Abstract:Here, a novel PVDF-HFP/PI side-by-side bicomponent electrospun separator with cross-linked structure is successfully fabricated for lithium-ion batteries (LIBs). The bicomponent composite fiber not only integrates the excellent characteristics of PVDF-HFP and PI, but also improves the mechanical strength of the electrospun nonwoven and maintains a high level of porosity, up to 85.9 %. Moreover, the PVDF-HFP/PI(T) fibrous separator emerges outstanding performance, including the thermal dimensional stability (up to 200 °C), self-extinguishment, high electrolyte uptake (483.5 %), good ionic conductivity (1.78 × 10−3 S/cm), wide electrochemical stability window (up to 4.94 V vs. Li+/Li) and favorable interface structure. It is further confirmed by the 3D simulation that the PVDF-HFP/PI(T) nonwoven using as the LIBs separator is beneficial to the homogeneous transmission of lithium ions. As a result, the coin cells with PVDF-HFP/PI(T) separator possess the best first discharge capacity (120.41 mAh g−1) and coulombic efficiency (99.36 %) with respect to that of Celgard2320 separator and cross-electrospun PVDF-HFP + PI(T) separator. After 50 cycles, the discharge capacity of Li/PVDF-HFP/PI(T)/LiFePO4 is found to be retained around 98.13 %, which is higher than 94.91 % of Celgard2320 separator and 96.09 % of cross-electrospun PVDF-HFP + PI(T) separator. Moreover, the coin cell using the PVDF-HFP/PI (T) separator exhibited good discharge capacity under different discharge C-rate at 45 °C, indicating its potential for the high-temperature safety of LIBs. In sum, the PVDF-HFP/PI(T) nonwoven with excellent property has an application prospect in the field of LIBs separator, which also provides a reliable strategy for designing the electrospun separator with improved performance.

Construction of PMIA@PAN/PVDF-HFP/TiO2 Coaxial Fibrous Separator with Enhanced Mechanical Strength and Electrolyte Affinity for Lithium-Ion Batteries

Poly(m-phenylene isophthalamide) separator for improving the heat resistance and power density of lithium-ion batteries

High Thermal Resistance Polyimide Separators Prepared Via Soluble Precusor and Non-Solvent Induced Phase Separation Process for Lithium Ion Batteries

Copolymer-assisted Polypropylene Separator for Fast and Uniform Lithium Ion Transport in Lithium-ion Batteries

Novel Configuration of Polyimide Matrix-Enhanced Cross-Linked Gel Separator for High Performance Lithium Ion Batteries

Nano-silica-decorated Poly(m-Phenylene Isophthalamide) Separator with Enhanced Mechanical and Electrolyte Wetting Properties for Lithium-Ion Batteries

Polydopamine coated poly(m-phenylene isophthalamid) membrane as heat-tolerant separator for lithium-ion batteries

Hierarchical microstructure and performance of PVDF/PMMA/SiO2 lithium battery separator fabricated by thermally-induced phase separation (TIPS)

Nanonet-structured Poly(m-Phenylene Isophthalamide)–polyurethane Membranes with Enhanced Thermostability and Wettability for High Power Lithium Ion Batteries

Lithium ion battery separator with improved performance via side-by-side bicomponent electrospinning of PVDF-HFP/PI followed by 3D thermal crosslinking

WO3-composited polyimide nanofibrous separator with superior mechanical properties and high capacity for lithium-ion batteries

Novel Thermotolerant and Flexible Polyimide Aerogel Separator Achieving Advanced Lithium‐Ion Batteries

Electrospun polyimide@organic-montmorillonite composite separator with enhanced mechanical and thermal performances for high-safety lithium-ion battery

Molecular Sieve-Modified Separator for High-Performance Lithium-Ion Batteries

Electrospun PAN/cellulose composite separator for high performance lithium-ion battery

H-Bond Cross-Linked Polyimide Nanofiber-Modified Polyethylene Composite Separators for Lithium-Ion Batteries

High-stability core-shell structured PAN/PVDF nanofiber separator with excellent lithium-ion transport property for lithium-based battery

Thermotolerant separator of cross-linked polyimide fibers with narrowed pore size for lithium-ion batteries

Tissue paper-based composite separator using nano-SiO2 hybrid crosslinked polymer electrolyte as coating layer for lithium ion battery with superior security and cycle stability

In situ aluminide armored polyimide nanofiber separators with ultrahigh strength and high wettability for advanced lithium-ion batteries

Enhanced the mechanical strength of polyimide (PI) nanofiber separator via PAALi binder for lithium ion battery