Abstract:To protect power systems from severe short circuit faults, the zero-current switching (ZCS) technique is widely accepted due to its fast interruption speed. However, the traditional ZCS technique is more complicated in bidirectional switching, which limits its wide application, especially in AC power systems. Therefore, a novel auto-oriented bidirectional ZCS hybrid circuit breaker is proposed to simplify the overall topology of the circuit breaker. The design of the ZCS hybrid circuit breaker is based on the idea of diverting the pulse current toward the reverse direction of the fault current by the arcing voltage itself. The proposed scheme can interrupt bidirectional faults with just one ZCS circuit, without detecting fault current direction. Firstly in the paper, the topology and operating principles of the proposed bidirectional ZCS hybrid circuit breaker are introduced. Moreover, the key parameters are optimized to make the hybrid circuit breaker capable of bidirectional interruption automatically. Furthermore, dielectric recovery characteristics of the vacuum interrupter under special conditions are also measured to determine the design parameters. The proposed topology of the bidirectional ZCS hybrid circuit breaker is validated using a 450VAC/630A prototype. Short circuit breaking tests of the prototype are conducted without detecting fault current direction in advance. Experimental results show that the breaking time of the prototype is less than 1 ms in clearing either direction of fault current with a prospective value of 20 kA and $\text{d}i/\text{d}t$ of 8 A/ $\mu \text{s}$ . The feasibility of the proposed scheme is verified with these test results.

Enhanced Model-Based Design and Optimization Method for Coupled Z-Source Circuit Breakers

Electrical Performance Design for Circuit Breakers Based on Multi-domain Sequential Coupling

An Integrated Design of the Z-Source Circuit Breaker and the Cuk Converter

A Novel Bidirectional Z-Source Solid-State Circuit Breaker for DC Microgrid

Research and Design of DC Microgrid Z-source Solid-State Circuit Breaker

Design and Simulation of a Bidirectional DC Circuit Breaker

Optimization Of Current Breaker And Fault Current Limiter In Dc Micro-Grid Based On Faulty Transient Analysis

A Coupled-Inductor-Based Bidirectional Circuit Breaker for DC Microgrid

Multiphysics-Coupled Modeling: Simulation of the Hydraulic-Operating Mechanism for A Sf6 High-Voltage Circuit Breaker

A Novel Solid-State Circuit Breaker for DC Microgrid System

A Novel Bidirectional Solid-State Circuit Breaker for DC Microgrid

A Novel Solid-State Circuit Breaker for On-Board DC Microgrid System

Development of Intelligent Design and Simulation Platform for Medium Voltage Circuit Breakers

Research on Topological Structure and Simulation of Hybrid DC Circuit Breaker

Optimization Design of Interruption Characteristics of LVDC Hybrid Circuit Breaker

DYNAMIC SIMULATION AND OPTIMUM DESIGN OF LOW-VOLTAGE CIRICUIT BREAKER

Design and Implementation of an Auto-Oriented Bidirectional ZCS Hybrid Circuit Breaker

Design and Validation of efficient Z source breaker with voltage stress reduction for DC Microgrid

Control strategy and experimental verification of hybrid DC circuit breaker

Parameter Designing of the DC Hybrid Circuit Breaker

A Boost Converter Integrated with DC Circuit Breaker