Abstract:Wastewater pollution has a detrimental impact on the environment, including harming aquatic ecosystems, causing eutrophication, and posing risks to human health. Existing catalysts commonly used for pollutant degradation in wastewater can demonstrate a low percent degradation of pollutants within certain time periods, have long reaction times, only work under limited conditions, work on a large or small scale, or possess a combination of these limitations. In recent advances, some piezoelectric materials and certain paraelectric materials have been shown to have catalytic activity in degrading pollutants. Lead zirconate (piezoelectric) and strontium titanate (paraelectric) are examples of materials that possess these properties. The purpose of this study was to utilize multiple piezoelectric materials and other catalysts with favorable properties, such as lead zirconate and strontium titanate, to develop a novel catalyst to degrade pollutants in wastewater. In the experiment, catalysts were created by mixing various ratios of lead zirconate, strontium titanate, and titanium dioxide powders–the latter being the currently most used photocatalyst for wastewater purification. These catalysts were added to four different wastewater samples obtained from different sources: three were industrial wastewater samples containing inorganic and organic pollutants with one sample being mixed with dye pollutants in addition. The other wastewater sample was a lab-created solution of methylene blue and water. Each sample of wastewater and catalyst mixed together was subjected to controlled conditions and specified durations of visible and UV light exposure. Spectroscopy was used to analyze the effectiveness of the different catalysts. The absorption of each mixture of wastewater and catalyst was recorded at both the beginning and end of the reaction period and compared, and the percent difference in absorption at peak length between the beginning and end of the reaction period was used to calculate the photodegradation efficiency. The catalyst that was created using a 1:1 ratio of strontium titanate to lead zirconate sample had a 19.57% greater percent degradation efficiency compared to the traditionally used catalyst (titanium dioxide) when both were used on the third industrial wastewater sample under the study’s experimental conditions. A higher percent degradation efficiency signifies a greater a reduction in the initial pollutants. This decrease could potentially signify the breakdown of pollutants into smaller particles, which may be less harmful. The findings in this study underscore the potential of the catalyst, strontium titanate and lead zirconate in a 1:1 ratio, for the use of wastewater treatment and hence to protect the environment from wastewater pollution, possibly with a higher percent degradation efficiency than the currently used catalyst for this application.

What problem does this paper attempt to address?

The paper aims to address the issues of low efficiency, long reaction time, or limited conditions in existing wastewater treatment catalysts. The researchers explored the potential of piezoelectric materials (such as lead zirconate) and dielectric materials (such as strontium titanium) in photocatalytic degradation of wastewater pollutants. They prepared new catalysts by mixing different proportions of lead zirconate, strontium titanium, and titanium dioxide powder, and conducted experiments on four different sources of wastewater samples, including industrial wastewater and dye-containing wastewater. The results showed that the degradation efficiency of the third type of industrial wastewater sample was improved by 19.57% with a 1:1 ratio mixture of strontium titanium and lead zirconate compared to traditional titanium dioxide catalyst under specific conditions. This new catalyst may contribute to improving the efficiency of wastewater treatment and reducing environmental pollution.

Novel Optimization of Photocatalytic Degradation of Wastewater Pollutants Using Piezoelectric and Paraelectric Materials

Waste Water Treatment Using Piezoelectric Materials: A Review on Piezo-photocatalysis

Low-frequency porous composite foam catalyst for efficient dye wastewater degradation via coupling photoelectric and piezoelectric effects

Ultrasonic-Driven Degradation of Organic Pollutants Using Piezoelectric Catalysts WS2/Bi2WO6 Heterojunction Composites

Water flow promoted charge separation in piezoelectric Bi4Ti3O12 for the enhanced photocatalytic degradation of antibiotic

Piezoelectric materials for catalytic/photocatalytic removal of pollutants: Recent advances and outlook

Piezoelectric materials for pollutants degradation: State-of-the-art accomplishments and prospects

Piezoelectric polarization coupled with photoinduced catalytic oxidation technology for environmental pollution control: Recent advances and future prospects

A coupled photo-piezo-catalytic effect in a BST-PDMS porous foam for enhanced dye wastewater degradation

Application of catalytic technology based on the piezoelectric effect in wastewater purification

Recent advances of piezo‐catalysis and photocatalysis for efficient environmental remediation

Photocatalytic Degradation of Pollutants Using Advanced Ceramics: Materials, Mechanism, Synthesis, and Applications

Efficient piezo-photocatalysis of 0D/2D α-Fe2O3/Bi2WO6: Synergy of weak force-driven piezoelectric polarization and Z-scheme junction

Wastewater decontamination via piezoelectric based technologies: Materials design, applications and prospects

The photocatalytic process in the treatment of polluted water

A Review on Photocatalysis Used For Wastewater Treatment: Dye Degradation

Wastewater treatment with the advent of TiO2 endowed photocatalysts and their reaction kinetics with scavenger effect

ZrO2-Based Photocatalysts for Wastewater Treatment: From Novel Modification Strategies to Mechanistic Insights

Piezoelectric effect enhanced photocatalysis in environmental remediation: State-of-the-art techniques and future scenarios

The photocatalytic wastewater hydrogen production process with superior performance to the overall water splitting

Enhanced piezo-photocatalysis in Bi0.5Na0.5TiO3@Ag composite to efficiently degrade multiple organic pollutants