Abstract:Scour of pile group foundations is a common hazard for cross-river bridges and can produce considerable damage to piles in earthquake-prone regions. The fragility-based performance assessment for pile group supported bridges subjected to earthquake and scour hazards has drawn increasing attention from engineering practice and academic communities. Such assessment requires numerical models that are computationally efficient and accurate in describing the mechanical behavior associated with the complex soil-pile interaction of these soil-bridge systems. Additionally, selecting an optimal ground motion intensity measure (IM) is generally required for such assessments. However, modeling the pile group effect for seismically excited pile groups and the optimal IM for the scoured bridges have not been well addressed in previous related studies. To this end, a practical pile group effect modeling approach is adopted in this study and validated by a set of shake table tests on scoured pile group bridge available in the literature. Based on the validated numerical modeling approach for the soil pile interaction, a series of coupled soil-bridge models are generated considering the structural and soil parameter uncertainty and analyzed in the OpenSees platform. The optimal IM for various engineering demand parameters (EDPs) is identified from thirty-nine scalar IM candidates through the criteria of efficiency, practicality, sufficiency, and hazard computability. Finally, a straightforward form of probabilistic seismic demand model (PSDM), incorporating the effect of scour depth changes, is developed for pile group supported bridges. Results show that the increase of scour depth significantly increases the curvature demand of a pile group and statistically reduces the embedded depth of the belowground plastic hinge of the pile shaft. The rank of optimal IM candidates directly depends on the selection criteria of an optimal IM and the selection of EDP. In addition, the scour depth slightly affects the rank of optimal IMs. Generally, VSI , PGV, and S v ,1.0 are recommended for the probabilistic seismic demand analysis of pile group supported bridges in sandy soils with scour potentials.

Quantifying Easy-to-Repair Displacement Ductility and Lateral Strength of Scoured Bridge Pile Group Foundations in Cohesionless Soils: A Classification–Regression Combination Surrogate Model

Machine Learning-based Seismic Fragility Curves for RC Bridge Piers

A Parametric Investigation on Ultra-low Cycle Fatigue Damage of Steel Bridge Piers under Horizontal Bi-directional Seismic Excitations

Ultra-low Cycle Fatigue Evaluation Method for Unstiffened Steel Piers Using Fiber Model

Large Deformation Analysis of Intermittent Pile Penetration into Dense Sand Incorporating a State Dependent Mohr–Coulomb Model

Study on Ultra‐low Cycle Fatigue Fracture of Thick‐walled Steel Bridge Piers

Ductile Behavior of Scoured RC Pile-Group Foundations for Bridges in Cohesionless Soils: Parametric Incremental Dynamic Analysis

Effectiveness of CFRP Seismic-Retrofit of Circular RC Bridge Piers under Vehicular Lateral Impact Loading

Analysis of stress and failure mechanism on composite foundation improved by rigid piles under flexible foundation considering damage of piles

Seismic uplift behavior and energy dissipation mechanism of scoured bridge pile-group foundations: Quasi-static test and numerical analysis

Numerical analysis on the performance of a cushioned foundation with a mixture of both rigid and flexible piles

Optimal intensity measure selection and probabilistic seismic demand model of pile group supported bridges in sandy soil considering variable scour effects

Displacement and Force Analyses of Piles in the Pile-Caisson Composite Structure under Eccentric Inclined Loading Considering Different Stratum Features

Probabilistic curvature limit states of corroded circular RC bridge columns: Data-driven models and application to lifetime seismic fragility analyses

Seismic fragility assessment framework for highway bridges based on an improved uniform design-response surface model methodology

Seismic resilience assessment of extended pile shaft supported coastal bridges considering scour and uniform corrosion effects

Numerical failure analysis of a continuous reinforced concrete bridge under strong earthquakes using multi-scale models

Weakened section detailing for scoured/elevated pile groups in sands toward post-earthquake resilient behavior: Quasi-static tests

Lateral Cyclic Response Sensitivity of Rectangular Bridge Piers Confined with UHPFRC Tube Using Fractional Factorial Design

3D Dynamic Analysis of the Soil–foundation–superstructure System Considering the Elastoplastic Finite Deformation of Both the Soil and the Superstructure

A holistic framework for seismic analysis of extended pile-shaft-supported bridges against different extents of liquefaction and lateral spreading