Abstract:Although Toyoura sand has been widely used as a standard material for physical model tests (particularly centrifuge model tests), its path-dependent stiffness degradation curves are rarely reported in the literature. This leads to difficulties in back-analyzing and understanding the physical tests involving significant changes in the direction of stress paths (such as unloading problems). In this study, path-dependent stiffness degradation curves of medium-dense Toyoura sand were determined by carrying out a series of stress-path triaxial tests, with local strain measurements. In the triaxial tests, four typical recent stress histories (changes of path direction = 0, 90, -90, and 180 degrees) were simulated. The measured small strain stiffnesses of Toyoura sand were then used to calibrate an advanced hypoplastic model that accounts for path-dependent soil stiffness at small strains. To justify the validity of the calibrated hypoplastic model and model parameters, a Type A numerical prediction and a centrifuge model test were carried out to simulate a typical unloading problem (i.e., excavation) in medium-dense Toyoura sand. Triaxial test results show that a 180 degrees reversal in the direction of the stress path increased the initial secant modulus of Toyoura sand by eight times. The path dependency of soil stiffness, however, vanished when the deviatoric strain exceeded 0.3%. The ground deformations (resulting from excavation) predicted by the numerical analysis show reasonable agreement with the measured data from the centrifuge test. This suggests the potential applicability of the calibrated soil model and its model parameters in predicting or back-analyzing other physical model tests in Toyoura sand.

Stress–dilatancy behavior for sand under loading and unloading conditions

Failure Mechanisms of Sand under Asymmetrical Cyclic Loading Conditions: Experimental Observation and Constitutive Modelling

Hypoplastic Modeling of Anisotropic Sand Behavior Accounting for Rotation of Principal Stress Direction

Energy-based Assessment of Cyclic Liquefaction Behavior of Clean and Silty Sand under Sustained Initial Stress Conditions

Impact of Static Preshearing on Undrained Anisotropy and Shear Characteristics of Sand

Energy-Based Approach to Quantify Cyclic Resistance and Pore Pressure Generation in Anisotropically Consolidated Sand

Incremental behavior of granular soils: a strain response envelope perspective

Stress Dilatancy of Natural Soft Clay under an Undrained Creep Condition

Stress–dilatancy behavior of dense marine calcareous sand under high-cycle loading: An experimental investigation

Modeling Stress–Dilatancy Behavior of Compacted Silty Sand Under Suction-Controlled Axisymmetric Shearing

Stress-dilatancy behavior of marine coral sand incorporating non-plastic fines

Effect Of Non-Coaxiality On Dilatancy Of Sand Involving Principal Stress Axes Rotation

Undrained shear behavior of silty sand with a constant state parameter considering initial stress anisotropy effect

Small Strain Path-Dependent Stiffness of Toyoura Sand: Laboratory Measurement and Numerical Implementation

Experimental Research On Behaviors Of Saturated Loose Sand Subjected To Oblique Ellipse Stress Path

Compression-dilatancy coupling effect and asymptotic state criterion of sand

Micro‐mechanism of stress‐dilatancy anisotropy in granular materials: Affine and nonaffine deformation

A simple stress-dilatancy equation for sand

Experimental Study on Asymptotic Behaviour of Anisotropic Sand

Experimental Investigation of Asymptotic State for Anisotropic Sand

Stress-dilatancy Behaviour of Bubbled Fine-Grained Sediments