Abstract:This paper proposes a bulk micromachined bandpass filter on 0.5mm-thick Pyrex glass, whose operation is based on the splitting of the odd and even degenerate mode in a dual-mode resonator, with the addition of a perturbation element. In such a way, a filter may require only half resonators of a traditional one, resulting in a more compact configuration over those ever reported. A 4%-bandwidth bandpass filter centered at 17GHz was designed. The square-ring-like coplanar waveguide (CPW) act as a dual-mode resonator, and an open-circuited stub attached to the inner corner of the square-ring acts as the perturbation element and dominates the filter bandwidth. The two bulk-micromachined switches for tuning are placed symmetrically along the diagonal line. Since the electrical length of CPW is extended after being loaded by capacitive switches, both the degenerate resonating frequencies and the filter mid-band frequency are shifted downward. Theoretical formulas are derived for various actuation states of all the switches. The filter performance is analysed also using finite-element fullwave tools. A frequency shift of 0.6GHz is seen which is close to 0.58GHz obtained from analytical solutions. Both the original and tuned state come with satisfying microwave performance, i.e. low passband insertion-loss (< 0.5dB) and return-loss (< −15dB) and high stopband rejection. It is also shown that the simulated result is in good agreement with theoretical solutions. The bulk microfabrication is shown to be much simpler than surface micromachining conventionally used for RF MEMS switches. Since the bridge skeleton is Si, thermal mismatch between all-metal bridge and dielectric substrate is avoided, and reliability at elevated temperature is guaranteed or at least greatly improved. Besides, the p++ doped Si line patterned simultaneously with the microbridges, can also be used as a DC biasing resistor, which can eliminate the additional steps to fabricate the resistive alloy line. The tested results of the fabricated switch samples are also shown. The device may be a good candidate for novel Ku-band inter-scientific satellite communication or wireless networking.

Wideband Mm-Wave Differential Bandpass Filter Using Micromachined Rectangular Coaxial Lines

Q-band balanced bandpass filter based on rectangular micro-coaxial transmission line with improved common-mode suppression

Design of a Miniaturized Dual-Band Double-Folded Substrate Integrated Waveguide Bandpass Filter with Controllable Bandwidths

Ultra‐wideband Bandpass Filter Using Half‐mode T‐septum Substrate Integrated Waveguide with Electromagnetic Bandgap Structures

Narrowband HMSIW-SSPP Hybrid Bandpass Filter Operating at Millimeter-wave Band

Compact 13–34 GHz ultrawideband on‐chip bandpass filter using the coupled meandered line

On-Chip Impedance-Optimized Microstrip Transmission Line For Multi-Band And Ultra-Wide-Band Microwave Applications

Miniaturized Circular Substrate Integrated Waveguide Bandpass Filter With Flexible Mixed Coupling and Wide Stopband Rejection

Design of Superconducting Ultra-Wideband Filter with Wide Stopband Based on Quintuple-Mode Resonator

Two-Layer-Magic-T-Based Bandpass, Quasi-Bandstop, and Dual-Passband Balanced Filters With Differential-/Common-Mode Reflectionless Behavior

Multilayer circular SIW cavity differential bandpass filter with wide‐stopband characteristics

Compact and Wide-Stopband Bandpass Filter Using Hybrid Shielded EMCSIW and CSRR Resonators with a Mixed Electromagnetic Coupling Scheme

Compact Dual-Band Dual-Mode SIW Balanced BPF With Intrinsic Common-Mode Suppression

Wideband bandpass filter with ultra-wide stopband based on cross-shaped parallel coupled lines

Analysis and design of a wide stop‐band and high out‐of‐band suppression BPF

A Bulk Micromachined Tunable Dual-Mode Microwave Bandpass Filter on Coplanar Waveguide

Design of a Superconducting Ultra-Wideband (UWB) Bandpass Filter with Sharp Rejection Skirts and Miniaturized Size

Design of a Low-Band Wideband Superconducting Filter Using Triple-Mode Resonator

High selectivity and common-mode suppression balanced bandpass filter with TM dual-mode SIW cavity

UWB Bandpass Filter with Dual Notched Bands Using T-Shaped Resonator and L-Shaped Defected Microstrip Structure

Design of Miniaturized Substrate Integrated Coaxial Line Bandpass Filters with Quarter-Wavelength Spiral Resonator