Large dynamic range athermal LNOI/TiO<inf>2</inf> nanobeam electric field sensor

Xinyu Ma,Chijie Zhuang,Rong Zeng,Weidong Zhou

2021-01-01

Abstract:Integrated optical E-field sensor based on nanobeam cavity is reported. Theoretical E <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">min</inf> is 0.15 V/m. Temperature-induced resonant wavelength variation is within 3 pm/°C in the range of -40 to 40 °C.

What problem does this paper attempt to address?

Large dynamic range athermal LNOI/TiO2 nanobeam electric field sensor

Xinyu Ma,Chijie Zhuang,Rong Zeng,Weidong Zhou

2021-01-01

Abstract:Integrated optical E-field sensor based on nanobeam cavity is reported. Theoretical E-min is 0.15 V/m. Temperature-induced resonant wavelength variation is within 3 pm/degrees C in the range of -40 to 40 degrees C. (C) 2021 The Author(s)
Large dynamic range athermal LNOI/TiO2 nanobeam electric field sensor

Xinyu Ma,Chijie Zhuang,Rong Zeng,Weidong Zhou

DOI: https://doi.org/10.1364/cleo_at.2021.ath4q.3

2020-01-01

Abstract:Integrated optical E-field sensor based on nanobeam cavity is reported. Theoretical E-min is 0.15 V/m. Temperature-induced resonant wavelength variation is within 3 pm/degrees C in the range of -40 to 40 degrees C. (C) 2021 The Author(s)
Large-dynamic-range athermal lithium niobite on insulator/ TiO2 nanobeam electric field sensor

Xinyu Ma,Chijie Zhuang,Rong Zeng,Weidong Zhou

DOI: https://doi.org/10.1088/1361-6463/abcf73

2021-01-01

Abstract:An integrated optical electric field (E-field) sensor based on a one-dimensional photonic crystal nanobeam cavity on a lithium niobite on insulator (LNOI) platform is reported here. It has a large dynamic range and extreme sensitivity. The dielectric resonant mode has a quality factor Q 10(5). The waveguide-coupled structure, only 25 mu m long, is beneficial for future on-chip integration. The use of TiO2 compensates for the thermo-optical effect of lithium niobite (LN), while the high dielectric constant of TiO2 influences the E-field distribution. A tri-layer TiO2/LNOI/TiO2 nanobeam structure is proposed to improve electro-optical modulation efficiency in LN. Detailed analysis of noise sources shows the theoretical minimum detectable E-field to be 0.15 V m(-1) with a dynamic range of 83 dB. The temperature-induced resonant wavelength variation is within 3 pm degrees C-1 in the range of -40 degrees C to 40 degrees C.
TiO2nanowire Array Based Interferometric Sensor

YANG Yang,HE Hao,LI Qiu-shun,SHI Jian-guo,LI Ming-Yu,DONG Wen-fei

DOI: https://doi.org/10.3788/co.20140703.0421

2014-01-01

Abstract:In this work, a new TiO2 nanowire array based interferometric sensor had been developed .At first, TiO2 nanowire array films were prepared on the surface of conductive FTO glass through hydrothermal synthesis method .Then , a new type of interferometric film sensor based on wavelength modulation was constructed by u-tilizing the compound structure FTO glass with TiO 2 nanowire array thin film as the sensing chip and making use of the typical Kretschmann prism coupling structure .Finally, the response performance of the interfero-metric sensor to ambient refractive index was displayed by employing sodium chloride aqueous solution as the measured liquid media .The results show that the sensor has a preferable response to refractive index over the range of 1.333 5~1.360 4 .In the case of TM mode , there is a good linear relationship between reflectometric light intensity and NaCl concentration in the range of 0%to 3%and 3%to 15%quality percentage , respec-tively.For TE mode, within the range of 0 to 3%NaCl concentration, it shows a negative linear relationship between NaCl concentration and the absorption intensity while the resonant wavelength is basically unchanged ;within the range of 3 to 15%NaCl concentration , with the increase of NaCl concentration , the resonant wave-length is gradually red shifted and it exhibits a positive linear relationship between NaCl concentration and res -onant wavelength .
A Two-Dimensional LiNbO3 Photonic E-Field Sensor Using Inclined Dipole Antennas

