Abstract:High efficiency, uniform power distribution, and broadband working of beam splitters are of crucial importance for large format heterodyne array receivers at terahertz frequencies. We present two types of quad-beam splitters (QBSs) based on coding metamaterials, designed to generate 1 x 4 and 2 x 2 beams respectively in the THz range. The designed metasurfaces are composed of a periodic array of metal-dielectric-metal (MDM) scattering unit cells, thus introducing a well-designed phase shift in the electromagnetic wave. For normally incident electromagnetic waves, the simulation results show that the 2 x 2 QBS has higher power efficiency and broader bandwidth in comparison with the 1 x 4 QBS. The 2 x 2 QBS works well in that the power efficiency is larger than 70% and the power distribution difference of the main beams is less than 2.8% in the range of 0.75-1.35 THz, which indicates an ultra-broad frequency range up to 57.1%. Meanwhile, under oblique incidence, the power distribution and the power efficiency among the 2 x 2 quad-beam nearly remain stable when the wave incident is within 40-degree. A prototype is fabricated and the 2 x 2 QBS behavior is experimentally demonstrated at 0.85 THz, where the power efficiency is as high as 70.4% and the power distribution of each beam approximately is uniform under the 20-degree incidence. To further improve the efficiency of astronomical observations, a 36-beam splitter is designed by using a simple two-dimensional addition method, and the power efficiency can reach 89.9% at 0.85 THz, and the working bandwidth is 57.1% from 0.75 to 1.35 THz with evenly distributed main beams. The simulation results show that the beam splitting function can also be well realized under the waves with 20-degree oblique incidence. Compared to conventional Fourier phase gratings, the metasurface-based beam splitters provide broadband performance and a simpler fabrication process, which is very expected in compact heterodyne array receiver systems.

Multiple-Output and Arbitrary Power-Ratio Beam Splitter on Dielectric Metasurface

Switchable Phase and Polarization Singular Beams Generation Using Dielectric Metasurfaces

Tunable Beam Splitter Using Bilayer Geometric Metasurfaces in the Visible Spectrum.

Metasurface-Based Free-Space Multi-port Beam Splitter with Arbitrary Power Ratio

High-Efficiency, Dual-Band Beam Splitter Based on an All-Dielectric Quasi-Continuous Metasurface

Splitting Arbitrary Polarized Light with a Flat Dielectric Metagrating

Metasurface-Based Ultrathin Beam Splitter with Variable Split Angle and Power Distribution

Highly Efficient Beam Splitter Based on All-Dielectric Metasurfaces

Polarization-Insensitive Metasurface with High-Gain Large-Angle Beam Deflection

The Comprehensive Design of Power Distribution, Polarizations, and Radiate Angles for Split Beams Using Transmission Metasurfaces

Polarization sensitive terahertz all dielectric continuous trapezoid metasurface beam splitter

Broadband Terahertz Multi-Beam Splitters with Uniform Power Distribution Based on Coding Metasurfaces

Rochon-Prism-Like Planar Circularly Polarized Beam Splitters Based on Dielectric Metasurfaces

All-dielectric metasurfaces for intensity-controllable beam splitting and polarization conversion

Transmission-type terahertz beam splitter through all-dielectric metasurface

On‐Chip Metaline for Multiport Beam Splitting

Ultrabroadband, Compact, Polarization Independent and Efficient Metasurface-Based Power Splitter on Lithium Niobate Waveguides.

Multi-channel beam splitters based on gradient metasurfaces

Particle Swarm Optimized Polarization Beam Splitter Using Metasurface-Assisted Silicon Nitride Y-junction for Mid-Infrared Wavelengths

Highly uniform and efficient, broadband meta-beam-splitter/combiner

Quasi-Freeform Metasurfaces for Wide-Angle Beam Deflecting and Splitting