Abstract:Poly(3,4-ethylenedioxythiophene): poly (styrenesulfonic acid) (PEDOT: PSS) is one of the most successful conductive polymers, usually used as hole injecting layer in organic light-emitting devices. Due to low conductivity and unsatisfied work function (WF), the modification of PEDOT:PSS with some additives has been proved to be cost-effective. Perfluorinated ionomer (PFI) has been reported as an effective additive to improve the WF of PEDOT:PSS, increasing from 5.2 eV to 5.95 eV with a recipe of PEDOT(1):PSS(6):PFI(25). However, the strong hydrophobicity of PFI has limited the choice of the organic solvents used to fabricate the uniform emitting layer on the modified PEDOT:PSS. To address this issue, the polymers were introduced as the additive of the emitter to overcome the non-uniform morphology on the hydrophobic surface of PEDOT:PSS:PFI. A conventional fluorescent polymer poly(9-vinylcarbazole) (PVK) and a thermally activated delayed fluorescent polymer (4-(2-(9-(heptadecan-9-yl)-6-phenyl-9H-carbazol-3-yl)-9,9-dihexyl-7-phenylacridin-10(9H)-yl)phenyl) (phenyl)methanone (PABPC2.5) were compared in parallel to reveal the influence of the polymer additive of the emitters on the overall performances of the devices. The control devices based on the PFI-modified PEDOT:PSS achieved a maximum current efficiency (CE) of 0.14 cd A-1, without any polymer additives in the emitting layer. In contrast, the CE of the devices with PVK and PABPC2.5 were dramatically elevated to 7.1 cdA-1 and 4.5 cd A-1 respectively, when a small molecular thermally activated delayed fluorescence was employed as the emitter. Enabled by a easily soluble phosphorescent emitter acetylacetonatobis(4-(4-tert-butylphenyl)-thieno[3,2-c]pyridinato-C2,N)iridium (PO-01-TB). The device with PABPC2.5 as the additive obtained a maximum CE of 42.0 cd A-1, which is significantly higher than 15.7 cd A-1 of the one with the additive PVK, attributed to the energy transfer in the emitting layer. The polymer additives not only overcome the issue of the hydrophobicity of the modified PEDOT:PSS but endow the exciton harvesting from the polymer to the small molecular emitters.

Diluted PEDOT:PSS for High-Performance Organic Light-Emitting Devices with Thermally Activated Delayed Fluorescence Emitters.

Feasible Modification of PEDOT:PSS by Poly(4-styrenesulfonic Acid): a Universal Method to Double the Efficiencies for Solution-Processed Organic Light-Emitting Devices.

A Cost-Effective Strategy to Modify the Electrical Properties of PEDOT:PSS via Femtosecond Laser Irradiation

pH-neutral PEDOT:PSS as hole injection layer in polymer light emitting diodes

Conductivity and Stability Enhancement of PEDOT:PSS Electrodes via Facile Doping of Sodium 3-Methylsalicylate for Highly Efficient Flexible Organic Light-Emitting Diodes

Thermally activated delayed fluorescent polymer- assisted morphological control on perfluorinated ionomer enriched surface and exciton harvesting for phosphorescent organic light-emitting devices

Optimizing QLED Performance and Stability via the Surface Modification of PEDOT:PSS Experimental Insights and DFT Calculations

Methanol Treatment on Low-Conductive PEDOT:PSS to Enhance the PLED's Performance

Modification of PEDOT:PSS thin film properties using pyridine-based solid additive for optoelectronic applications

Effect of Nonionic Surfactant Additive in PEDOT:PSS on PFO Emission Layer in Organic-Inorganic Hybrid Light-Emitting Diode

Boosting the Efficiency and Stability of Perovskite Light-Emitting Devices by a 3-Amino-1-propanol-Tailored PEDOT:PSS Hole Transport Layer

Solution-Processed Self-Stratifying Layer with Controllable Dielectric Polarization for High-Luminance Organic Light-Emitting Diodes

Solvent Treatment As an Efficient Anode Modification Method to Improve Device Performance of Polymer Light-Emitting Diodes

Modified PEDOT-PSS Conducting Polymer as S/D Electrodes for Device Performance Enhancement of P3HT TFTs

Enhanced flexibility and stability of PEDOT:PSS electrodes through interfacial crosslinking for flexible organic light-emitting diodes

Influence of Perfluorinated Ionomer in PEDOT:PSS on the Rectification and Degradation of Organic Photovoltaic Cells

Mitigating Detrimental Effect of Self‐Doping Near the Anode in Highly Efficient Organic Solar Cells

A New PEDOT Derivative for Efficient Organic Solar Cell with a Fill Factor of 0.80

Semiconductive Polymer-Doped PEDOT with High Work Function, Conductivity, Reversible Dispersion, and Application in Organic Solar Cells

Improving Efficiency of Blue Organic Light-Emitting Diode with Sulfobutylated Lignin Doped Pedot As Anode Buffer Layer

Performance Enhancement of Perovskite Quantum Dot Light-Emitting Diodes via Management of Hole Injection