Properties of seven-filament Cu/Ag-sheathed (Ba,K)Fe2As2 tapes fabricated from round and square wires
Zhen-Kun Jin,Cong Liu,Chao Yao,Liu Li,He Huang,Dong-Liang Wang,Chi-Heng Dong,Kai Wang,Xian-Ping Zhang,Satoshi Awaji,Yan-Wei Ma
DOI: https://doi.org/10.1007/s12598-021-01734-z
IF: 6.318
2021-05-10
Rare Metals
Abstract:Iron-based superconductor, a promising candidate for high-field applications, has attracted significant attentions. For practical utilization, the superconducting tapes should have high transport critical current density (Jc), low production cost, larger mechanical strength and good homogeneity. In this study, seven-filament Cu/Ag-sheathed (Ba,K)Fe2As2 tapes were fabricated from round and square wires. It is found that the tapes rolled from square wires have a desirable uniformity of filament deformation and distribution, compared with the ones rolled from round wires. Moreover, the Jc of tape was obviously improved by using square drawing dies instead of traditional round ones. For the tapes rolled from square wires annealed under ambient and 2 MPa by hot pressing, the transport Jc values reached 1.51 × 104 A·cm−2 and 4.86 × 104 A·cm−2 (4.2 K, 10 T), respectively. The deformation process on the cross section of the tapes during rolling was analyzed by using the powder-flow model. These results indicate a potential application of Cu/Ag (Ba,K)Fe2As2 tapes in high-magnetic-field region.Graphical abstract
materials science, multidisciplinary,metallurgy & metallurgical engineering