Enhancement of Low-Temperature Gas-Sensing Performance Using Substoichiometric WO 3– x Modified with CuO
Fang Peng,Weiwei Yu,Yue Lu,Yan Sun,Xiuli Fu,Jia ming Hao,Xin Chen,Rui Cong,Ning Dai
DOI: https://doi.org/10.1021/acsami.0c09213
2020-08-17
Abstract:To verify the effect of oxygen vacancy on gas sensitivity, we have systematically investigated the gas-sensing performance of copper oxide/substoichiometric tungsten oxide (CuO/WO<sub>3-<i>x</i></sub>) nanocomposite sensors. Oxygen deficiency in WO<sub>3-<i>x</i></sub> facilitates the reaction of hydrogen sulfide (H<sub>2</sub>S) gas with chemisorbed oxygen species (i.e., O<sub>2</sub><sup>-</sup>, O<sup>-</sup>, and O<sup>2-</sup>) at low temperature. The oxygen/sulphur exchange reaction between CuO and H<sub>2</sub>S in the sensing process can achieve room temperature operation of gas sensors. After the WO<sub>3-<i>x</i></sub> nanorods were modified by a low content of CuO nanoparticles (Cu:W = 1:20), the sensors present an <i>n</i>-type sensing behavior. Their best working temperatures drop from 289 °C (or 386 °C) to 99 °C (or 70 °C) at which the responses are improved by 14 to 163 times for different <i>x</i> values. Among them, CuO(L)/W<sub>5</sub>O<sub>14</sub> shows the highest sensitivity of 1575.7 to 10 ppm H<sub>2</sub>S at 99 °C and 171.5 to 10 ppm H<sub>2</sub>S at room temperature. Once WO<sub>3-<i>x</i></sub> were loaded with a high concentration of CuO nanoparticles (Cu:W = 1:2), they exhibit a <i>p</i>-type behavior, and the optimal working temperatures reduce suddenly to room temperature at which CuO(H)/W<sub>18</sub>O<sub>49</sub> displays the most sensitive response of 7.2 even toward trace amounts of H<sub>2</sub>S as low as 100 ppb. In addition, <i>p</i>-type CuO weakens the metal-like characteristics of W<sub>18</sub>O<sub>49</sub> and such weakening effect enhances with an increase in the CuO content. Therefore, the sensing performance of the CuO/W<sub>18</sub>O<sub>49</sub> composite is the best among the four CuO/WO<sub>3-<i>x</i></sub> sensors. The two designs for low and high Cu/W molar ratios all achieve enhanced room-temperature H<sub>2</sub>S gas response, with a fast recovery time of ∼60 s under heating pulse, as well as an excellent selectivity, which makes the sensors a promising candidate for practical applications. Moreover, the micro-Raman spectra confirmed CuS formation and the thermal effect on the decomposition of CuS in the sensing process was studied.
materials science, multidisciplinary,nanoscience & nanotechnology