Abstract:Magnetic nanoparticles and thin films exhibiting a large magnetic anisotropy energy density (MAE) have attracted enormous attention over the last years due to their potential use in magnetic data storage or sensing applications. FePt alloy nanoparticles and films have a huge MAE in the chemically ordered L10 phase. This ordered phase is typically obtained by annealing the as-prepared chemically disordered fcc FePt nanoparticles at temperatures above 600°C. Besides standard colloidal approaches [1], such fcc FePt nanoparticles can be fabricated by a micellar technique resulting in regular arrays on various substrates [2,3]. This approach offers the advantage that the interparticle distance can be tuned between 20-100 nm. Due to the larger separation particle agglomeration can be avoided during the annealing induced transformation into the L10 phase. Moreover, the particles are magnetostatically decoupled. We investigated the formation of the L10 phase for 2-10 nm FePt particles as a function of the annealing temperature and time on Si/SiOx substrates. Hysteresis loops at T = 15K reveal strongly enhanced coercive field after an annealing step at 700°C for 30 min compared to the as-prepared particles. The effective MAE is found to be 1-2×10 J/m using simple Stoner-Wohlfarth modeling that is a factor of 3-5 smaller than the FePt bulk MAE. In order to correlate the magnetic properties to the structure of the particles we performed transmission electron microscopy (TEM) investigations of FePt particles on both, Si/SiOx and MgO(001) substrates. Basically, the lowered MAE could originate from defective crystal structures, imperfect ordering of Feand Pt-planes (chemical ordering parameter), and/or inhomogeneous segregation of Fe/Pt within the particles. The applied TEM methods included conventional TEM (bright-field, dark-field, electron diffraction), spherical aberration corrected high resolution imaging and scanning TEM (Z-contrast). It was found that most particles contain defects such as stacking faults and multiple twins (Figure 1). Calculated TEM images based on various models of FePt nanoparticles (Figure 2) were generated and compared to experimental images especially to analyze and to determine the chemical ordering parameter of the L10 phase, crystal structure and defects.

Low Gilbert damping and high thermal stability of Ru-seeded L1 0 -phase FePd perpendicular magnetic thin films at elevated temperatures

Low Gilbert damping and high perpendicular magnetic anisotropy in an Ir-coupled L10-FePd-based synthetic antiferromagnet

Low-temperature Deposition of L10 FePt Films for Ultra-High Density Magnetic Recording

Sputtered L10‐FePd and its Synthetic Antiferromagnet on Si/SiO2 Wafers for Scalable Spintronics

Interfacial Effect on the Ferromagnetic Damping of CoFeB Thin Films with Different Under-Layers

Low Temperature Ordering of FePt Films by In-Situ Heating Deposition Plus Post Deposition Annealing

Colossal Gilbert Damping Anisotropy in Heusler‐Alloy Thin Films

Prediction of new stable phases of FePd2 crystal alloy

Spin-Orbit Interaction Tuning Of Perpendicular Magnetic Anisotropy In L1(0) Fepdpt Films

Chemical order and crystallographic texture of FePd:Cu thin alloy films

Highly Tunable Perpendicular Magnetic Anisotropy and Anisotropic Magnetoresistance in Ru-doped La0.67Sr0.33MnO3 Epitaxial Films

Transition from ferromagnetic to noncollinear to paramagnetic state with increasing Ru concentration in FeRu films

Highly Efficient Spin-Orbit Torque in a Perpendicular Synthetic Ferrimagnet

Oscillation of interlayer coupling in epitaxial FePd|Ir|FePd(001) perpendicular synthetic antiferromagnet

Structural and Magnetic Investigations on FePt Nanoparticles

Magnetic properties of thin epitaxial Pd$_{1-x}$Fe$_x$ alloy films

Tuning magnetic anisotropy in SrRuO3 thin film by Ru vacancies induced phase transition

Exploration of new phase structure of FePd crystalline alloy with a stoichiometric of 1:1

Hole-doping-induced half-metallic ferromagnetism in highly-air-stable PdSe2 monolayer under uniaxial stress

L 10 FePd-based perpendicular magnetic tunnel junctions with 65% tunnel magnetoresistance and ultralow switching current density

Pinning Effect And Thermal Stability Study In L1(0) Fept-Pinned Spin Valves