Abstract:Due to increasingly stringent fuel consumption and emission regulation, improving thermal efficiency and reducing particulate matter emissions are two main issues for next generation gasoline engine. Lean burn mode could greatly reduce pumping loss and decrease the fuel consumption of gasoline engines, although the burning rate is decreased by higher diluted intake air. In this study, dual injection stratified combustion mode is used to accelerate the burning rate of lean burn by increasing the fuel concentration near the spark plug. The effects of engine control parameters such as the excess air coefficient (Lambda), direct injection (DI) ratio, spark interval with DI, and DI timing on combustion, fuel consumption, gaseous emissions, and particulate emissions of a dual injection gasoline engine are studied. It is shown that the lean burn limit can be extended to Lambda = 1.8 with a low compression ratio of 10, while the fuel consumption can be obviously improved at Lambda = 1.4. There exists a spark window for dual injection stratified lean burn mode, in which the spark timing has a weak effect on combustion. With optimization of the control parameters, the brake specific fuel consumption (BSFC) decreases 9.05% more than that of original stoichiometric combustion with DI as 2 bar brake mean effective pressure (BMEP) at a 2000 r/min engine speed. The NOx emissions before three-way catalyst (TWC) are 71.31% lower than that of the original engine while the particle number (PN) is 81.45% lower than the original engine. The dual injection stratified lean burn has a wide range of applications which can effectively reduce fuel consumption and particulate emissions. The BSFC reduction rate is higher than 5% and the PN reduction rate is more than 50% with the speed lower than 2400 r/min and the load lower than 5 bar.

Optimization and Lean Burn of LPG for Small SI Engine

Two-Stage Lean-Burn Combustion Inside a Natural-Gas Spark-Ignition Engine with a Bowl-in-Piston Chamber

Experimental Study of Impact Factors on Lean Burn Technology for Electron-Controlled LPG Engine

Experimental Study on Lean-burn Electronically Controlled LPG Engine

Optimization of the combustion chamber of SI LPG Engine

Experimental Investigation about the Effect of Double-Spark Plug Ignition on Combustion Characteristics for Motorcycle Gasoline Engines with a Mild Lean Mixture

Experimental Study of Stratified Lean Burn Characteristics on a Dual Injection Gasoline Engine

Optical Investigation of Lean Combustion Characteristics of Non-Uniform Distributed Orifice Passive Pre-Chamber on a High Compression Ratio GDI Engine

Experimental Study on the Lean-Burn of the 2-Valve TJ376QE Engine

Experimental Study on Lean Mixture Combustion in a Four-Valves Gasoline Engine

Experimental Investigation of the Performance and Emissions of a Dual-Injection SI Engine with Natural Gas Direct Injection Plus Gasoline Port Injection under Lean-Burn Conditions

Experimental study on a LPG engine equipped with electronic control device

Research and Experiments about Using LPG as Substitute Fuel on Mini Gasoline Engine

The Lean-Burn Limit Extending Experiment on Gasoline Engine with Dual Injection Strategy and High Power Ignition System

Study on LPG Engine of Motorcycle

Quantitative Analysis on the Effects of Compression Ratio and Operating Parameters on the Thermodynamic Performance of Spark Ignition Liquefied Methane Gas Engine at Lean Burn Mode

Realization of Lean Burn and Emission Characteristic Analysis of Vehicle Gasoline Engine

Influence of Ignition Advance Angle on LPG Engine

Effect of Ignition Advance Angle on Liquid Phase LPG Injection Engine Performance

Optimizing Charge Stratification in a Lean-Burn Spark Ignition Engine

Experimental Studies on the Combustion Characteristics and Performance of a Naturally Aspirated, Direct Injection Engine Fuelled with a Liquid Petroleum Gas/diesel Blend