Abstract:We have demonstrated an anisotropic bulk SmFe12-based sintered magnet with sufficiently large coercivity of μ0Hc=1.0 T and a remanence ratio (Mr/Ms) of 0.84 using conventional liquid sintering process of nitrogen jet-milled powders with the nominal composition of Sm8Fe73.5Ti8V8Ga0.5Al2 (at.%). The moderate saturation magnetization of μ0Ms =0.74 T is due to the dissolution of a large amount of stabilizing elements, Ti, V, and Al, in the 1:12 phase. The anisotropy field of the main 1:12 phase was determined to be µ0HA=10.2 T. Detailed multi-scale microstructure characterizations by scanning electron microscope (SEM) and scanning transmission electron microscope (STEM) showed the magnet consists of Sm(Fe,Ti,V,Al)12 grains with the ThMn12-type crystal structure with a size distribution of ∼3−15µm that are enveloped by ∼3 nm thick Sm-rich amorphous intergranular phase. Secondary phases including metallic (Sm,Ga)-rich, SmOx, and Fe2(Ti,V) phases coexist with the 1:12 phase. Measured angular dependence of coercivity follows Kondorsky type magnetization reversal, suggesting the coercivity arises due to the pining of magnetic domain walls. Magneto-optical Kerr effect (MOKE) microscopy revealed magnetization reversal starts at the grain boundaries and interphase interfaces and thin amorphous intergranular phases act as the pinning sites against magnetic domain wall propagation. Small micromagnetic parameter α∼0.164 estimated by fitting to the Kronmüllar equation suggest that the reduction of the grain size and engineering of the intergranular phase to an Fe-lean composition are necessary to improve the coercivity toward µ0HA/3=3.4 T. This work provides guidelines on an optimum microstructure to develop an anisotropic bulk SmFe12-based sintered magnet with a sufficiently large coercivity.

Preparation and Magnetic Properties of Magnetically Anisotropic 2:17-Type SmCo Alloy Spherical Particles

Fe65B22Nd9Mo4 bulk nanocomposite permanent magnets produced by crystallizing amorphous precursors

Strategies for the Synthesis of Nanostructured SmCo 5 Magnetic Particles for Permanent Magnetic Application

Study of the Anisotropic Sm2Fe17N3 Powders with High Performance

Coercivity mechanism of high-performance anisotropic heterostructure SmCo 5 magnets

2:17-type SmCo quasi-single-crystal high temperature magnets

Atomic-scale structure clarification of the planar Z phase and its influence on the magnetic properties in Sm(CoFeCuZr) permanent magnets

Effect of interfacial stress on microchemistry and coercivity in 2:17-type SmCo sintered magnets

Microstructure and magnetic properties of SmCo5 sintered magnets

Correlation of mechanical anisotropy with fine grain strengthening for Sm2Co17-type sintered permanent magnets

High coercivity SmCo5 synthesized with assistance of colloidal SiO2

Origin of coercivity in an anisotropic Sm(Fe,Ti,V)12-based sintered magnet

Anisotropic SmFe10V2 Bulk Magnets with Enhanced Coercivity via Ball Milling Process

Microstructure and extrinsic magnetic properties of anisotropic Sm(Fe,Ti,V)12-based sintered magnets

High remanence Fe‐rich 2:17‐type Sm‐Co sintered magnets mediated via multi‐scale microstructure

Silicide coating stabilized high temperature performance and oxidation resistance mechanism of 2:17-type SmCo permanent magnets

Preparation and Magnetic Properties of Anisotropic (sm,pr)co5/co Composite Particles

Large Coercivity and High Remanence in Iron‐Rich 2:17‐Type SmCo Magnets:Effect of Dislocation on Solid‐Solution Precursors

High performance 2:17 type SmCo permanent magnets with low temperature coefficients

Dispersible SmCo5 nanoparticles with huge coercivity

Growth of defects around grain boundary and evolution of cellular structure during isothermal aging process in 2:17-type SmCo permanent magnets