Abstract:The ultrafine composite fibers based on the composites of binary fatty acid eutectics and polyethylene terephthalate (PET) with varied fatty acid eutectics/PET mass ratios (50/100, 70/100, 100/100 and 120/100) were fabricated using the technique of electrospinning as form-stable phase change materials (PCMs). The five binary fatty acid eutectics including LA-MA, LA-PA, MA-PA, MA-SA and PA-SA were prepared according to Schrader equation, and then were selected as an innovative type of solid-liquid PCMs. The results characterized by differential scanning calorimeter (DSC) indicated that the prepared binary fatty acid eutectics with low phase transition temperatures and high heat enthalpies for climatic requirements were more suitable for applications in building energy storage. The structural morphologies, thermal energy storage and thermal stability properties of the ultrafine composite fibers were investigated by scanning electron microscope (SEM), DSC and thermogravimetric analysis (TGA), respectively. SEM images revealed that the electrospun binary fatty acid eutectics/PET ultrafine composite fibers possessed the wrinkled surfaces morphologies compared with the neat PET fibers with cylindrical shape and smooth surfaces; the grooves or ridges on the corrugated surface of the ultrafine composite fibers became more and more prominent with increasing fatty acid eutectics amount in the composite fibers. The fibers with the low mass ratio maintained good structural morphologies while the quality became worse when the mass ratio is too high (more than 100/100). DSC measurements suggested that the heat enthalpies of melting and crystallization of the ultrafine composite fibers increased gradually with increasing fatty acid eutectics amounts, but their phase transition temperatures had almost no obvious variation as relative to the corresponding fatty acid eutectics. Meanwhile, the characteristic temperatures and heat enthalpies of the ultrafine composite fibers varied with the different types of binary fatty acid eutectics. TGA results indicated that the degradation of electrospun binary fatty acid eutectics/PET ultrafine composite fibers with representative mass ratio of 100/100 had two steps and corresponded respectively to the degradations of binary fatty acid eutectics and PET polymer chains; and the charred residue at 700 degrees C of the composite fibers was lower than that of the neat PET fibers. It could be envisioned that the electrospun binary fatty acid eutectics/PET composite fibers would be extensively used for latent heat storage in the field of building energy conservation. (C) 2012 Elsevier Ltd. All rights reserved.

Upcycling of PET Plastics into Diethyl Terephthalate for Applications As Phase Change Materials in Energy Harvesting

Rapid UV-Curable Form-Stable Polyethylene-Glycol-Based Phase Change Material

Preparation of photothermal conversion and energy storage microcapsules based on Pickering emulsions with poly ( p -phenylenediamine) as stabilizer and photothermal materials

Expanded waste glass/methyl palmitate/carbon nanofibers as effective shape stabilized and thermal enhanced composite phase change material for thermal energy storage

Design of a graphene oxide@melamine foam/polyaniline@erythritol composite phase change material for thermal energy storage

Preparation, Characterization, and Thermal Properties of Microencapsulated Phase Change Material for Low-Temperature Thermal Energy Storage

A novel composite phase change material of high-density polyethylene/d-mannitol/expanded graphite for medium-temperature thermal energy storage: Characterization and thermal properties

Synthesis and Performance of Thermoplastic Polyurethane-Based Solid–Solid Phase-Change Materials for Energy Storage

Microencapsulated N-Octadecane with Different Methylmethacrylate-Based Copolymer Shells As Phase Change Materials for Thermal Energy Storage

Modified Supporting Materials to Fabricate Form Stable Phase Change Material with High Thermal Energy Storage

Green, recyclable and high latent heat form-stable phase change composites supported by cellulose nanofibers for thermal energy management

Carbon dots efficiently enhance photothermal conversion and storage of organic phase change materials through interfacial interaction

Shape-stable phase change composites based on carbonized waste pomelo peel for low-grade thermal energy storage

Thermally recyclable polyester-based phase change materials networks with high latent heat and network self-stability even at high temperature

Preparation, Morphology and Thermal Properties of Electrospun Fatty Acid Eutectics/polyethylene Terephthalate Form-Stable Phase Change Ultrafine Composite Fibers for Thermal Energy Storage

Preparation and Thermal Properties of Fatty Acid/diatomite Form-Stable Composite Phase Change Material for Thermal Energy Storage

Microencapsulation and Thermal Properties of Myristic Acid with Ethyl Cellulose Shell for Thermal Energy Storage

Fabrication and Characterization of a Novel Polyurethane Microencapsulated Phase Change Material for Thermal Energy Storage

Preparation and Thermal Properties of Propyl Palmitate-Based Phase Change Composites with Enhanced Thermal Conductivity for Thermal Energy Storage

Sandwich Fibrous PEG Encapsulations for Thermal Energy Storage

Wax from Pyrolysis of Waste Plastics as a Potential Source of Phase Change Material for Thermal Energy Storage