Abstract:In order to deal with the shortcomings (such as poor robustness) of the traditional single-channel vibration signal in the comprehensive monitoring of the gearbox fault state, a multi-channel decision-level fusion algorithm was proposed based on symmetrized dot pattern (SDP) analysis, with the visual geometry group 16 network (VGG16) fault diagnosis model. Firstly, the SDP method was used to convert the vibration signal of a single multi-channel sensor into an imaging arm. Secondly, the obtained image arm was input into the VGG16 convolutional neural network in order to train the fault diagnosis model that can be obtained. Then, the SDP images of the signals that were to be measured from multiple multi-channel sensors were input into the fault diagnosis model, and the diagnosis results of multiple multi-channel sensors could then be obtained. Experimentally, it was demonstrated that the diagnostic results of multi-channel sensors one, two, and three were more accurate than those of single-channel sensors one, two, and three, by 3.01%, 16.7%, and 5.17%, respectively. However, the fault generation was not generated in a single direction, but rather multiple directions. In order to improve the comprehensiveness of the raw vibration data, a fusion method using DS (Dempster–Shafer) evidence theory was proposed in order to fuse multiple multi-channel sensors, in which the accuracy achieved 99.93% when sensor one and sensor two were fused, which was an improvement of 8.88% and 1.02% over single sensors one and two, respectively. When sensor one and sensor three were fused, the accuracy reached 99.31%, which was an improvement of 8.31% and 6.17% over single sensors one and three, respectively. When sensor two and sensor three were fused, the accuracy reached 99.91%, which was an improvement of 1.00% and 6.74% over single sensors two and three, respectively. When three sensors were fused simultaneously, the accuracy reached 99.99%, which was 8.93%, 1.08%, and 6.81% better than single sensors one, two, and three, respectively. Therefore, it can be proved that the number of sensor channels has a great influence on the diagnosis results.

Multiscale Cyclic Frequency Demodulation-Based Feature Fusion Framework for Multi-Sensor Driven Gearbox Intelligent Fault Detection

Investigation of a multi-sensor data fusion technique for the fault diagnosis of gearboxes

Gearbox Fault Diagnosis Method Based on Multidomain Information Fusion

Gearbox fault diagnosis based on RGT-MFFIN and multi-sensor fusion image generation

An Adaptive Multi-Sensor Data Fusion Method Based on Deep Convolutional Neural Networks for Fault Diagnosis of Planetary Gearbox

Multi-modal Data Cross-Domain Fusion Network for Gearbox Fault Diagnosis under Variable Operating Conditions

A Method Based On Multi-Sensor Data Fusion For Fault Detection Of Planetary Gearboxes

Multi-sensor data fusion for rotating machinery fault detection using improved cyclic spectral covariance matrix and motor current signal analysis

Gear fault diagnosis based on SVM and multi-sensor information fusion

Multi-Source Information Fusion Fault Diagnosis for Gearboxes Based on SDP and VGG

Gear Fault Diagnosis Method Based on Multi-Sensor Information Fusion and VGG

Gearbox Fault Diagnosis Based on Multi-Sensor and Multi-Channel Decision-Level Fusion Based on SDP

A multisensory time-frequency features fusion method for rotating machinery fault diagnosis under nonstationary case

A Multi-Fault Feature Detection and Separation Method for Multistage Gearbox

A convolutional multisensor fusion fault diagnosis framework based on multidimensional distance matrix for rotating machinery

Residual Gated Dynamic Sparse Network for Gearbox Fault Diagnosis Using Multisensor Data

Multi-scale CNN for Multi-sensor Feature Fusion in Helical Gear Fault Detection

Multi-Sensor Data Fusion Using a Relevance Vector Machine Based on an Ant Colony for Gearbox Fault Detection

Fault diagnosis of gearbox using empirical mode decomposition and multi-fractal detrended cross-correlation analysis

An Integrated Multi-Sensor Fusion-Based Deep Feature Learning Approach for Rotating Machinery Diagnosis

Multiscale Dynamic Fusion Global Sparse Network for Gearbox Fault Diagnosis