Abstract:Three types of new-structured phosphorized tin microspheres (Sn–P), phosphorized tin microsphere-carbon (Sn–P–C), and phosphorized tin nanoparticles embedded in interconnected porous carbon microspheres (Sn–P@PCMs) were prepared through a carbothermal reduction-assisted phosphorization strategy. The characterization of the formation mechanism and microstructure of Sn–P, Sn–P–C, and Sn–P@PCMs composites demonstrated that the controllable evaporation of coordinated phosphorus in the thermally unstable tin phosphide intermediate by accurate thermal treatment contributed to the formation of a ca. 3 wt % P-doped metallic tin structure featuring a nonstoichiometric Sn x P y (y/x = 0.2) core, a Sn-rich phosphorized metallic (y/x = 0.05) shell, and an increased phosphorus concentration from the outer surface to the inner core. The as-prepared phosphorized tin-based composites were applied as counter electrode materials for dye-sensitized solar cells (DSSCs), in which the Sn–P–C counter electrode exhibited the lowest charge transfer resistance of 3.47 Ω and the assembled DSSCs delivered an optimum power conversion efficiency of 8.59%, superior to those of Pt-based cells (6.78 Ω and 7.46%, respectively). The unique bifunctional structure of the Sn x P y conductive core coupled with the phosphorized metallic Snδ+ (0 < σ < 0.6) electrocatalytic shell accounts for its excellent electrocatalytic activity and electrical conductivity. In addition, the phosphorized tin-based composites were utilized as potential anodic material for lithium-ion batteries, in which the Sn–P@PCMs electrode showed a specific capacity of 743 mAh g–1 at 0.1C after 400 cycles and 435 mAh g–1 at 5C after 30 cycles. The superior Li-ion storage, cyclability, and rate performance of Sn–P@PCMs could be attributed to the incorporation of Sn–P nanoparticles into interconnected porous carbon microspheres that effectively buffered the large volumetric change and enhanced the electronic–ionic conductivity during the lithiation and delithiation process.

Synthesis and Electrochemical Performance of Tin Oxide Based Composite

Phase-tailored synthesis of tin oxide-graphene nanocomposites for anodes and their enhanced lithium-ion battery performance

One-Pot Synthesis of High-Performance Tin Chalcogenides/C Anodes for Li-Ion Batteries

Tin‐Based Composite Oxide Thin‐Film Electrodes Prepared by Pulsed Laser Deposition

Nano-Tin Alloys Dispersed in Oxides for Lithium Storage Materials

Synthesis of Uniform Polycrystalline Tin Dioxide Nanofibers and Electrochemical Application in Lithium-Ion Batteries

Facile Synthesis of a Tin Oxide-Carbon Composite Lithium-Ion Battery Anode with High Capacity Retention

Electrochemical performance of tin-based nano-composite electrodes using a vinylene carbonate-containing electrolyte for Li-ion cells

Facile Synthesis of Ultrasmall Tin Oxide Nanoparticles Embedded in Carbon As High-Performance Anode for Lithium-Ion Batteries

A High-Performance Tin Dioxide@carbon Anode with a Super High Initial Coulombic Efficiency Via a Primary Cell Prelithiation Process

Electrochemical Performance Studies of Tin Oxide Prepared by Sol-Gel

SnO X /graphene Anode Material with Multiple Oxidation States for High-Performance Li-ion Batteries.

Carbon Coated Porous Tin Peroxide/Carbon Composite Electrode for Lithium-Ion Batteries with Excellent Electrochemical Properties

Controlled Synthesis of Highly Active Nonstoichiometric Tin Phosphide/Carbon Composites for Electrocatalysis and Electrochemical Energy Storage Applications

Advanced Sn/C composite anodes for lithium ion batteries

Preparation and electrochemical lithiation of tin-based materials

(Digital Presentation) Straightforward Combustion Synthesis of Tin/Carbon Composite As Anode for Lithium-Ion Battery with Long Cycle Life

An Elaborate Strategy for Fabricating One-Dimensional Quasi-Hollow Nanostructure of Tin Dioxide@carbon Composite with Improved Lithium Storage Performance

The Optimized Tin Dioxide-Carbon Nanocomposites As High-performance Anode for Lithium Ion Battery with a Long Cycle Life

Tin-based oxide microsphere reinforced by Al2O3 and CNT with superior lithium storage performance

Preparation of High Performance Tin Oxide Anode with Cobalt-Rich Porous Carbon