Abstract:Ti65 alloy (Ti-5.8Al-4.0Sn-3.5Zr-0.5Mo-0.4Si-0.3Nb-1.0Ta-0.8W-0.05C) is the newly developed high temperature titanium alloy optimized from Ti60 alloys. The long-term service temperature of the alloy is as high as 650 °C, which is unattainable with the previous high temperature titanium alloy. It has excellent strength and excellent creep resistance, and has great application prospects in the aerospace industry. In the current study, the evolution of microstructure and texture of Ti65 alloy sheets developed by unidirectional rolling (UDR) and cross rolling (CR) followed by solution and aging treatment was investigated. The microstructure of the UDR sample consists of equiaxed α p , lamellar α s and few elongated α p , and the texture is the combination of minor B-type and major T-type texture, with the main component of basal {0001} fiber texture and { 01 1 ̄ 0 } , respectively. Due to more active slip system resulted by transformed direction, the microstructure of the CR sample consists of more elongated α p , and the { 01 1 ̄ 0 } texture characterized as R-type texture forms in addition to B/T-type texture. With aging temperature increasing, the microstructures for both transform to duplex microstructure, and the thicknesses of lamellar α s increase. B-type texture becomes stronger, while T/R-type texture are weakened, which is caused by the combination of recrystallization, spheroidization, and variant selection. An abnormal increasing of T/R-type texture but constant B-type texture happens in the CR-600 sample, which is related to high recrystallization fraction. It is expected that the research results can provide useful references for the rolling of high temperature titanium alloy sheets and the precise control of microstructure/texture.

Research on the Recrystallization Process of the Ti-70 Titanium Alloy Sheet

Static Recrystallization Behavior and Texture Evolution during Annealing in a Cold Rolling Beta Titanium Alloy Sheet

Microstructure Recrystallization and Mechanical Properties of a Cold-Rolled TiNbZrTaHf Refractory High-Entropy Alloy

Study on Recrystallization Behavior of Ti45Nb Titanium Alloy

The Influences of Process Annealing Temperature on Microstructure and Mechanical Properties of Near Β High Strength Titanium Alloy Sheet.

Effect of Annealing on the Microstructure, Texture, and Properties of Cold-Rolled Ti50Ni47Fe3 Shape Memory Alloy Sheets

Microstructures and mechanical properties of hot-pack rolled Ti-43Al-9V-Y alloy sheet

Effect of Rolling and Heat Treatment on Microstructure and Properties of Ti-26 Sheet

Effect of Thermal Annealing on the Microstructure, Mechanical Properties and Residual Stress Relaxation of Pure Titanium after Deep Rolling Treatment

Microstructure Evolution and Mechanical Properties of a Hot-Rolled Ti Alloy

Microstructure evolution and recrystallization of Ti6246 alloy in hot‐rolling and annealing processes

Dynamic Recrystallization of the Constituent Γ Phase and Mechanical Properties of Ti-43Al-9V-0.2Y Alloy Sheet

Microstructure and Texture Variations in High Temperature Titanium Alloy Ti65 Sheets with Different Rolling Modes and Heat Treatments

Microstructure, Texture and Mechanical Properties of Ti-43Al-9V-0.2Y Alloy Hot-Rolled at Various Temperatures

Microstructure Evolution and Mechanical Properties of Pure Ti Alloy Sheet Fabricated by Double-Side Corrugated Rolling

Investigation on the recrystallization and mechanical properties of a novel TZM alloy with heat treatment

Microstructure and Mechanical Properties of Ti62421S High Temperature Titanium Alloy with Different Heat Treatments

High strength and toughness of Ti–6Al–4V sheets via cryorolling and short-period annealing

Effect of Hot Rolling and Heat Treatment on Microstructure and Tensile Properties of High Strength Beta Titanium Alloy Sheets

Precipitation behavior and strengthening-toughening mechanism of hot rolled sheet of Ti65 titanium alloy during aging process

The Effect of Annealing Treatment on the Microstructure and Texture of a Cold-Rolled TiNiFe Shape Memory Alloy Tube