Abstract:Purpose In recent years, owing to the rapidly increasing labor costs, the demand for robots in daily services and industrial operations has been increased significantly. For further applications and human–robot interaction in an unstructured open environment, fast and accurate tracking and strong disturbance rejection ability are required. However, utilizing a conventional controller can make it difficult for the robot to meet these demands, and when a robot is required to perform at a high-speed and large range of motion, conventional controllers may not perform effectively or even lead to the instability. Design/methodology/approach The main idea is to develop the control law by combining the SMC feedback with the ADRC control architecture to improve the robustness and control quality of a conventional SMC controller. The problem is formulated and solved in the framework of ADRC. For better estimation and control performance, a generalized proportional integral observer (GPIO) technique is employed to estimate and compensate for unmodeled dynamics and other unknown time-varying disturbances. And benefiting from the usage of GPIO, a new SMC law can be designed by synthesizing the estimation and its history. Findings The employed methodology introduced a significant improvement in handling the uncertainties of the system parameters without compromising the nominal system control quality and intuitiveness of the conventional ADRC design. First, the proposed method combines the advantages of the ADRC and SMC method, which achieved the best tracking performance among these controllers. Second, the proposed controller is sufficiently robust to various disturbances and results in smaller tracking errors. Third, the proposed control method is insensitive to control parameters which indicates a good application potential. Originality/value High-performance robot tracking control is the basis for further robot applications in open environments and human–robot interfaces, which require high tracking accuracy and strong disturbance rejection. However, both the varied dynamics of the system and rapidly changing nonlinear coupling characteristic significantly increase the control difficulty. The proposed method gives a new replacement of PID controller in robot systems, which does not require an accurate dynamic system model, is insensitive to control parameters and can perform promisingly for response rapidity and steady-state accuracy, as well as in the presence of strong unknown disturbances.

Position Regulation of Industrial Robots Via Bounded Integral Terminal Sliding Mode Control Algorithm

Global Sliding Mode Control Of Electro-Hydraulic 6-Dof Parallel Robots

Adaptive PID Saturate Output Feedback Control of Robot Manipulators

Time-Optimal Constrained Adaptive Robust Control of Single-DOF Mechanical Systems: A Comparative Study with BLF-based Methods

Tansig type NLESO-based integral terminal sliding mode control for modular robot manipulators with uncertain disturbance: Theory and experimental verification

A Novel Robotic Motion Control Strategy Based on Improved Fuzzy PID and Feedforward Compensation

Adaptive Continuous Barrier Function Terminal Sliding Mode Control Technique for Disturbed Robotic Manipulator

Decentralized fault-tolerant control of modular robot manipulators with actuator saturation: neural adaptive integral terminal sliding mode-based control approach

An Adaptive Discrete Integral Terminal Sliding Mode Control Method for a Two-Joint Manipulator

Active disturbance rejection sliding mode control for robot manipulation

Adaptive Dynamic Boundary Sliding Mode Control for Robotic Manipulators under Varying Disturbances

Fixed-time Integral Sliding Mode Control for Admittance Control of a Robot Manipulator

Robust controller design and experimental validation based on bounded uncertainty for collaborative industrial robots

Robust Adaptive PID Control of Robot Manipulator with Bounded Disturbances

Robust Adaptive Fixed-Time Sliding-Mode Control for Uncertain Robotic Systems With Input Saturation

Extreme-learning-machine-based robust integral terminal sliding mode control of bicycle robot

Fixed‐Time Sliding Mode Control for Robotic Manipulators Based on Disturbance Observer

Position/Attitude Cascade Regulation of Nonholonomic Four-Wheeled Mobile Robot via Double-Loop Sliding-Mode Control Mechanism

Control of Nonlinear Systems Using Terminal Sliding Modes

Design of Robust Terminal Sliding Mode Control for Underactuated Flexible Joint Robot