Kang Xiao,Xiaofeng Jin,Xiangdong Jin,Xianbin Yu,Xianmin Zhang,Hao Chi,Shilie Zheng

DOI: https://doi.org/10.1109/lawp.2017.2706323

IF: 4.2

2017-01-01

IEEE Antennas and Wireless Propagation Letters

Abstract:A novel integrated opto-electric sensor for detecting two-dimensional (2-D) electric field (E-field) vector utilizing two inclined dipole antennas on one lithium niobate (LiNbO 3 ) substrate is proposed and demonstrated. Two tapered antennas with inclination angles of 45° and 135° are fabricated on different Mach-Zehnder interferometer (MZI) optical waveguides so as to induce local E-fields within antenna gaps to modulate optical waves for separately measuring two E-field components. Experimental results show that polarization directions of the two inclined antennas are orthogonal. The minimum detectable E-field strength is 1.56 and 0.90 V/m for two MZIs, and the fabricated E-field sensor has a wideband frequency response from 1 to 6 GHz with ±8-dB fluctuations. The proposed integrated LiNbO 3 photonic E-field sensor has the potential of 2-D E-field vector measurement.
High sensitivity thin-film lithium niobate electric field sensor

Xinyu Ma,Xiangdong Liu,Chijie Zhuang,Rong Zeng

DOI: https://doi.org/10.1109/ICHVE53725.2022.9961756

2022-01-01

Abstract:Optical electric field (E-field) sensors have advantages of low invasiveness, wide bandwidth, high spatial resolution and optical isolation. The paper introduces high sensitivity E-field sensors based on the sub-micron-thick thin-film lithium niobate (LN) platform. Design, fabrication and measurements are carried out to demonstrate the novel optical E-field sensor.
Broadband Electric Field Sensor with Large Dynamic Range and High Sensitivity Based on Lithium Niobate on Insulator

Zhao Liu,Hao Wu,Wenhao Du,Lan Zhao,Mengke Wang,Bao Sun,Zhiyao Zhang,Shangjian Zhang,Yong Liu

DOI: https://doi.org/10.1109/lpt.2022.3205054

IF: 2.6

2022-01-01

IEEE Photonics Technology Letters

Abstract:A broadband integrated electric field sensor is proposed and demonstrated based on Lithium niobate on insulator (LNOI). The sensor is realized by using an asymmetrical Mach-Zehnder interferometer configuration and an array of tapered dipole antennas. The fabricated sensor can achieve electric field sensing in the frequency range of 0.1 GHz to 26.5 GHz. For the electric field at 0.1 GHz, measurement is achieved in the amplitude range of 40 mV/m to 6 kV/m. The maximum measurable amplitude is calculated to be 28.6 kV/m. Hence, the theoretical dynamic range and the normalized sensitivity are 117 dB and 8.8 mV/m/Hz1/2, respectively.
Integrated Optical Electric Field Sensor from 10 Khz to 18 GHz

Biao Sun,Fushen Chen,Kaixin Chen,Zhijian Hu,Yongqian Cao

DOI: https://doi.org/10.1109/lpt.2012.2195780

IF: 2.6

2012-01-01

IEEE Photonics Technology Letters

Abstract:A lithium niobate (LiNbO 3 )-based integrated optical sensor with Mach-Zehnder optical waveguide interferometer and tapered antenna array was designed and fabricated for electric field detection. Experimental results reveal that this sensor has a frequency response deviation less than ±10 dB within the range of 10 kHz to 18 GHz, and its minimum detectable electric field intensity is 0.4 V/m. Moreover, a pulsed electric field with nanoseconds width and electric field intensity of 103 V/m have been detected by this sensor.
Integrated High-Q Optomechanical Nanobeam Cavity for Refractive Index Sensing

Fei Pan,Kaiyu Cui,Guoren Bai,Xue Feng,Fang Liu,Wei Zhang,Yidong Huang

DOI: https://doi.org/10.1109/OECC.2018.8730122

2018-01-01

Abstract:We demonstrate a sensitive refractive index sensing approach by using an integrated high-Q optomechanical cavity based on silicon nanobeam in ambient environment. The sensing resolution as high as δλ /λ <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">0</inf> ~ 10 −8 can be evaluated experimentally.
Micro Optical E-field Sensor for Intense Electric Field Measurement

