Abstract:In recent years, with the prohibition of CFC by international community, the cascade refrigeration cycle is showing the development of new features, in which Auto-cascade refrigeration cycle with its simple structure, reliable performance particularly has aroused widespread concern. This paper puts forward using the distillation column instead of the multi-stage segregation device, which make full use of the distillation column to provide good enough conditions for the vapour-liquid contact,creat a greater contact surface, ensure the space and time of heat and mass transfer between each component of refrigerant and lubricant, in order to achieve high efficient separation.This cycle uses environment-friendly non-azeotropic mixed (NARM) R600a\R23\R50 as refrigerant. The improved PT equation is used, according to the quality and energy conservation of the distillation column and heat exchanger to carry on thermodynamic analysis. On this basis, the selection and the calculation of the experimental apparatus and equipment carried out to self-made a auto-cascade refrigeration cycle prototype. Through the cooling test of the eight different mixture ratio, the best quality ratio is found and the minimum temperature the ratio can reach. Through repeated experiments, study that the cycle compression ratio of one component affect on the temperature inside the ultra-low temperature box, the cycle compression ratio of the different components under the same temperature inside the ultra-low temperature box affect on the system performance, and the three throttle, cold boxes cycle high and low pressure ratio and distillation column reflux liquid extraction rate affect on the system performance. The prototype broke the traditional method that access to the depth refrigeration needs multiple refrigeration compressors, only use a single-stage air-conditioning refrigeration compressor with lubrication, to achieve high and low boiling point component through the use of distillation devices, including high-performance lubricant separation, successfully reduced to below -80 degrees C, and system stability. According to the results of a series of experiments, analyzed the ratio of working fluid, cycle pressure ratio, distillation column extraction rate of liquid return, increase heat and the expenditure component's effect on the temperature in the ultra-low temperature box and the COP of system.

Energy-saving Control Method for NH3-CO2 Cascade Refrigeration System by Directly Regulating Slide Valve Position in Twin-Screw Compressor

Performance Evaluation and Optimization of the Cascade Refrigeration System Based on the Digital Twin Model

Utilization of Ultra-Low Temperature Heat by a Novel Cascade Refrigeration System with Environmentally-Friendly Refrigerants

Numerical investigations on the performance of a single-stage auto-cascade refrigerator operating with two vapor-liquid separators and environmentally benign binary refrigerants

Integrated product selection and process optimization for cascade refrigeration system

Energy and Exergy Analysis of NH3/CO2 Cascade Refrigeration System with Subcooling in the Low-Temperature Cycle Based on an Auxiliary Loop of NH3 Refrigerants

Optimization and performance improvement of ultra-low temperature cascade refrigeration system based on the isentropic efficiency curve of single-screw compressor

A data-driven energy management strategy based on performance prediction for cascade refrigeration systems

Experimental study on the performance of a twin-screw CO 2 compressor in NH 3/CO 2 cascade refrigeration system

A Study On A New Auto-Cascade Refrigerating Cycle

Optimization Analyses on the Performance of an Auto-Cascade Absorption Refrigeration System Operating with Mixed Refrigerants

Performance of a Single-Stage Auto-Cascade Refrigerator Operating with a Rectifying Column at the Temperature Level of −60 °C

Theoretical analysis of three CO2/C3H8 (R744-R290) cascade refrigeration systems with precooling processes in low-temperature circuits

Experimental Studies on an Variable Compositions Auto-Cascade Refrigerator Operating With a Rectifying Column

Experimental and Theoretical Assessments on the Systematic Performance of a Single-Stage Air-Source Heat Pump Using Ternary Mixture in Cold Regions

Evaluation of Two-Phase Suction, Liquid Injection and Two-Phase Injection for Decreasing the Discharge Temperature of the R32 Scroll Compressor

Parametric analysis and performance prediction of an ultra-low temperature cascade refrigeration freezer based on an artificial neural network

Performance Comparison of Ultra-Low Temperature Cascade Refrigeration Cycles Using R717/R170, R717/R41 and R717/R1150 to Replace R404A/R23

Energy-saving-oriented control strategy for vapor compression refrigeration cycle systems

Performance Optimization of A Transcritical Co2 Refrigeration System Using A Controlled Ejector

Experimental Investigation on Twin Screw Refrigeration Compressor with Different Capacity Control Methods