Abstract:Lithium (Li) metal batteries are strongly considered one of the most promising candidates for next-generation rechargeable batteries due to their high theoretical specific capacity and low reduction potential. However, Li metal anodes are suffering from limited cycle life, low cycling efficiency, and severe safety concerns resulting from sharp Li dendrites and electrolyte degradation. The uncontrollable Li dendrite growth caused by the uneven distribution of Li ions is an extremely complicated issue coupled with the transport of anions, cations and electrons, as well as the chemical and electrochemical reactions at the anode-electrolyte interphase. In terms of the ion migration, space-charge theory indicates that the electrolyte is divided into a quasi-neutral region and a space-charge region. The quasi-neutral region approaches the cathode side, at which the ion transfer is governed by diffusion. In contrast, when ions travel close to the anode side, the ion transport is mainly driven by the electric field, leaving a space-charge region that accounts for ramified Li metal growth. Consequently, it is rewarding to design electrolytes that can regulate the ion distribution (including both Li cations and the counter anions) to inhibit Li dendrite growths. Immobilizing anion has been theoretically proved to influence cation distribution, where a portion of immobilized anions (even as small as 10%) contribute to stable Li electrodeposition. Here, we develop an anion-immobilized solid-state composite electrolyte for Li metal anodes. Garnet-type Li6.75La3Zr1.75Ta0.25O12 (LLZTO) ceramic particles are well dispersed in a polymer matrix to synthesize a polyethylene oxide (PEO)–lithium bis(trifluoromethylsulphonyl)imide (LiTFSI)–LLZTO (PLL) solid electrolyte. In contrast to routine electrolytes with mobile anions, the PLL solid electrolyte contributes to effective immobilization of anions for uniform ion distribution and dendrite-free Li deposition. Chemical and mechanical interactions between ceramic particles and the polymer matrix result in reduced PEO crystallinity and pinned TFSI−anions, enabling relatively fast Li+conduction. We further demonstrate the application of this flexible membrane in all–solid-state LiFePO4 (LFP) || Li and LiNi0.5Co0.2Mn0.3O2(NCM) || Li batteries. Moreover, ion migration in batteries can be analogized to the fluid transportation in packed towers in the field of chemical industry. Redistributors are used to intensify the heat and mass transfer processes in a packed tower. Solid-state electrolyte LLZTO, with abundant 3D ion conduction channels, can act as a redistributor to regulate Li-ion distribution. We propose a concept of ion redistributors to eliminate dendrites by redistributing Li ions with LLZTO coated polypropylene (PP) separators in Li metal batteries. The standard deviation of ion concentration beneath the LLZTO composite separator is 13 times less than that beneath the routine PP separator. This approach enables a high specific capacityfor LiFePO4|| Li pouch cells and prolonged cycle life span of 800 hours for Li || Li pouch cells. This strategy is facile and efficient in regulating Li-ion deposition by separator modifications and is a universal method to protect alkali metal anodes in rechargeable batteries. References [1] C. Z. Zhao, X. Q. Zhang, X. B Cheng et al. Proc. Natl. Acad. Sci. U.S.A. 2017, 114, 11069. [2] C. Z. Zhao, P. Y. Chen, R. Zhang et al. Sci. Adv. 2018, 4, eaat3446. [3] C. Z. Zhao, B. C. Zhao, C. Yan et al. Energy Storage Mater. 2019, DOI: 10.1016/j.ensm.2019.07.026. [4] C. Z. Zhao and Q. Zhang. Joule 2019, 3, 1. [5] C. Z. Zhao, H. Duan, J. Q. Huang et al. Sci. China Chem. 2019, 62, 1286. [6] C. Z. Zhao, X. B. Cheng, R. Zhang et al. Energy Storage Mater. 2016, 3, 77.

Regulating Lithium-Ion Transport Route Via Adjusting Lithium-Ion Affinity in Solid Polymer Electrolyte

Eliminating Li Dendrites in PEO-Based Polymer Solid Electrolytes by Doping with SbF<sub>3</sub>

Solid Polymer Electrolytes Regulated by Ion-Dipole Interactions for High Voltage Lithium Batteries

Unveiling the Effect Law of Carbon Dots with Polyfunctional Groups on Interface Structure and Ion Migration in Polymer Electrolytes for Solid Lithium Battery

Enhanced Interphase Ion Transport via Charge‐Rich Space Charge Layers for Ultra‐Stable Solid‐State Lithium Metal Batteries

Poly (ethylene oxide) based solid polymer electrolyte improved by multifunctional additives of poly (acrylamide) and LiI

Boosting the Ion Mobility in Solid Polymer Electrolytes Using Hollow Polymer Nanospheres as an Additive

Semi Closed Coordination Structure Polymer Electrolyte Combined in Situ Interface Engineering for Lithium Batteries

Ion transport and structural design of lithium-ion conductive solid polymer electrolytes: a perspective

Fast lithium ion transport in solid polymer electrolytes from polysulfide-bridged copolymers

Interfacial and Ionic Modulation of Poly (Ethylene Oxide) Electrolyte Via Localized Iodization to Enable Dendrite‐Free Lithium Metal Batteries

Anion Modulation: Enabling Highly Conductive Stable Polymer Electrolytes for Solid‐State Li‐Metal Batteries

A fiber-reinforced solid polymer electrolyte by in situ polymerization for stable lithium metal batteries

Building Up Ion-Conduction Pathways in Solid Polymer Electrolytes Through Surface and Pore Functionalization of PVDF Porous Membranes with Ionic Conductors

Regulating the Solvation Structure in Polymer Electrolytes for High‐Voltage Lithium Metal Batteries

Revealing the Influence of Electron Migration Inside Polymer Electrolyte on Li+ Transport and Interphase Reconfiguration for Li Metal Batteries

In-Situ Plasticized LLZTO-PVDF Composite Electrolytes for High-Performance Solid-State Lithium Metal Batteries

Boosting lithium-ion transport capability of LAGP/PPO composite solid electrolyte via component regulation from ‘Ceramics-in-Polymer’ to ‘Polymer-in-Ceramics'

Practical challenges and future perspectives of solid polymer electrolytes: microscopic structure and interface design

Regulating Li-Ion Migration in Solid-State Electrolytes for Li Metal Anodes

Nanoporous Adsorption Effect on Alteration of the Li + Diffusion Pathway by a Highly Ordered Porous Electrolyte Additive for High-Rate All-Solid-State Lithium Metal Batteries.