Abstract:Honeycomb structures have found numerous applications as structural and biomedical materials due to their favourable properties such as low weight, high stiffness, and porosity. Application of additive manufacturing and 3D printing techniques allows for manufacturing of honeycombs with arbitrary shape and wall thickness, opening the way for optimizing the mechanical and physical properties for specific applications. In this study, the mechanical properties of honeycomb structures with a new geometry, called octagonal honeycomb, were investigated using analytical, numerical, and experimental approaches. An additive manufacturing technique, namely fused deposition modelling, was used to fabricate the honeycomb from polylactic acid (PLA). The honeycombs structures were then mechanically tested under compression and the mechanical properties of the structures were determined. In addition, the Euler-Bernoulli and Timoshenko beam theories were used for deriving analytical relationships for elastic modulus, yield stress, Poisson's ratio, and buckling stress of this new design of honeycomb structures. Finite element models were also created to analyse the mechanical behaviour of the honeycombs computationally. The analytical solutions obtained using Timoshenko beam theory were close to computational results in terms of elastic modulus, Poisson's ratio and yield stress, especially for relative densities smaller than 25%. The analytical solutions based on the Timoshenko analytical solution and the computational results were in good agreement with experimental observations. Finally, the elastic properties of the proposed honeycomb structure were compared to those of other honeycomb structures such as square, triangular, hexagonal, mixed, diamond, and Kagome. The octagonal honeycomb showed yield stress and elastic modulus values very close to those of regular hexagonal honeycombs and lower than the other considered honeycombs.

Analyzing In-Plane Mechanics of a Novel Honeycomb Structure with Zero Poisson's Ratio

A novel three-dimensional orthogonal star honeycomb structure with negative Poisson’s ratio

Linear In-Plane Elasticity of a Polygon Honeycomb Core with Zero Poisson's Ratio

Mechanical performance study of high flexibility arrow-shaped concave arc bottoms negative Poisson's ratio honeycomb structure

Experimental and numerical analysis of a bolted reinforced honeycomb with tunable Poisson's ratio

Novel 2D star-shaped honeycombs with enhanced effective Young’s modulus and negative Poisson’s ratio

A novel butterfly-shaped auxetic structure with negative Poisson’s ratio and enhanced stiffness

Graded negative Poisson’s ratio honeycomb structure design and application

Equivalent In-Plane Elastic Moduli of Honeycomb Materials under Hypergravity Conditions

Static and dynamic properties of star-shaped honeycomb sandwich panels

The 3D-Printed Honeycomb Metamaterials Tubes with Tunable Negative Poisson's Ratio for High-Performance Static and Dynamic Mechanical Properties

Mechanical properties of a novel negative Poisson's ratio gradient structure

Mechanics Characteristics of a 3D Star-Shaped Negative Poisson's Ratio Composite Structure

The 3D-Printed Honeycomb Metamaterials Tubes with Tunable Negative Poisson’s Ratio for High-Performance Static and Dynamic Mechanical Properties

Design 3D improved star-shaped honeycomb with different tip angles from 2D analytical star-shaped model

A Novel Chiral Three-Dimensional Material with Negative Poisson’s Ratio and the Equivalent Elastic Parameters

Three-dimensional enhanced star-shaped honeycombs with negative thermal expansion

Mechanical properties of additively manufactured octagonal honeycombs

Mechanical Behavior of 3D-Printed Thickness Gradient Honeycomb Structures

Investigation into quasi-static compressive behaviors of several kinds of honeycomb like structures in three axial directions

Multi-objective optimization and theoretical analysis of re-entrant structure with enhanced mechanical properties