Abstract:High efficiency, uniform power distribution, and broadband working of beam splitters are of crucial importance for large format heterodyne array receivers at terahertz frequencies. We present two types of quad-beam splitters (QBSs) based on coding metamaterials, designed to generate 1 x 4 and 2 x 2 beams respectively in the THz range. The designed metasurfaces are composed of a periodic array of metal-dielectric-metal (MDM) scattering unit cells, thus introducing a well-designed phase shift in the electromagnetic wave. For normally incident electromagnetic waves, the simulation results show that the 2 x 2 QBS has higher power efficiency and broader bandwidth in comparison with the 1 x 4 QBS. The 2 x 2 QBS works well in that the power efficiency is larger than 70% and the power distribution difference of the main beams is less than 2.8% in the range of 0.75-1.35 THz, which indicates an ultra-broad frequency range up to 57.1%. Meanwhile, under oblique incidence, the power distribution and the power efficiency among the 2 x 2 quad-beam nearly remain stable when the wave incident is within 40-degree. A prototype is fabricated and the 2 x 2 QBS behavior is experimentally demonstrated at 0.85 THz, where the power efficiency is as high as 70.4% and the power distribution of each beam approximately is uniform under the 20-degree incidence. To further improve the efficiency of astronomical observations, a 36-beam splitter is designed by using a simple two-dimensional addition method, and the power efficiency can reach 89.9% at 0.85 THz, and the working bandwidth is 57.1% from 0.75 to 1.35 THz with evenly distributed main beams. The simulation results show that the beam splitting function can also be well realized under the waves with 20-degree oblique incidence. Compared to conventional Fourier phase gratings, the metasurface-based beam splitters provide broadband performance and a simpler fabrication process, which is very expected in compact heterodyne array receiver systems.

Metasurface-Based Ultrathin Beam Splitter with Variable Split Angle and Power Distribution

Tunable Beam Splitter Using Bilayer Geometric Metasurfaces in the Visible Spectrum.

High-Efficiency, Dual-Band Beam Splitter Based on an All-Dielectric Quasi-Continuous Metasurface

Splitting Arbitrary Polarized Light with a Flat Dielectric Metagrating

The Comprehensive Design of Power Distribution, Polarizations, and Radiate Angles for Split Beams Using Transmission Metasurfaces

Polarization-Insensitive Metasurface with High-Gain Large-Angle Beam Deflection

Metasurface-Based Free-Space Multi-port Beam Splitter with Arbitrary Power Ratio

Multi-channel beam splitters based on gradient metasurfaces

Particle Swarm Optimized Polarization Beam Splitter Using Metasurface-Assisted Silicon Nitride Y-junction for Mid-Infrared Wavelengths

Design of Transmissive Terahertz Beam Splitter based on Phase Gradient Metasurface

Nanoscale Beam Splitters Based on Gradient Metasurfaces

Multiple-Output and Arbitrary Power-Ratio Beam Splitter on Dielectric Metasurface

Polarization sensitive terahertz all dielectric continuous trapezoid metasurface beam splitter

Silicon Metasurface-Based Infrared Polarizing Beam Splitter with On-Demand Deflection Angles

Broadband Terahertz Multi-Beam Splitters with Uniform Power Distribution Based on Coding Metasurfaces

Highly uniform and efficient, broadband meta-beam-splitter/combiner

Tunable Beam Splitter Based on Acoustic Binary Metagrating

Transmission-type terahertz beam splitter through all-dielectric metasurface

Quasi-Freeform Metasurfaces for Wide-Angle Beam Deflecting and Splitting

Rochon-Prism-Like Planar Circularly Polarized Beam Splitters Based on Dielectric Metasurfaces

Compacted Splitter Based On The Interlaced Metallic Particle Arrays