Abstract:During the acceleration process of an air-breathing propulsion vehicle, when the Mach number is closed to the transition point of the combustion mode, the drag force increases and thrust-to-drag reduces. Thus, equivalence ratio and higher values of heat release are demanded. A shock train will form in an isolator and will climb upstream as the backpressure increasing. In now days, a jumping characteristic was found as the shock train climbs upstream, while the deep mechanism is still not clear. Few works focus on the limits that trigger a jumping of the shock train. This paper aims to investigate the boundary of the trigger condition for it, which is named as the limits of a shock train jumps. Numerical study was carried out in a Mach 5 inlet-isolator model, and the shock train jumping movements were captured. The results indicate a local throat-like shape was formed by the separated flow at the head of the shock train, and the contraction ratio of the local throat-like shape was reduced to a small value when shock train jumping occurred. Based on the numerical data, the minimum value of the contraction ratio was discussed with flow physics. The reason that the head of a shock train jumps upstream with separation zone was discussed by a theoretical analysis, which assumed that the core flow is compressed through an oblique shock, normal shock, and returns to sonic at the local throat that formed by the throat-like shape at the head of the shock train. Then, a coefficient of correction was set for the minimum value of the local contraction ratio, which is used to improve the robustness of this analytical method. At last, the analysis method for limits of shock train jumps was employed for the experimental results. The phenomenon that a varied contraction ratio of a local throat-like shape was reproduced in the experiment and the analysis method in this paper was validated.

Control of Shock Oscillations with Successive Ramps in a Hypersonic Inlet-Isolator

A simulation model with numerical method and optimal control of magneto-rheological shock isolator

Micro-Ramp Control for Shock Train Structure and Oscillation

Experimental Investigation of Micro-Ramp Control for Shock Train under Various Incoming Flow Conditions

Numerical Study of Active Shock Control for Transonic Aerodynamics

Experimental Study on Dynamic Characteristics of Shock Train in an Isolator with Different Types of Incident Shocks

Closed-loop Control of Shock Train in Inlet-Isolator with Incident Shocks

Distributed Fluidic Control Method for Alleviating Rapid Movement of Shock Train

Oscillation Of The Shock Train In An Isolator With Incident Shocks

Preliminary Investigation of Limits of Shock Train Jumps in a Hypersonic Inlet-Isolator

Periodic forcing of a shock train in a scramjet inlet-isolator at overspeed condition

Hysteresis Behavior of Shock Train Driven by Continuous Incoming Mach Number Variation in an Isolator with Background Waves

Experimental Investigation of the Transonic Shock Oscillation Characteristics in a Heavy-Duty Gas Turbine Compressor Cascade

Experimental Study on Shock Wave Control in High-Enthalpy Hypersonic Flow by Using SparkJet Actuator

Forced Shock Oscillation Control in Supersonic Intake Using Fluid–Structure Interaction

Path Dependence Characteristic of Shock Train in a 2D Hypersonic Inlet with Variable Background Waves

Numerical Investigation on the Forced Oscillation of Shock Train in Hypersonic Inlet with Translating Cowl

Flow characteristics and stability of induced shock waves in the isolator of rotating detonation ramjet under flight Mach number 2.5 conditions

Vortical structures and density fluctuations analysis of supersonic forward-facing step controlled by self-sustaining dual synthetic jets

Numerical Investigation on Behaviors of Shock Train in a Hypersonic Inlet with Translating Cowl

Large-eddy Simulation of Shock-Wave/boundary-layer Interaction Control Using a Backward Facing Step