Abstract:Microsized SiOx has been vigorously investigated as an advanced anode material for next-generation lithium-ion batteries. However, its practical application is seriously hampered by its huge volume variation during the repeated (de)lithiation process, which destroys the microparticle structure and results in rapid capacity fading. Herein, we propose the usage of trans-difluoroethylene carbonate (DFEC) as an electrolyte additive to maintain the structural integrity of microsized SiOx with a uniform carbon layer (SiOx@C). Compared with ethylene carbonate and fluoroethylene carbonate, DFEC has lower lowest unoccupied molecular orbital energy and higher reduction potential, which is easily reduced and promotes the in situ formation of a more stable LiF-rich solid electrolyte interphase (SEI) on the surface of anode materials. The LiF-rich SEI exhibits enhanced mechanical rigidity and ionic conductivity, thus enabling the microsized SiOx@C anodes' excellent lithium storage stability and high average Coulombic efficiency.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c05379?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c05379</a>.The values of ionic conductivities of EC, FEC, and DFEC-based electrolytes, SEM and TEM images of SiOx@C microparticles, PSD curve and TG analysis profiles of SiOx@C microparticles, XRD patterns of SiOx@C microparticles, the long-term cycling performance of graphite and SiOx@C composite anodes, SEM image of surface morphology for the SiOx@C electrode, cross-sectional SEM images of the SiOx@C anodes before and after 200 cycles, SEM images of the SiOx@C anode after 200 cycles in the three electrolytes, charge and discharge profiles of Li||SiOx@C at different current densities, initial discharge profiles of Li||SiOx@C with a current density of 0.01 C and corresponding differential capacity (dQ/dV) profiles, TEM images of SiOx@C anodes after the first cycle, and TEM image and the corresponding EDS elemental mapping images of C, O, Si, and F of the SiOx@C anode in the three electrolytes after 200 cycles (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c05379/suppl_file/am1c05379_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Stabilizing Electrode-Electrolyte Interface for High-Performance SiOx Anode by Dual Electrolyte Additive

Stabilizing electrode-electrolyte interface for high-performance SiO x anode by dual electrolyte additive

Three-dimensional Dual-Layered Conductive Binder Enables Stable and High Performance of SiOx/C Anodes

Rectifying Solid Electrolyte Interphase Structure for Stable Multi-Dimensional Silicon Anodes

Constructing a Robust Solid-Electrolyte Interphase Layer via Chemical Prelithiation for High-Performance SiO<i><sub>x</sub></i> Anode

Constructing a Robust Solid–Electrolyte Interphase Layer Via Chemical Prelithiation for High‐Performance SiOx Anode

An Effective Strategy on Synthesizing a Stable SiOx‐Based Anode for High Density Lithium‐Ion Batteries

Constructing Highly Stable Solid Electrolyte Interphase for Si@Graphene Anodes by Coupling 2-Isocyanatoethyl Methacrylate and Fluoroethylene Carbonate

SiOx/C anodes with high initial coulombic efficiency through the synergy effect of pre-lithiation and fluoroethylene carbonate for lithium-ion batteries

Weakly Solvated Electrolyte Enables the Robust Solid Electrolyte Interface on Siox Anodes for Lithium-Ion Battery

Strengthening the Interfacial Stability of the Silicon-Based Electrode via an Electrolyte Additive─Allyl Phenyl Sulfone

Li-Si alloy pre-lithiated silicon suboxide anode constructing a stable multiphase lithium silicate layer promoting Ion-transfer kinetics

An Ultrahigh-Areal-capacity SiOx Negative Electrode for Lithium Ion Batteries

Robust and Fast‐Ion Conducting Interphase Empowering SiO x Anode Toward High Energy Lithium–Ion Batteries

trans -Difluoroethylene Carbonate as an Electrolyte Additive for Microsized SiO x @C Anodes

Epitaxial Metal–Organic Framework for Stabilizing the Formation of a Solid Electrolyte Interphase on the Si Anode of a Lithium-Ion Battery

Stable operation of SiO anodes enabled by a multifunctional molecular crosslinker

Boosting fast electrode reaction kinetics of silicon suboxide anodes by fluoroethylene carbonate-based electrolyte

Thermal polymerization of ion-modified carbon dots into multi-functional LiF-carbon interface for stabilizing SiO anode

Favored Amorphous LixSi Process with Restrained Volume Change Enabling Long Cycling Quasi‐solid‐state SiOx anode

Tuning Reaction Kinetics of Fluorinated Molecules to Construct Robust Solid Electrolyte Interphases on SiOx Anode