Abstract:The fibre-optic Bragg grating (FBG) sensor is broadly accepted as a structural health monitoring device for fibre reinforced plastic (FRP) materials by either embedding into or bonding onto the structures. The accuracy of the strain measured by using the FBG sensor is highly dependent on the bonding characteristics among the bare optical fibre, protective coating, adhesive layer and host material. In general, the signal extracted from the embedded FBG sensor should reflect the straining condition of the host structure. However, due to the existence of an adhesive layer and protective coating, part of the energy would convert into shear deformation. Therefore, the mechanical properties of these materials would affect the resultant strain measured by embedding a FBG sensor into the structure. This paper presents a theoretical model to evaluate the differential strains between the bare fibre and host material with different adhesive thickness and modulus of the protective coating of the embedded FBG sensor. The results are then compared with numerical analysis by using the finite element method (FEM). Experimental work was conducted for both glass fibre composites and FRP strengthened concrete beams with embedded FBG sensors. Externally bonded strain gauges were used to compare the results obtained from the FBG sensors. The theoretical predictions reveal that the axial strain measured at the fibre-core region is lower than the true strain of the host material with increasing thickness of adhesive layer. A thick adhesive layer and low modulus of coating material would enlarge the shear stress concentration area at the bonded end region. An experimental investigation also shows that the FBG sensor can be confidently used with sufficient bond length.

Integrated Structural Monitoring of Cantilever Rectangular Thin Plate Based on Photogrammetry and Fiber Bragg Gratings

Integrated Structural Monitoring Method of Photogrammetry and Fiber Bragg Grating Sensors with Two Cases Study

FBG sensor based dynamic monitoring and analysis on sliding construction of a Prestressed Reticulated Shell-String structure

Integrated Structural Monitoring of a Crawler Crane Based on Photogrammetry and Fiber Bragg Gratings

Real-time strain monitoring and control of urban bridge cluster monitoring system with FBG sensor

Study on the Structural Deformation Monitoring Based on Distributed FBG Sensing Techniques

Research On Reinforced Concrete Structural Strain Monitoring By Fiber Bragg Grating

A HEALTH MONITORING STRATEGY FOR RC FLEXURAL STRUCTURES BASED ON DISTRIBUTED LONG-GAGE FIBER OPTIC SENSORS

Study of deflection and strain distribution sensing of a simply supported rectangular plate based on fiber Bragg grating sensors

Strain monitoring in FRP laminates and concrete beams using FBG sensors

Deformation Monitoring for Chinese Traditional Timber Buildings Using Fiber Bragg Grating Sensors

The Structural Performance of CFRP Composite Plates Assembled with Fiber Bragg Grating Sensors

Computer-aided feature recognition of CFRP plates based on real-time strain fields reflected from FBG measured signals

Real time evaluation of load of smart CFRP reinforced steel concrete beam

Dynamic Response of CFRP Reinforced Steel Beams Subjected to Impact Action Based on FBG Sensing Technology

Monitoring of FRP Strengthened Structures Using a Modified Time of Flight Interferometer

Enhanced FBG sensor-based system performance assessment for monitoring strain along a prestressed CFRP rod in structural monitoring

Discontinuous Deformation Monitoring of Smart Aerospace Structures Based on Hybrid Reconstruction Strategy and Fiber Bragg Grating

Study of a Long-Gauge FBG Strain Sensor with Enhanced Sensitivity and Its Application in Structural Monitoring

Research on the monitoring of cracks in concrete structures based on fiber Bragg grating sensors

Carbon Cantilever Beam Health Inspection Using a Polymer Fiber Bragg Grating Array