Zhecheng Zhang,Jinliang He

DOI: https://doi.org/10.1109/ichve61955.2024.10676269

2024-01-01

Abstract:In order to meet the requirements of wide-range and wide-area measurement of voltage in power systems, the integration and miniaturization of electric field sensors have become a major trend. Optical electric field sensors have the advantages of high sensitivity, high immunity and wide frequency response range. With the improvement of thin-film lithium niobate (TFLN) etching technology, we propose a micro optical electric field sensor based on a TFLN waveguide structure with the advantages of small size, high linearity and large dynamic range. The sensor achieves intense electric field measurements of more than $100 \mathrm{kV} / \mathrm{m}$. The dynamic range can reach more than 86 dB.
Integrated Optical Electric Field Sensor with Array Conical Dipole Antenna Electrodes Based on Lithium Niobate

Zhao Liu,Shangpeng Ding,Hao Wu,Bao Sun,Yong Liu,Bo Peng

DOI: https://doi.org/10.1117/12.2617515

2022-01-01

Abstract:Electric field measurement plays a significant role in various scientific and technical areas. Here we propose an electric field sensor by using array conical dipole antenna electrodes modulator based on lithium niobate, with 0.12V/m minimum detectable electric field and 82V/m measuring range. The frequency response bandwidth is up to 18GHz.
An Integrated Optical Waveguide E-field Sensor with Segmental Electrodes

FS Chen,K Qiu

DOI: https://doi.org/10.1109/icccas.2005.1493473

2005-01-01

Abstract:An integrated optical waveguide E-field sensor with segmental electrodes using a proton-exchanged LiNbO(3) Mach-Zehnder (M-Z) interferometer has been designed and fabricated. The device consists of ten sections of electrode and its structure size is 60 x 6 x 0.5 mm. The experimental results show that the minimum detectable electric field is 60 mv/m with the bandwidth of 10 MHz similar to 3.6 GHz in the detecting condition for optical power, which has a signal-noise ratio of 5 dB.
Optical Temperature Sensor Based On Zno Thin Film'S Temperature-Dependent Optical Properties

Chenghua Sui,Juan Xia,Helin Wang,Tianning Xu,Bo Yan,Yuling Liu

DOI: https://doi.org/10.1063/1.3616361

IF: 1.6

2011-01-01

Review of Scientific Instruments

Abstract:A reflective fiber temperature sensor system based on the ZnO thin film is proposed. The transmittance spectra and temperature dependent optical property of the sensing head with ZnO thin film is investigated theoretically and experimentally, and the temperature resolution of similar to 1 degrees C is obtained in the temperature region of 300-773 K. The temperature sensing system is only related to the wavelength shift of transmittance spectra, and has a high stability without depending on the incident light intensity. This research results also indicate a fiber optical sensor with a broad temperature measurement range (10-1800 K) can be gained as a promising temperature sensing device, and can be applied into some extremely environments, such as aircraft, nuclear power station and power transmission system, and so on. (C) 2011 American Institute of Physics. [doi:10.1063/1.3616361]
Thermo-Optical Tuning Cascaded Double Ring Sensor With Large Measurement Range

Zhiping Yang,Yanlu Wang,Chang Su,Liyang Shao,Jian-Jun He,Mingyu Li

DOI: https://doi.org/10.3390/s20185149

IF: 3.9

2020-01-01

Sensors

Abstract:In this paper, a thermo-optic tuning optical waveguide sensor system based on a cascaded double micro-ring resonator is investigated. The system consists of a micro-ring resonator with the microheater as a reference ring and a micro-ring resonator with removing the upper cladding layers as a sensing ring, combined with a microfluidic control. The refractive index change of the sample is measured by the electric power change of the microheater. The experimental results show that the sensitivity of the thermo-optic tuning is 34.231 W/RIU (refractive index units), and the measurement range is 4.325 x 10(-3)RIU, almost eight times larger than that of the cascaded double micro-ring resonator without thermo-optic tuning for the intensity interrogation.
Improving Thermal Stability of LiNbO 3 Based Electro‐optical Electric Field Sensor by Depositing a TiO 2 Film

