Abstract:Poly(3,4-ethylenedioxythiophene): poly (styrenesulfonic acid) (PEDOT: PSS) is one of the most successful conductive polymers, usually used as hole injecting layer in organic light-emitting devices. Due to low conductivity and unsatisfied work function (WF), the modification of PEDOT:PSS with some additives has been proved to be cost-effective. Perfluorinated ionomer (PFI) has been reported as an effective additive to improve the WF of PEDOT:PSS, increasing from 5.2 eV to 5.95 eV with a recipe of PEDOT(1):PSS(6):PFI(25). However, the strong hydrophobicity of PFI has limited the choice of the organic solvents used to fabricate the uniform emitting layer on the modified PEDOT:PSS. To address this issue, the polymers were introduced as the additive of the emitter to overcome the non-uniform morphology on the hydrophobic surface of PEDOT:PSS:PFI. A conventional fluorescent polymer poly(9-vinylcarbazole) (PVK) and a thermally activated delayed fluorescent polymer (4-(2-(9-(heptadecan-9-yl)-6-phenyl-9H-carbazol-3-yl)-9,9-dihexyl-7-phenylacridin-10(9H)-yl)phenyl) (phenyl)methanone (PABPC2.5) were compared in parallel to reveal the influence of the polymer additive of the emitters on the overall performances of the devices. The control devices based on the PFI-modified PEDOT:PSS achieved a maximum current efficiency (CE) of 0.14 cd A-1, without any polymer additives in the emitting layer. In contrast, the CE of the devices with PVK and PABPC2.5 were dramatically elevated to 7.1 cdA-1 and 4.5 cd A-1 respectively, when a small molecular thermally activated delayed fluorescence was employed as the emitter. Enabled by a easily soluble phosphorescent emitter acetylacetonatobis(4-(4-tert-butylphenyl)-thieno[3,2-c]pyridinato-C2,N)iridium (PO-01-TB). The device with PABPC2.5 as the additive obtained a maximum CE of 42.0 cd A-1, which is significantly higher than 15.7 cd A-1 of the one with the additive PVK, attributed to the energy transfer in the emitting layer. The polymer additives not only overcome the issue of the hydrophobicity of the modified PEDOT:PSS but endow the exciton harvesting from the polymer to the small molecular emitters.

Effect of Nonionic Surfactant Additive in PEDOT:PSS on PFO Emission Layer in Organic-Inorganic Hybrid Light-Emitting Diode

Polarized Blue Polymer Light-Emitting Diodes Utilizing Rubbed Hole Injection Layers

Thermally activated delayed fluorescent polymer- assisted morphological control on perfluorinated ionomer enriched surface and exciton harvesting for phosphorescent organic light-emitting devices

Interface Formation Between Poly(9,9-Dioctylfluorene) and Poly(3,4-Ethylenedioxythiophene): Poly(Styrenesulfonic Acid)

Influence of Perfluorinated Ionomer in PEDOT:PSS on the Rectification and Degradation of Organic Photovoltaic Cells

A Cost-Effective Strategy to Modify the Electrical Properties of PEDOT:PSS via Femtosecond Laser Irradiation

Improving Efficiency and Color Purity of Poly(9,9-Dioctylfluorene) Through Addition of A High Boiling-Point Solvent of 1-Chloronaphthalene

Semi-orthogonal Solution-Processed Polyfluorene Derivative for Multilayer Blue Polymer Light-Emitting Diodes

Efficient Blue Polymer Light Emitting Diode Based on Doping Polyfluorene with Surfactantlike Additives

Feasible Modification of PEDOT:PSS by Poly(4-styrenesulfonic Acid): a Universal Method to Double the Efficiencies for Solution-Processed Organic Light-Emitting Devices.

Effects of β Phase on Light Emission from Polythiophenes‐Doped Polyfluorene

Enhanced flexibility and stability of PEDOT:PSS electrodes through interfacial crosslinking for flexible organic light-emitting diodes

Correlation of Emulsion Chemistry, Film Morphology, and Device Performance in Polyfluorene LEDs Deposited by RIR-MAPLE

Conductivity and Stability Enhancement of PEDOT:PSS Electrodes via Facile Doping of Sodium 3-Methylsalicylate for Highly Efficient Flexible Organic Light-Emitting Diodes

Effect of Wetting Surfactants on the Work Function of PEDOT:PSS for Organic Solar Cells

Polyfluorenes for Device Applications

Solution-Processed Self-Stratifying Layer with Controllable Dielectric Polarization for High-Luminance Organic Light-Emitting Diodes

Fluorescent, Carrier‐Trapping Dopants for Highly Efficient Single‐Layer Polyfluorene LEDs

Synthesis and Electron Transporting Properties of Diblock Copolymers Consisting of Polyfluorene and Polystyrene

Efficient Perovskite Light‐Emitting Diodes with a Siloxane‐Blended Organic Hole Transport Layer

Improved Electroluminescence Efficiency of Polyfluorenes by Simultaneously Incorporating Dibenzothiophene-S,s-dioxide Unit in Main Chain and Oxadiazole Moiety in Side Chain