Abstract:This study proposes a clustered dynamic adaptive chemistry (CDAC) method, which uses an iterative K-means algorithm to partition the computational cells into different groups according to their similarity in terms of the temperature and significant species compositions. Taking advantage of the clustered cells, the averaged thermo-chemical properties of the cells in the respective clusters are then used to identify the adaptive dynamic reduced chemistry through the method of direct relation graph with error propagation (DRGEP). Moreover, the integration of the chemical source term, which commonly dominates the computational effort in reactive flow simulations, is now performed using the dynamic adaptive reduced chemistry at the cluster level instead of the cell level. With this CDAC method, the on-the-fly DRGEP process as well as the chemistry integration only needs to be conducted at the cluster level, dramatically reducing the unnecessary repeated computation for similar computational cells. In addition, the adaptive dynamic reduced chemistry further accelerates the chemistry integration process due to less ordinary differential equations (ODEs) to be solved for each cluster. This newly proposed CDAC method was tested in multi-dimensional homogeneous charged compression ignition engine (HCCI), direct injection compression ignition (DICI) engine and constant volume chamber combustion (CVCC) fueled with diesel, biodiesel and kerosene through the use of their respective surrogate fuel mechanisms under different operating conditions. The performance of CDAC in terms of accuracy and efficiency were extensively analyzed and discussed using different user-defined parameters, mechanisms with different surrogate components and number of species as well as different meshes with different number of grid cells. Based on this analysis, the error tolerances in DRGEP and the error tolerances of the temperature and significant species' mass fraction are recommended as: epsilon(d) <= 0.001, epsilon(T) 20K and epsilon(Y) <= 0.01 to achieve less than 0.1% integral error. With these recommended user-defined tolerances, it can be observed that the current CDAC method is able to accurately predict the in-cylinder pressure as well as the species profile in HCCI, DICI and the flame lift-off length in CVCC when compared with the full chemistry calculations as well as the experimental results. Moreover, with the recommended user defined error tolerances and a chemical kinetic model of 112 species, this CDAC method is capable of achieving a computational time speed-up factor of more than 3 compared to the conventional DAC and of almost 5 compared to the full chemistry. Finally, the CDAC method coupled CFD was applied to simulate a diesel DICI engine under three different engine speeds with a detailed primary reference fuel (PRF) mechanism of more than 1000 species. The 3-D simulation could be finished in acceptable CPU time while being able to well capture the experimental in-cylinder pressure and heat release rate for all the three engine speeds. (C) 2018 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

Development and evaluation of a manifold projection trajectory-based method for combustion mechanism reduction of fuel

An Improved Manifold-Projection Trajectory Based Method for Chemical Kinetic Mechanism Reduction

Development and Verification of Simplified Methane/dimethyl Ether Mechanism for Micro-Combustion

Comparative Analysis of Detailed and Reduced Kinetic Models for CH4 + H2 Combustion

Development of efficient and accurate skeletal mechanisms for hydrocarbon fuels and kerosene surrogate

Skeletal Kinetic Mechanism Generation and Uncertainty Analysis for Combustion of Iso-octane at High Temperatures

Computational Acceleration of Multi-Dimensional Reactive Flow Modelling Using Diesel/biodiesel/jet-Fuel Surrogate Mechanisms Via a Clustered Dynamic Adaptive Chemistry Method

Decoupling Methodology: an Effective Way for the Development of Reduced and Skeletal Mechanisms

Dynamic Adaptive Chemistry with Mechanisms Tabulation and in Situ Adaptive Tabulation (ISAT) for Computationally Efficient Modeling of Turbulent Combustion

Developing a New Skeletal Mechanism for Propane, Butane, and LPG Fuels

Comparison of Kinetic Mechanisms for Numerical Simulation of Methanol Combustion in DICI Heavy-Duty Engine

Skeletal Kinetic Modeling for the Combustion of Endothermic Hydrocarbon Fuel in Hypersonic Vehicle

Skeletal Kinetic Model Generation for the Combustion of C 1 -C 2 Fuels

Development of a Skeletal Mechanism for Heavy-Duty Engines Fuelled by Diesel and Natural Gas

Construction of reduced chemical mechanisms orientated toward specific applications: a case study of primary reference fuel

Application of the Optimized Decoupling Methodology for the Construction of a Skeletal Primary Reference Fuel Mechanism Focusing on Engine-Relevant Conditions

Evaluation, Reduction, and Validation of a New Simplified Mechanism for Propane Combustion in Both Air and Oxy-Fuel Conditions

Construction of a Skeletal Multi-Component Diesel Surrogate Model by Integrating Chemical Lumping and Genetic Algorithm

Development of a Skeletal Mechanism for Tri-Component Diesel Surrogate Fuel: N-hexadecane/iso-cetane/1-methylnaphthalene

Mechanism reduction for multicomponent surrogates: A case study using toluene reference fuels

Efficient Approach for the Optimization of Skeletal Chemical Mechanisms with Multiobjective Genetic Algorithm