Abstract:Harsh conditions of high temperature are often encountered during production and application of emulsions. For example, in crude oil recovery, the emulsification performance of natural emulsifiers in oil at elevated temperatures is crucial but rarely studied, largely due to the lack of appropriate apparatus. In the present work, the emulsion stabilization by asphaltenes and fines at elevated temperatures up to 200 degrees C was investigated by using a custom-made windowed cell, which permits real-time direct visualization of the emulsion phase. The temperature-reversibility of the prepared emulsions was analyzed under our controlled heating and cooling temperature cycle program. The resultant emulsions at room temperature from the proposed apparatus are consistent with the results obtained from the most widely used bottle test approach, confirming its validity. The emulsion volumes significantly reduced with the increasing temperature in both cases of asphaltenes and fines by 100% and 62% at maximum, respectively. The asphaltenes were unable to stabilize emulsions at the temperature of 150 degrees C and higher, while the fines can stabilize a 12 vol% emulsion layer even at 200 degrees C. Under our temperature cycle program, the asphaltenes-stabilized emulsions were reversible, indicating that the adsorption and desorption processes of asphaltenes from the interfaces did not irreversibly alter their interfacial activity. In contrast, the volumes of emulsions stabilized by the fines generally remained unchanged during the cooling operations, suggesting that the temperature-induced desorption of the Pickering particles from the interfaces irreversibly affects their re-adsorption. The high thermal stability of fines-stabilized emulsions is beneficial for their application in enhanced oil recovery at harsh reservoirs. The novel method of temperaturereversibility analysis is an effective tool to explore the stabilization mechanism of emulsion systems.(c) 2022 Elsevier B.V. All rights reserved.

Interfacial Crystallized Oleogel Emulsion with Improved Freeze-Thaw Stability and Tribological Properties: Influence of Cooling Rate

Enhanced Freeze-Thawing Stability of Water-in-oil Pickering Emulsions Stabilized by Ethylcellulose Nanoparticles and Oleogels.

Cryogelation of Alginate Improved the Freeze-Thaw Stability of Oil-in-water Emulsions.

Tuning the Rheological and Tribological Properties to Simulate Oral Processing of Novel High Internal Phase Oleogel-in-water Emulsions

Improved stability of (W 1 /O/W 2 ) double emulsions based on dual gelation: Oleogels and hydrogels

Structural Responses of Zein-Based Oil-in-glycerol Emulsion Gels During Freeze-Thawing and Heating

Fabrication And Characterization Of Oleogel Stabilized By Gelatin-Polyphenol-Polysaccharides Nanocomplexes

Toward an Improved Understanding of Emulsion Stabilization at Elevated Temperatures by Direct Visualization and Reversibility Analysis

Preparation of High Freeze-Thaw Stable Wheat Gluten-Based Emulsions by Incorporated Deep Eutectic Solvents

Improving the Freeze–thaw Stability of Emulsions Via Combining Phosphatidylcholine and Modified Starch: A Combined Experimental and Computational Study

Discovering Novel Cryo-Oleofoams with Excellent Overrun: Synergistic Effect Between Zein and Monoglyceride at Interface

Influence of Particle Size and Ionic Strength on the Freeze-Thaw Stability of Emulsions Stabilized by Whey Protein Isolate

Influence of ionic strength and thermal pretreatment on the freeze-thaw stability of Pickering emulsion gels.

Improving Freeze-Thaw Stability of Soy Nanoparticle-Stabilized Emulsions Through Increasing Particle Size and Surface Hydrophobicity

Effect of Cooling Rate on Properties of Beeswax and Stearic Acid Oleogel Based on Rice Bran Oil and Sesame Oil

Effect of Heat Treatment on the Stability of Ultrasound-Assisted Cross-Linked Myofibrillar Protein-Stabilized Emulsion Filler Phases Via Rheology and Tribology

Physicochemical stability of oleogel-in-water emulsions loaded with 13-carotene against environmental stresses

Soft meets hard -- how does freeze-thaw cycling affect the microstructure of particle-stabilised emulsions?

Improve the Physical and Oxidative Stability of O/W Emulsions by Moderate Solidification of the Oil Phase by Stearic Acid

Insights into the Thermal Responsiveness of W/O Emulsions with Nanoparticles and Oleogels As Building Blocks

Effect of diacylglycerol interfacial crystallization on the physical stability of water-in-oil emulsions.