Abstract:Wake vortex evolution of a square cylinder with a slot synthetic jet issuing from the cylinder’s rear surface has been experimentally investigated using the time-resolved particle image velocimetry technique. The Reynolds number based on the side length of the square cylinder is $Re=836$. The excitation frequency normalized by the natural shedding frequency $f_{e}/f_{0}$ varies from 0 to 6 at the dimensionless stroke length $L_{0}/w=72.6$. The distributions of the time-averaged Reynolds stresses present significant differences as the excitation frequency increases. With control, the mean streamwise velocity deficit of the wake recovers more quickly in comparison with the natural case, and the vertical velocity fluctuation intensity becomes weaker. Moreover, a drag reduction can be achieved for the control cases, especially, for $f_{e}/f_{0}=4$ and $f_{e}/f_{0}=6$, a thrust instead of drag reduction can be obtained. The profiles of the mean streamwise velocity tend to have jet-like distributions. The wake vortex dynamics and its evolution with the excitation frequency are revealed. (i) For the low excitation frequency cases ($f_{e}/f_{0}=0.5$, 1, 2), no significant changes in the dominant frequency and the spanwise vortex structures are observed in comparison with the natural case. (ii) For the moderate excitation frequency case ($f_{e}/f_{0}=3$), the wake vortex shedding frequency is locked on half of the control frequency. In this case, the shear layer is divided into two parts by the synthetic jet vortex, and the wake vortices with smaller scales still shed asymmetrically and appear closer to the square cylinder. (iii) For the high excitation frequency case ($f_{e}/f_{0}=6$), the flow is governed by the synthetic jet. As a result of strong perturbations of the synthetic jet, the wake vortex shedding becomes symmetric with the shedding frequency consistent with the control frequency. And the separation is suppressed effectively. The different control effects of the slot synthetic jet on a square cylinder and a circular cylinder are also compared in detail. Generally speaking, the circular cylinder is easier to be controlled due to its non-fixed separation points.

Vortical structures and density fluctuations analysis of supersonic forward-facing step controlled by self-sustaining dual synthetic jets

Wake Vortex Evolution of Square Cylinder with A Slot Synthetic Jet Positioned at the Rear Surface

Analysis Of Synthetic Jet Piv Experiment Based On Dynamic Mode Decomposition

Influences of microjet pressure and number of microjets on the control of shock wave/boundary layer interaction

Supersonic Cavity Flow Control Using Plasma Synthetic Jet Actuators

Characteristics of Supersonic Sweeping Jet with Geometry Variation of Actuator Exits

The Effect of Micro-Ramps on Supersonic Flow over A Forward-Facing Step

High-speed micro-actuation in a supersonic dual-stream jet flow

Fine Structures and the Unsteadiness Characteristics of Supersonic Flow over Backward Facing Step Via Npls

High-speed microactuation in a supersonic dual-stream jet flow

Flow control in supersonic flow field based on micro jets

Control of shock wave/boundary layer interaction induced by the microjet configuration

Schlieren-Based Analysis of Supersonic Multistream Control Using Data-Driven and Filtering Techniques

Perturbation-based active flow control in overexpanded to underexpanded supersonic rectangular twin jets

Fine Structures of Supersonic Laminar Flow over a Backward Facing Step at <Emphasis Type="Italic">Ma</Emphasis>=3.0,3.8

Flow Control of Annular Compressor Cascade by Synthetic Jets

A zero-net-mass-flux wake stabilization method for blunt bodies via global linear instability

On the double-sided shock diffractions in quiescent and supersonic crossflows

Study on propagation mechanisms of the actuations generated by plasma synthetic jet actuator in a supersonic flow

Flow Dynamics and Noise Generation Mechanisms in Supersonic Underexpanded Rectangular and Planar Jets

Square cylinder flow controlled by a synthetic jet at one leading edge