Particle emissions from submerged combustion evaporation of membrane-concentrated leachate

Xinwei Dong,Mingchun Li,Xunming Zhang,Chu Tang,Dongbei Yue

DOI: https://doi.org/10.1016/j.jclepro.2023.139861

IF: 11.1

2024-01-01

Journal of Cleaner Production

Abstract:The submerged combustion evaporation process, which is extensively utilized in the treatment of high salinity wastewater, inevitably confronts the challenge of particle emissions. These emissions significantly impact the local environment and pose substantial health risks to on-site workers. Currently, the understanding of particle emissions' characteristics and their critical conditions during direct-contact heat and mass transfer processes is limited, which hampers the development of effective strategies for particle control. Here, particles emitted from three evaporation projects with different membrane-concentrated leachate sources were first characterized. Most of the particles were ultrafine particles (<= 100 nm) in the range of 6-500 nm, most of which were in the range of 30 nm and constituted 75.37%-89.98% of the total mass. The particles were mainly composed of inorganic ions (80.86%-86.88%), humus (1.95%-3.66%) and insoluble carbon (2.57%-4.26%). The particle concentrations range from 1.64 to 218.35 mg/m3, depending on factors such as bubble temperature, evaporation capacity, and leachate composition within evaporators. A model assessing particle release capacities showed an increase with rising bubble temperature and humus concentration. A critical bubble temperature of 1390 K was identified for significant particle release, highlighting the need to keep the bubble temperature below this level to manage heat-induced particle release within 2 mg/m3. Additionally, the high humus migration capacity to particles underscores the need to prioritize humus removal before evaporation in particle control strategies. The application of these strategies can significantly decrease particle emissions, fostering cleaner production during submerged combustion evaporation and other direct-contact heat and mass transfer processes.