Abstract:Manufacturing-induced surface defects are deemed as a potential source, leading the laser-induced damage threshold (LIDT) of the actual KDP crystal optics to be much lower than the intrinsic one. However, the underlying mechanisms have not been fully recognized. We explore the combined modulation of incident laser light by multiple scratches and their effects on laser damage performance of KDP optics by modeling the light intensifications and performing a laser damage test. Under the combined modulation of multiple scratches, enhanced hot spots are generated due to the focusing effects of convex lens profiles surrounded by the neighboring scratches. The combined modulation actions are much stronger than that of a single scratch. The relative light intensities (IRs) caused by multiple scratches can reach up to two times, and the number of hot spots (IPs) are four times as large as those by a single scratch. The IRs exhibit a general, increasing tendency as the scratch density increases. But for the case of double total reflections of rear-surface scratches, the totally reflected lights are transmitted through neighboring scratches, resulting in decreasing tendency of IRs. The tested LIDTs and optical transmittances of multiple scratches present a gradual, decreasing tendency with the increase of scratch density, which agrees with the simulation results. Besides, the simulated light intensifications could well explain the locations of laser damage, which further verify the role of multiple scratches in lowering the laser damage resistance.

Effect of Optical Fiber End Face Scratches on Laser-Induced Damage Threshold.

Researches on Laser Damage Resistance of Optical Films

Combined Modulation of Incident Laser Light by Multiple Surface Scratches and Their Effects on the Laser Damage Properties of KH2PO4 Crystal.

Characterization of manufacturing-induced surface scratches and their effect on laser damage resistance performance of diamond fly-cut KDP crystal

Effects of Fiber Endface Scratches on Return Loss Performance of Optical Interface

Effect of Brittle Scratches on Transmission of Optical Glass and Its Induced Light Intensification During the Chemical Etching

Laser-induced damage threshold based on thermal effects in high-purity silica optical fiber

Analysis and Experimental Investigation of Laser Induced Damage of Optics

Laser Damage Performance Study of Fundamental Frequency Dielectric Film Optical Elements

Scratch Types and Damage Thresholds of Fused Silica

Numerical Simulation of Light Intensity Distribution in the Vicinity of Three-Dimensional Hertzian Conical Scratch on Fused Silica Subsurface

Experiment of Laser Induced Damage Threshold for Different Sub-Surface Cracks on Fused Silica

Investigation of Subsurface Damage Density and Morphology Impact on the Laser-Induced Damage Threshold of Fused Silica

Analysis on the Effects of Fiber End Face Scratches on Return Loss Performance of Optical Fiber Connectors

Laser-Induced Damage Initiation and Growth of Optical Materials

Generation of Scratches and Their Effects on Laser Damage Performance of Silica Glass

Mitigation Scratch on Fused Silica Optics Using Co2 Laser

Effect of laser ablation on the conductivity and laser-induced damage threshold of fused silica components

Characterization of artificial indentation defects in fused silica surface and its damage performance under 355 nm nanosecond laser

Characterization of 355 Nm Laser-Induced Damage of Mitigated Damage Sites in Fused Silica

Simulation Study On The Influence Of Subsurface Deficiency On Fused Silica Laser Damage Threshold