Abstract:We develop a hybrid optofluidic microcavity by placing a microsphere with a diameter ranging from 1 to 4 μm in liquid-filled plano-plano Fabry–Perot (FP) cavities, which can provide an extremely low effective mode volume down to 0.3–5.1 μm3 while maintaining a high Q-factor up to 1×104–5×104 and a finesse of ∼2000. Compared to the pure plano-plano FP cavities that are known to suffer from the lack of mode confinement, diffraction, and geometrical walk-off losses as well as being highly susceptible to mirror misalignment, our microsphere-integrated FP (MIFP) cavities show strong optical confinement in the lateral direction with a tight mode radius of only 0.4–0.9 μm and high tolerance to mirror misalignment as large as 2°. With the microsphere serving as a waveguide, the MIFP is advantageous over a fiber-sandwiched FP cavity due to the open-cavity design for analytes/liquids to interact strongly with the resonant mode, the ease of assembly, and the possibility to replace the microsphere. In this work, the main characteristics of the MIFP, including Q-factor, finesse, effective mode radius and volume, and their dependence on the surrounding medium’s refractive index, mirror spacing, microsphere position inside the FP cavity, and mirror misalignment, are systematically investigated using a finite-element method. Then, by inserting dye-doped polystyrene microspheres of various sizes into the FP cavity filled with water, we experimentally realize single-mode MIFP optofluidic lasers that have a lasing threshold as low as a few microjoules per square millimeter and a lasing spot radius of only ∼0.5 μm. Our results suggest that the MIFP cavities provide a promising technology platform for novel photonic devices and biological/chemical detection with ultra-small detection volumes.

Tunable Single-wavelength Fiber Laser Based on a Microbubble Cavity

A Simple Approach to Fiber-Based Tunable Microcavity with High Coupling Efficiency

Tunable and Programmable Fiber Ring Laser Based on Digital-Controlled Chirped Fiber Bragg Grating

High-Q, Low-Mode-volume Microsphere-Integrated Fabry–Perot Cavity for Optofluidic Lasing Applications

A Tunable All-Fiber Filter Based on Microfiber Loop Resonator

Fiber-Integrated Reversibly Wavelength-Tunable Nanowire Laser Based on Nanocavity Mode Coupling.

Tunable, Single-Wavelength Fiber Laser Based on Hybrid Microcavity Functionalized by Atomic Layer Deposition

Tunable Ultra‐Narrow Linewidth Light Source Through Liquid Crystal‐Assisted Mini‐Bound‐States‐In‐Continuum Cavities

Fast and Wide-Band Tuning Single-Mode Microlaser Based on Fiber Fabry–Pérot Microcavities

A Widely Tunable Single-Longitudinal-mode Ytterbium-Doped Fiber Laser Based on Fiber Lyot Filter

Tunable V-Cavity Semiconductor Laser And Modules

Full-Band Tunable V-Cavity Laser for Low-Cost Access and Data Center Networks

Widely Tunable Multi-Wavelength Fiber Laser Based on Cascaded Stimulated Brillouin Scattering in A Compact Linear Cavity

Simple and Compact V-cavity Semiconductor Laser with 50×100 GHz Wavelength Tuning.

Tunable, Ultra-Narrow-Band Optical Filter Based on A Whispering Gallery Mode Hybrid-Microsphere

Tunable multidimensional multiplexed Q-switched pulse outputs from a linear fiber laser with a bidirectional loop

Tunable narrow-linewidth fiber laser based on an optically controlled tunable filter

Tunable Erbium-Doped Fiber Ring Laser Based on an All-Fiber Filter

Strain-based tunable optical microresonator with an in-fiber rectangular air bubble.

The Introduction of a Cavitation Bubble in Polymer-Capped Fiber Temperature Sensor to Increase Its Wavelength Demodulation Range

Broadband tunable single-frequency Yb-doped fiber laser with dual ring subcavity and Sagnac ring filter