She Wang,Hai Wang,Chanxiao Li,Chijie Zhuang,Rong Zeng

DOI: https://doi.org/10.1049/hve2.12198

IF: 4.967

2022-01-01

High Voltage

Abstract:Electro-optic electric field sensors based on LiNbO3 are widely used for the measurement of electric fields or transient voltages. However, the working bias of the sensor is influenced by the temperature due to the thermo-optic effect of LiNbO3. An athermal electrooptic electric field sensor was demonstrated by coating a thin layer of TiO2 film which has a negative thermo-optic coefficient, on the common-path interferometer based sensor to compensate LiNbO3's positive thermo-optic coefficient. Both calculation and experimental studies were conducted. The experimental results reasonably agree well with the calculated values, and the results show the sensor coated with a 640 nm thick TiO2 film has a much smaller temperature dependence of 0.011 degrees/degrees C compared to the initial value of 0.1 degrees/degrees C.
Integrated Photonic Electric Field Sensor Operating More Than 26 GHz

Jiahong Zhang,Fushen Chen,Bin Liu

DOI: https://doi.org/10.1109/lmwc.2020.3019448

IF: 3

2020-10-01

IEEE Microwave and Wireless Components Letters

Abstract:An integrated photonic electric field sensor comprised of a tapered antenna array and an optical waveguide asymmetric Mach–Zehnder interferometer (MZI) has been fabricated and experimentally demonstrated. The tapered antenna array is fabricated across the MZI for a broadband receiving of the electromagnetic (EM) wave. The phase of the light beam traveling in the optical waveguide therefore changes based on the electro-optic (EO) effect of the LiNbO3 (LN) crystal, and so does the amplitude of the output end of the MZI. The packaged sensor is only $55times 15times 10$ mm3 in size. Experimental results reveal that the response deviation of the sensor is within ±10 dB from 100 kHz to 26.5 GHz. Moreover, the minimum detectable electric field of the sensor is 245 mV/m, and the intense nanosecond EM pulse (EMP) with peak amplitude of 25 kV/m has been detected in the time domain.

engineering, electrical & electronic
Refractive Index Insensitive Temperature Sensor Based On A Photonic Crystal Nanobeam Cavity

Xuepei Li,Chao Wang,Zheng Wang,Zhongyuan Fu,Fujun Sun,Huiping Tian

DOI: https://doi.org/10.1117/12.2522602

2019-01-01

Abstract:We present an ambient refractive index (RI) insensitive temperature sensor based on a Silicon-on-Insulator (SOI) ellipse stack major axis modulated photonic crystal (PC) nanobeam cavity (EPCNC). The PC nanobeam cavity is covered with SU-8 cladding to increase the temperature sensitivity by taking advantage of the relatively high thermooptic (TO) coefficient of SU-8 cladding. Three dimensional finite-difference time-domain (3D-FDTD) simulations are used for our analysis. The results show that the sensitivity of temperature sensing is-108.9pm/K. In particular, the proposed sensor not only achieves a competitive temperature sensitivity, but also eliminates the influence of ambient RI on sensing. Therefore, the proposed sensor is potentially a promising platform for future application of temperature sensing.
Integrated Optical Electric Field Probe for Nanosecond Pulse Measurement

Bao Sun,Zhefeng Hu,Kaixin Chen,Fushen Chen,Yongsheng Cao

DOI: https://doi.org/10.1117/12.919531

2011-01-01

Abstract:Lithium niobate based (LiNbO3) integrated optical sensor with Mach-Zehnder optical waveguide interferometer and tapered antenna array was designed and fabricated for measuring pulsed electric field with nanosecond width. The fabricated sensor exhibits relatively flat frequency response with a variation not more than 4 dB from 10 kHz to 5 GHz and minimum detectable electric field intensity of 0.4 V/m. A 103 V/m pulsed electric field with nanosecond width was also measured by this integrated optical sensor, the experimental results exhibit the information of EMP can be detected and extracted by this integrated optical sensor.
A Nanoscale Sensor Based on a Toroidal Cavity with a Built-In Elliptical Ring Structure for Temperature Sensing Application

