Abstract:The hot deformation characteristic of TC21 titanium alloy with lamellar microstructure was investigated with the help of isothermal compression tests in the temperature and strain rate ranges of 760–920 ℃ and 0.001–10 s−1. The principal feature of true stress-true strain curves is flow softening. The flow softening extent increases with decreasing strain rate, but has no obvious relationship with temperature. Based on processing map and microstructure observation, the regime of flow instability was determined to be about 760–855 ℃, 0.01–10 s−1 with flow instability phenomena including macrocrack and adiabatic shear band. The preferable parameters for forging were in the temperature and strain rate ranges of (760–850 ℃, 0.001–0.005 s−1) and (850–920 ℃, 0.001–0.01 s−1), where the microstructure with higher globularization fraction can be achieved. In terms of Arrhenius kinetic rate equation, the activation energies were determined to be 400.635 and 734.430 kJ·mol−1 in the strain rate ranges of 0.001–0.01 s−1 and 0.1–10 s−1, respectively. TEM analysis showed that different activation energies correspond to different deformation modes, resulting in different globularization mechanisms. In the strain rate range of 0.001–0.01 s−1, the deformation is characterized by dislocation motion. The globularization mechanism involves the formation of groove, localized shear and subgrain in α lamellae, followed by β phase penetrating α lamellae along groove, shear interface and subgrain boundary. In the strain rate range of 0.1–10 s−1, the deformation is characterized by twinning besides dislocation motion. The globularization mechanism involves the formation of the twins of α phase and β phase penetrating α lamellae along the twinned region.

Quantitative Metallography Analysis of Microstructure of BT25 Titanium Alloy Deformed in Two-Phase Field

Hot Deformation Behavior of a Novel Near-β Titanium Alloy Ti-5.5Mo-6V-7Cr-4Al-2Sn-1Fe in (α+β) Phase Region

Constitutive Model and Microstructure Evolution of a Novel TG6 High-Temperature Titanium Alloy during Hot Deformation

Quantitative analysis on microstructure characteristic of pre-strained β-solidified TiAl alloy during post-heat treatment

Microstructural evolution and FCC twinning behavior during hot deformation of high temperature titanium alloy Ti65

Constitutive Model and Microstructure Evolution of Ti65 Titanium Alloy

Study on the Relationship Between Microstructure and Mechanical Property in a Metastable Β Titanium Alloy

Hot deformation characteristic of TC21 titanium alloy with lamellar microstructure

Research on the Effect of Quasi-β Forging Deformation on the Structure and Properties of TC21 Titanium Alloy

Evolution mechanism of lamellar α and interlayered β during hot compression of TC21 titanium alloy with a widmanstätten structure

The relationship between flow behavior and initial microstructure of Ti-10V-2Fe-3Al alloy during subtransus deformation

Deformation and Phase Transformation of Disordered α Phase in the (α + γ) Two-Phase Region of a High-Nb TiAl Alloy

Effect of deformation and cooling on non-equilibrium microstructure evolution and phase-transition mechanism of Ti–6Al-2.5Mo-1.5Cr-0.5Fe-0.3Si

Study on High-Temperature Flow Behavior and Substructure and Texture Evolution of TA15 Titanium Alloy

The High-Temperature Deformation Behavior of As-Cast Ti90 Titanium Alloy

High-temperature tensile deformation behavior and microstructure evolution of Ti55 titanium alloy

STUDY INTO STRUCTURAL EVOLUTION OF TWO-PHASE TITANIUM ALLOY DURING THERMAL DEFORMATION PROCESSING

Formation mechanism of lamellar bimodal microstructure and mechanical property in the high temperature near α titanium alloy

Morphology and Quantitative Analysis of O Phase During Heat Treatment of Hot-Deformed Ti 2 AlNb-based Alloy

Microstructure Evolution of a Ti–Al–Sn–Zr Based Alloy During the Hot Compression Deformation

The Effect of the Forging Process on the Microstructure and Mechanical Properties of a New Low-Cost Ti-5Al-1.5Mo-1.8Fe Alloy