Abstract:In order to deal with the shortcomings (such as poor robustness) of the traditional single-channel vibration signal in the comprehensive monitoring of the gearbox fault state, a multi-channel decision-level fusion algorithm was proposed based on symmetrized dot pattern (SDP) analysis, with the visual geometry group 16 network (VGG16) fault diagnosis model. Firstly, the SDP method was used to convert the vibration signal of a single multi-channel sensor into an imaging arm. Secondly, the obtained image arm was input into the VGG16 convolutional neural network in order to train the fault diagnosis model that can be obtained. Then, the SDP images of the signals that were to be measured from multiple multi-channel sensors were input into the fault diagnosis model, and the diagnosis results of multiple multi-channel sensors could then be obtained. Experimentally, it was demonstrated that the diagnostic results of multi-channel sensors one, two, and three were more accurate than those of single-channel sensors one, two, and three, by 3.01%, 16.7%, and 5.17%, respectively. However, the fault generation was not generated in a single direction, but rather multiple directions. In order to improve the comprehensiveness of the raw vibration data, a fusion method using DS (Dempster–Shafer) evidence theory was proposed in order to fuse multiple multi-channel sensors, in which the accuracy achieved 99.93% when sensor one and sensor two were fused, which was an improvement of 8.88% and 1.02% over single sensors one and two, respectively. When sensor one and sensor three were fused, the accuracy reached 99.31%, which was an improvement of 8.31% and 6.17% over single sensors one and three, respectively. When sensor two and sensor three were fused, the accuracy reached 99.91%, which was an improvement of 1.00% and 6.74% over single sensors two and three, respectively. When three sensors were fused simultaneously, the accuracy reached 99.99%, which was 8.93%, 1.08%, and 6.81% better than single sensors one, two, and three, respectively. Therefore, it can be proved that the number of sensor channels has a great influence on the diagnosis results.

Residual Gated Dynamic Sparse Network for Gearbox Fault Diagnosis Using Multisensor Data

Multiscale Dynamic Fusion Global Sparse Network for Gearbox Fault Diagnosis

Investigation of a multi-sensor data fusion technique for the fault diagnosis of gearboxes

Gear Box Fault Diagnosis Based on Neural Network with Multi-Scale Weighted Fusion

Multi-modal Data Cross-Domain Fusion Network for Gearbox Fault Diagnosis under Variable Operating Conditions

Dual-Ensemble Multi-Feedback Neural Network for Gearbox Fault Diagnosis

An Adaptive Multi-Sensor Data Fusion Method Based on Deep Convolutional Neural Networks for Fault Diagnosis of Planetary Gearbox

Adaptive Multi-Channel Residual Shrinkage Networks for the Diagnosis of Multi-Fault Gearbox

Gearbox Fault Diagnosis Method Based on Multidomain Information Fusion

Multi-Source Information Fusion Fault Diagnosis for Gearboxes Based on SDP and VGG

Gearbox fault diagnosis based on RGT-MFFIN and multi-sensor fusion image generation

Application of Wavelet Dynamic Joint Adaptive Network Guided by Pseudo-Label Alignment Mechanism in Gearbox Fault Diagnosis

Data-driven Fault Diagnosis Method Based on Fusion of Multi-direction and Multi-source Signals

Gearbox incipient fault fusion diagnosis based on DSmT and wavelet neural network

Data imbalanced fault diagnosis of gearbox transmission system under various speeds based on dynamic dual-scale normalized fusion network

Fault Diagnosis of Gearbox Based on Refined Topology and Spatio-Temporal Graph Convolutional Network

A Sparse Approach to Fault Severity Classification for Gearbox Monitoring.

Gearbox Fault Diagnosis Based on Multi-Sensor and Multi-Channel Decision-Level Fusion Based on SDP

Self-Attention Parallel Fusion Network for Wind Turbine Gearboxes Fault Diagnosis

Multiscale Convolutional Neural Network Based on Channel Space Attention for Gearbox Compound Fault Diagnosis

Decision Self-Regulating Network for Imbalanced Working Conditions Identification in the Application of Gearbox Intelligent Fault Diagnosis