rotating ring-disk electrode study

Extrinsic Fe3+ Stabilized La1-XSrxCoO3-δ Thin Film Cathode for Enhanced Electrochemical Performance

A facile mixed complex synthesis method for perovskite oxides toward electrocatalytic oxygen reduction

La-based perovskites for capacity enhancement of Li-O2 batteries

Improving the Electrocatalytic Activity and Durability of the La0.6Sr0.4Co0.2Fe0.8O3-delta Cathode by Surface Modification

Characterization And Properties Of La1-Xsrxfeo3-Delta With Perovskite-Type Structure

Thermoelectric properties of perovskite-type oxide La1-xSr xCoO3 (x = 0, 0.1) prepared by solid state reactions

Molten Salt Synthesized Submicron Perovskite La1–xSrxCoO3 Particles as Efficient Electrocatalyst for Water Electrolysis

Surface-Electronic-Structure Reconstruction of Perovskite via Double-Cation Gradient Etching for Superior Water Oxidation