Abstract:Potential applications at elevated temperatures require shape memory alloys (SMAs) to possess high transformation temperature, excellent shape recovery ability and thermal/functional stability. The present study investigated the influences of Dy addition on the microstructural characterization, functional behavior and possible deformation mechanisms in high temperature Ni54Mn25Ga21 SMAs. The results indicated that adequate Dy addition contributed to a desirable tradeoff among compressive strength, ductility and functional performance. Ni54Mn25Ga20.9Dy0.1 alloy showed the highest shape memory recoverable strain due to the improvement of mechanical properties and formation of small Dy-rich precipitates. Simultaneously, an obvious pseudoelasticity was observed over a wide temperature range with a maximum recoverable strain of 3.74% at 320°C in this alloy. All the Dy-containing alloys exhibited high thermal cyclic stability and quite low thermal hysteresis. However, it was revealed that a complicated and abnormal relationship between thermal hysteresis and the middle eigenvalue λ2 existed for the investigated alloys with a lattice transition from cubic to tetragonal. Calculated results based on energy minimization theory revealed that both the transformation strain and critical stress for inducing martensitic transformation varied with crystallographic orientations. The detwinning of pre-existing (112) compound twins and formation of (112) deformation twins were the dominant deformation mechanisms of martensite, which were highly compatible with the macroscopical recoverable strain. The present study provided valuable insights for developing high-performance multifunctional shape memory alloys for high temperature applications.

Thermal Stability of Ag-doped Ni-Mn-Ga High-Temperature Shape Memory Alloy

Thermal stability of Ni 54 Mn 25 Ga 20.9 Gd 0.1 high-temperature shape memory alloy with large reversible strain

Improvement of Mechanical Properties and Elastocaloric Effect in Ag Doped Ni-Mn-In Magnetic Shape Memory Alloys

Martensitic transformations of Ni54Mn25Ga 21-xAlx shape memory alloys

Martensitic Transformations of Ni<sub>54</sub>Mn<sub>25</sub>Ga<sub>21-x</sub>Al<sub>x</sub> Shape Memory Alloys

Effect of Ni substitution for Ga on the polycrystalline Ni-Mn-Ga-Gd high-temperature shape memory alloys

Microstructure and transformation behavior of Ni54Mn 25Ga15Al6 high-temperature shape memory alloy

Martensite Stabilization and Thermal Cycling Stability of Two-Phase NiMnGa-based High-Temperature Shape Memory Alloys

Study of Ni50+xMn25Ga25−x (x = 2–11) As High-Temperature Shape-Memory Alloys

Microstructure, Mechanical and Shape Memory Properties of Polycrystalline Ni–Mn–Ga High Temperature Shape Memory Alloys

Thermal stability of dual-phase Ni58Mn25Ga17 high-temperature shape memory alloy

Microstructure and High-Temperature Shape-Memory Effect in Ni54mn25ga21 Alloy

The Effect of Aging on the Ni–Mn–Ga High-Temperature Shape Memory Alloys

Mechanical and Shape Memory Properties of Ni54mn25ga21 High-Temperature Shape Memory Alloy

Microstructure and Martensitic Transformation Behavior of a Constant-Strain Aged Ni–Mn–Ga–Ti Magnetic Shape Memory Alloy

Microstructure and Martensitic Transformation of Ni–Mn–Ga–Ti Ferromagnetic Shape Memory Alloys

Martensitic Transformation of Ni–Fe–Ga Magnetic Shape Memory Alloys

Microstructural Characterization, Functional Behavior and Deformation Mechanism of Ni&gt;sub&gt;54Mn <sub>25</sub>Ga <sub>21-x</sub>Dy <sub>x</sub> High Temperature Shape Memory Alloys with Low Thermal Hysteresis

Stress-induced Crystallographic and Microstructural Evolution for Hierarchically Twinned Martensite in Single- and Dual-Phase Ni-Mn-Ga Alloys

The Mechanism Clarification of Ni–Mn–Fe–Ga Alloys with Excellent and Stable Functional Properties

Site Preference and Alloying Effect of Excess Ni in Ni-Mn-Ga Shape Memory Alloys