Abstract:In this work, a series of Zn-doped Pd/MoC catalysts with different Zn loadings were prepared and employed for the hydrogen production from methanol steam reforming (MSR) at low temperature. The catalysts prepared in this study were fully analyzed by different characterization technologies. The results showed that the addition of small amounts of Zn to Pd/MoC catalyst favored the formation of α -MoC 1- x phase and raised the Pd dispersion on the surface of MoC, which led to increased catalytic activity (in terms of methanol conversion and H 2 production rate) for MSR. By comparison, the ZnPd/MoC catalysts with high contents of Zn exhibited poor hydrogen production activity at the same reaction conditions. This could be attributed to the fact that the introduction of high contents of Zn into Pd/MoC catalyst decreased the formation of α -MoC 1- x phase and weakened the interaction between Pd particles and MoC. However, the ZnPd/MoC catalysts with high contents of Zn showed lower CO selectivity, attributable to the existence of more Pd-Zn alloy. The optimal 0.5ZnPd/MoC catalyst possessed the best catalytic activity for MSR at 160 °C. In addition, despite deactivation at the initial stage of reaction, the 0.5ZnPd/MoC catalyst exhibited a stable catalytic activity at 160 and 240 °C during 170 h of continuous running. From the results, this study provides a way to the rational design of catalysts with high activity and selectivity for MSR at low temperature.

ZnO-supported Palladium Catalysts Via Ball Milling As an Effective Heterogeneous Catalyst for Methanol Steam Reforming

Highly Active Nanoporous Pt-based Alloy As Anode and Cathode Catalyst for Direct Methanol Fuel Cells

An Innovative Micro-Channel Catalyst Support with a Micro-Porous Surface for Hydrogen Production Via Methanol Steam Reforming

Antioxidative and Stable PdZn/ZnO/Al2O3 Catalyst Coatings Concerning Methanol Steam Reforming for Fuel Cell-Powered Vehicles

A High-Performance PdZn Alloy Catalyst Obtained from Metal-Organic Framework for Methanol Steam Reforming Hydrogen Production

Oxidizing- and sintering- resistant PdZn@ZnO catalyst concerning methanol steam reforming for on-board hydrogen production for fuel cell vehicles

Supported platinum–zinc oxide core–shell nanoparticle catalysts for methanol steam reforming

Theoretical Study of the Mechanism of Methanol Steam Reforming over Pd/ZnO

Highly selective PdZn/ZnO catalysts for the methanol steam reforming reaction

Theoretical Study Of The Reaction Mechanisms Of Methanol Steam Reforming On Pdzn(111)

Methanol Steam Reforming over ZnO/ZnZrOx: Performance Enhanced with a Cooperative Effect

A Novel Structured PdZnAl/Cu Fiber Catalyst for Methanol Steam Reforming in Microreactor

ZnFexAl2-xO4 spinel supported PdZnβ bifunctional catalyst for methanol steam reforming

Precisely Deposited Pd on ZnO (002) Facets Derived from Complex Reduction Strategy for Methanol Steam Reforming

High-performance Cu/ZnO/Al2O3 catalysts for methanol steam reforming with enhanced Cu-ZnO synergy effect via magnesium assisted strategy

Cu/ZrO2 Catalysts for Methanol Steam Reforming

In-situ Self-Assembled Cu2O/ZnO Core-Shell Catalysts Synergistically Enhance the Durability of Methanol Steam Reforming

Mechanistic Insights into Methanol Steam Reforming over a ZnZr Oxide Catalyst with Improved Activity

ZnAl2O4 Spinel-Supported PdZnβ Catalyst with Parts Per Million Pd for Methanol Steam Reforming

Promoting Effect of Zn on Pd/MoC Catalyst for the Hydrogen Production From Methanol Steam Reforming

ZnAl 2 O 4 Spinel-Supported PdZn β Catalyst with Parts per Million Pd for Methanol Steam Reforming