Abstract:Process intensification can be achieved in specialty chemicals manufacturing via transition from batch-to-continuous processing. However, the absence of headspace in a continuous tubular reactor limits the ability to remove volatile byproducts from the reacting liquid flow. Previous studies showed that the production of succinimide dispersants follows a two-step amidation-dehydration pathway in which water is formed as a by-product. The inability to remove this water imposed a thermodynamic equilibrium limitation on the dehydration step, and hence necessitated a downstream drying step to obtain a dehydrated dispersant product within commercial specifications. In the present study, the use of an agitated, horizontal thin film evaporator (TFE) was investigated as a continuously operated reactive separator which combines reaction and dehydration into a single operating unit, reducing the overall cost and physical footprint of the process. The continuous TFE unit was first experimentally investigated as a stand-alone, integrated reactor-separator. Using this configuration, the obtained imide yield consistently exceeded the maximum thermodynamic yield at each operating temperature, confirming the efficiency of the integrated reaction and separation steps in the TFE. Next, the unit was modeled by integrating reaction kinetics with mass and energy balance equations, using appropriate correlations for heat and mass transfer from the literature which were verified for the experimental set-up. This model provided insights into the system behavior across different operating conditions, including the role of forward and reverse reactions along the TFE unit length. The model was then used to confirm the feasibility of replacing the two-step tubular reactor-evaporator process with a single TFE unit as an intensified reactive separator, further reducing the physical footprint of the process by enabling compact modular process designs.

Intensification of Diethyl Methylphosphite Synthesis Based on Kinetics Study and CFD Modeling

Study on Kinetics of Methyl Esterification of Alkali Weight-Reduction Wastewater Residue

Highly Selective Synthesis of Diphenylmethane with Acidic Ionic Liquids

Effective Phosphorylation of 2,2′-Methylene-bis(4,6-di- tert -butyl) Phenol in Continuous Flow Reactors

Dehydrochlorination of -chlorohydrin in continuous microflow system: Reaction kinetics and process intensification

Continuous Non - Solvent Production of Dimethyl Phosphite

Kinetic Study of the Removal of Dimethyl Phthalate from an Aqueous Solution Using an Anion Exchange Resin

Process intensification of the NH3 synthesis through in situ removal: Exploring the potential of sorption-enhancement

An imidazole-based DES serving as a "courier" for the efficient coupling of HCl capture and conversion under mild conditions

Process intensification for production of dispersants via integration of reaction and separation in a horizontal thin film evaporator

Kinetic Verification and Comsol Modeling of the Diels-Alder Reaction of Conjugated Pentadiene with Maleic Anhydride in a Continuous Flow Capillary Reactor

CFD Simulation of Methanol Dehydration Step through an Adiabatic Fixed-bed Reactor of DME Synthesis

Process Intensification of Chemical Phosphorus Removal in a Microreaction System

Experimental Study on Alkylation of PCl3 for Methyl-Dichloride Phosphine Synthesis Using Mass Spectrometry Detection

Optimization of Desulfurization Process via Choline Phosphotungstate Coupled with Persulfate Using Response Surface Methodology

Highly efficient synthesis of cyclic carbonates via deep eutectic solvents from CO 2 at the gas-liquid interface of microdroplet under atmospheric pressure condition

The scale-up of microwave flow syntheses by recirculation; The chlorine-free preparation of alkyl phenyl-H-phosphinates

Process Intensification of Heterogeneous Dehydrochlorination of Β-Chlorohydrins by Using N-Propanol As Co-Extractant

Highly Efficient Synthesis of Cyclic Carbonates Via Deep Eutectic Solvents from CO2 at the Gas-Liquid Interface of Microdroplet under Atmospheric Pressure Condition

Efficient Dimerization of Perfluoroolefin Catalyzed by Strong Nucleophilic Bifunctional Ionic Liquid

Solubilizer reconstructs the influences of the hydrogen-bond network of nonaqueous biphasic solvent on the absorption, phase splitting and desorption