Abstract:Although the parallel mechanisms have the advantages of high accuracy, velocity, stiffness, and payload capacity, the shortcomings of the space utilization and workspace limit the applications in the confined space. A novel 3 degrees of freedom spatial parallel manipulator 3-PSR-O (prismatic-spherical-revolute) is proposed, which possesses a compact architecture and extended workspace while maintaining the inherent advantages of the parallel mechanisms. The direct-inverse position, singularity and workspace are investigated. The mapping method is adopted in the position analysis, and the closed form solution is derived in the form of a six order equation. The singularity analysis of the mechanism is also carried out based on the geometrical constraints, including six singularity boundaries. A feature boundary, which is independent of the prismatic joints' stroke limit, is obtained by integrating the six singularity boundaries. According to the formation of the reachable workspace, a concept of basic workspace is also introduced and presented in the analytical way. By demarcating the basic workspace along the central height with the feature boundary, the reachable workspace can be derived and analyzed more efficiently. Finally, a comparative study on the space utilization between the 3-PSP parallel mechanism and the new mechanism is also presented. The area of feature boundary of the new mechanism is about 140% of the 3-PSP parallel mechanism, while its installation radius is only 1/2 of the 3-PSP parallel mechanism. The proposed parallel mechanism shows great space utilization, and is ideally suited for applications in confined space occasions such as immersion lithography, nano-imprint etc.

A New Workspace and Structural Parameter Optimization Method of Parallel Robot

Workspace Analysis of a Novel 5-SPS-UPU Parallel Robot Manipulator.

Robustness Multi-Objective Optimization for Parallel Robot Based on Subregional Meta-Heuristic Iteration

Robot Workspace Optimization based on Monte Carlo Method and Multi Island Genetic Algorithm

Optimization method of serial manipulator structure

Kinematics and workspace analysis of 4SPRR-SPR parallel robots

Position, Singularity and Workspace Analysis of 3-Psr-o Spatial Parallel Manipulator

Numerical workspace optimization for a 3-DOF delta parallel robot on constrained geometric solid models

Multi-objective Parameters Optimization Design of a Novel 3-DOF Parallel Robot

Workspace optimization of a humanoid robotic arm based on the multi-parameter plane model

A New Resolution Of Workspace Problem Of Parallel Machine Tool

Workspace Analysis of a Novel Parallel Robot Named 3-R2H2S with Three Freedoms

Workspace-based Architecture Optimization of a 4RRR Parallel Kinematic Machine with Actuation Redundancy

Optimization design of a parallel surgical robot with remote center of motion

Design Optimization of 6-HTRT Parallel Robot Orientated on Workspace

Conceptual Design and Kinematic Analysis of a Novel Parallel Robot for High-Speed Pick-and-place Operations

Design and Workspace Optimization of a 6/6 Cable-Suspended Parallel Robot

Workspace and Dynamic Performance Evaluation of the Parallel Manipulators in A Spray-Painting Equipment

Dynamic Bacterial Foraging Optimization Algorithm to Optimal Design of Parallel Manipulators

Optimizing the kinematic chains for a spatial parallel manipulator via searching the desired dexterous workspace