Feng Liu,Shubin Yan,Lifang Shen,Pengwei Liu,Lili Chen,Xiaoyu Zhang,Guang Liu,Jilai Liu,Tingsong Li,Yifeng Ren

DOI: https://doi.org/10.3390/nano12193396

IF: 5.3

2022-09-28

Nanomaterials

Abstract:In this article, a refractive index sensor based on Fano resonance, which is generated by the coupling of a metal–insulator–metal (MIM) waveguide structure and a toroidal cavity with a built-in elliptical ring (TCER) structure, is presented. The finite element method (FEM) was employed to analyze the propagation characteristics of the integral structure. The effects of refractive index and different geometric parameters of the structure on the sensing characteristics were evaluated. The maximum sensitivity was 2220 nm/RIU with a figure of merit (FOM) of 58.7, which is the best performance level that the designed structure could achieve. Moreover, due to its high sensitivity and simple structure, the refractive index sensor can be applied in the field of temperature detection, and its sensitivity is calculated to be 1.187 nm/°C.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Study of an Integrated Optical Sensor with Mono-Shielding Electrode for Intense Transient E-field Measurement

Rong Zeng,Junjie Yu,Bo Wang,Ben Niu,Yong Hua

DOI: https://doi.org/10.1016/j.measurement.2013.12.021

IF: 5.6

2014-01-01

Measurement

Abstract:Intense E-field measurement is widely applied in high voltage and dielectric insulation research. In this paper, an integrated optical E-field sensor for time-domain measurement has been studied comprehensively, which is based on Mach-Zehnder interferometer with a mono-shielding electrode. Firstly, the principle and the key issues of the sensor design are presented. Secondly, the time-domain response characteristics are studied and the sensor can well follow waveforms with a rise time from nano-second to micro-second. Thirdly, the temperature stability of the sensor is analyzed, and the influence of temperature is quantified. Finally, the measurement of gas discharge field by the developed sensor is introduced, showing that the time-domain transient field measurement is an effective criterion for streamer inception. (C) 2014 Elsevier Ltd. All rights reserved.

Large dynamic range athermal LNOI/TiO<inf>2</inf> nanobeam electric field sensor

Large dynamic range athermal LNOI/TiO<sub>2</sub> nanobeam electric field sensor

Large dynamic range athermal LNOI/TiO2 nanobeam electric field sensor

Large-dynamic-range athermal lithium niobite on insulator/ TiO<sub>2</sub> nanobeam electric field sensor

TiO2nanowire Array Based Interferometric Sensor

A Two-Dimensional LiNbO3 Photonic E-Field Sensor Using Inclined Dipole Antennas

High sensitivity thin-film lithium niobate electric field sensor

Broadband Electric Field Sensor with Large Dynamic Range and High Sensitivity Based on Lithium Niobate on Insulator

Integrated Optical Electric Field Sensor from 10 Khz to 18 GHz

Integrated High-Q Optomechanical Nanobeam Cavity for Refractive Index Sensing

Micro Optical E-field Sensor for Intense Electric Field Measurement

Integrated Optical Electric Field Sensor with Array Conical Dipole Antenna Electrodes Based on Lithium Niobate

An Integrated Optical Waveguide E-field Sensor with Segmental Electrodes

Optical Temperature Sensor Based On Zno Thin Film'S Temperature-Dependent Optical Properties

Thermo-Optical Tuning Cascaded Double Ring Sensor With Large Measurement Range

Improving Thermal Stability of LiNbO 3 Based Electro‐optical Electric Field Sensor by Depositing a TiO 2 Film

Integrated Photonic Electric Field Sensor Operating More Than 26 GHz

Refractive Index Insensitive Temperature Sensor Based On A Photonic Crystal Nanobeam Cavity

Integrated Optical Electric Field Probe for Nanosecond Pulse Measurement

A Nanoscale Sensor Based on a Toroidal Cavity with a Built-In Elliptical Ring Structure for Temperature Sensing Application

Study of an Integrated Optical Sensor with Mono-Shielding Electrode for Intense Transient E-field Measurement