Abstract:Distributed fiber-optic sensing (DFOS) technologies have been used for decades to detect damage in infrastructure. One recent DFOS technology, Optical Frequency Domain Reflectometry (OFDR), has attracted attention from the structural engineering community because its high spatial resolution and refined accuracy could enable new monitoring possibilities and new insight regarding the behavior of reinforced concrete (RC) structures. The current research project explores the ability and potential of OFDR to measure distributed strain in RC structures through laboratory tests on an innovative beam–column connection, in which a partial slot joint was introduced between the beam and the column to control damage. In the test specimen, fiber-optic cables were embedded in both the steel reinforcement and concrete. The specimen was tested under quasi-static cyclic loading with increasing displacement demand at the structural laboratory of the Pacific Earthquake Engineering Research (PEER) Center of UC Berkeley. Different types of fiber-optic cables were embedded both in the concrete and the rebar. The influence of the cable coating and cable position are discussed. The DFOS results are compared with traditional measurements (DIC and LVDT). The high resolution of DFOS at small deformations provides new insights regarding the mechanical behavior of the slotted RC beam–column connection, including direct measurement of beam curvature, rebar deformation, and slot opening and closing. A major contribution of this work is the quantification of the performance and limitations of the DFOS system under large cyclic strains. Performance is quantified in terms of non-valid points (which occur in large strains when the DFOS analyzer does not return a strain value), maximum strain that can be reliably measured, crack width that causes cable rupture, and the effect of the cable coating on the measurements. Structural damage indices are also proposed based on the DFOS results. These damage indices correlate reasonably well with the maximum sustained drift, indicating the potential of using DFOS for RC structural damage assessment. The experimental data set is made publicly available.

Monitoring of FRP Strengthened Structures Using a Modified Time of Flight Interferometer

FBG sensor based dynamic monitoring and analysis on sliding construction of a Prestressed Reticulated Shell-String structure

A Novel Method of Embedding Distributed Optical Fiber Sensors for Structural Health Monitoring

Oscillator interrogated time-of-flight optical fiber interferometer for global strain measurements

Global and Local Fiber Optic Sensors for Health Monitoring of Civil Engineering Infrastructure Retrofit with FRP Materials

An Optical Fiber Sensor Method for Simultaneously Monitoring Corrosion and Structural Strain Induced by Loading

Self-Monitoring Fiber Reinforced Polymer Strengthening System for Civil Engineering Infrastructures

Distributed Fiber Optics Sensing Applied to Laminated Composites: Embedding Process, Strain Field Monitoring with OBR and Fracture Mechanisms

Embedded Distributed Optical Fiber Sensors in Reinforced Concrete Structures—A Case Study

Fiber Optic Sensing Textile for Strain Monitoring in Composite Substrates

Real-time self-monitoring and smart bend recognizing of fiber-reinforced polymer composites enabled by embedded magnetic fibers

Distributed Fiber-Optic Strain Sensing of an Innovative Reinforced Concrete Beam–Column Connection

Distributed Long-Gauge Optical Fiber Sensors Based Self-Sensing FRP Bar for Concrete Structure

STRUCTURAL HEALTH MONITORING BASED ON LONG-DISTANCE EMBEDDED OPTICAL FIBER SENSOR

Intelligent FRP Retrofits for Critical Civil Infrastructures

Interfacial debonding detection of strengthened steel structures by using smart CFRP-FBG composites

Theoretical and Experimental Studies of Structural Health Monitoring of Carbon Composites with Integrated Optical Fiber Sensors Based on Fiber Bragg Gratings

Strain measurement of CFRP-Steel bonded joints using distributed optical fibre sensors

Fiber Optic Sensor Embedment Study for Multi-Parameter Strain Sensing

Application of Optical-Fiber Sensing to Concrete Support and Continuous Wall Strain Monitoring

Damage characterization of FRP embedded with different optical fibers under tensile load using acoustic emission and micrographic real-time inspection