Abstract:Titanium matrix composites (TMC) have potential applications in the aerospace industry because of their excellent performance. The comprehensive performance of TMC mainly depends on the matrix, reinforcement and interface characteristics. Hence, this study discussed the knowledge of microstructure-property relationships in detail. Crack-free high-mass-proportion TiCp/Ti6Al4Vcomposites were successfully prepared by directed energy deposition (DED). As the TiCp mass fraction increasing from 0 to 50%, the quantity of primary TiC and unmelted TiC (UMT) increased. Meanwhile, the refined α-Ti in the composites had a relatively weak texture. In addition, the interface between primary TiC and α-Ti was a semi-coherent interface, exhibiting a <math>112-0</math> α-Ti // [110]TiC, <math>1-100</math> α-Ti // <math>1-11</math> TiC orientation relationship, which facilitated the heterogeneous nucleation of Ti and improved bonding of primary TiC with the matrix. With the increase in microhardness taking the form of a cubic function, the wear mechanism was found to transform from abrasive wear to slight delamination wear. Due to the fact that both UMT and primary TiC bonded well with Ti64 matrix, they shared partial friction to protect matrix from severe abrasion, resulting in an excellent wear resistance of composites. Moreover, the thermal conductivity of 50% TiCp/Ti6Al4V was 9.063 <math>W∙m-1∙K-1</math>, which was nearly 26.5% higher than that of Ti6Al4V. Owing to the premature cracking of brittle UMT and dendritic TiC, the tensile strength and elongation of the composite with 50% TiCp were 515.5 MPa and 1.83%, which decreased by 45.8% and 78.8%, respectively. Adding a high proportion of TiCp can significantly improve the hardness and wear resistance of TMC, whereas it is detrimental to the tensile performance of TMC. The study have significant implications for the design of novel TMC, particularly for the aerospace industrial applications.

Enhancing the Elevated Temperature Strength of Titanium Matrix Composites Through a Novel (α + Β) TRIPLEX Heat Treatment

High Temperature Tensile Properties of in Situ TiBw/Ti6Al4V Composites with a Novel Network Reinforcement Architecture

Electron Beam Welding and Post Heat Treatment of a New Near-Beta High-Strength Ti-4Al-5Mo-5V-5Cr-1Nb Alloy

Constructing Near-Network Microstructure via Heat Treatment for Synergistic Enhancement of Strength and Toughness in (TiB + TiC + La2O3)/TC4 Composite

Achieving near equiaxed α-Ti grains and significantly improved plasticity via heat treatment of TiB reinforced titanium matrix composite manufactured by selective laser melting

Construction of Three-Dimensional Network Morphology Titanium Matrix Composites Via Adding Nano B4C: As-built and Heat-Treated Scenarios

Synergistic strengthening behavior and microstructural optimization of hybrid reinforced titanium matrix composites during thermomechanical processing

Thermomechanical Processing of a Near-α Ti Matrix Composite Reinforced by TiBw

Unveiling the impact of heat treatment on powder-metallurgy α+β titanium alloy for achieving a superior strength-ductility combination

Enhanced high temperature performance of two-scale network-structured (TiB+Ti5Si3)/TA15 composites by simultaneous adjustment of matrix and nano-scaled Ti5Si3

Effect of heat treatment on microstructure, mechanical and tribological properties of in-situ (TiC+TiB)/TC4 composites by casting

The effect of heat treatment system on mechanical properties of titanium alloy BTi-6554

Achieving ultra-high strength in TiB/metastable-β composites via short-process technology

In-situ manipulation of TiB whisker orientation and investigation of its high-temperature mechanical properties in titanium matrix composites

Simultaneous Improvement in Strength and Ductility of TC4 Matrix Composites Reinforced with Ti1400 Alloy and In Situ-Synthesized TiC

Network-Strengthened Ti-6Al-4V/(TiC+TiB) Composites: Powder Metallurgy Processing and Enhanced Tensile Properties at Elevated Temperatures

Room temperature and high-temperature properties of extruded Ti-4Fe-3W/2TiC composites in α+β and β phases

Formability, densification behavior and hierarchical grain structure of laser-directed energy deposition of TiB reinforced titanium matrix composites

High-mass-proportion TiCp/Ti6Al4V titanium matrix composites prepared by directed energy deposition

Heat Treatment Behaviour of SLM-Built Titanium Matrix Composite: Microstructure and Tribological Performance

Enhanced high temperature mechanical properties and heat resistance of an Al–Cu–Mg–Fe–Ni matrix composite reinforced with in-situ TiB2 particles