Abstract:CO adsorption—as a molecular probe—was studied by transmission IR spectroscopy on pre-reduced Pd and bimetallic PdZn nanoparticles. Palladium was supported (2 wt% Pd) on pure CeO2, ZnO and a ZnO–CeO2 composite (atomic ratio Zn:Ce = 1:2). The Pd 3d5/2 binding energy shift, together with the formation of metallic zinc were consistent with the development of a PdZn alloy over the zinc-containing supports at increasing reduction temperature, as revealed by XPS. Following H2 reduction at 623 K the bimetallic particles showed only linear CO adsorption (COL) at initial contact time (10 Torr CO, 298 K), giving rise to a convoluted IR band ascribed to different Pd sites, where it was assumed that the Pd–Pd distances were larger than for pure Pd crystallites, indicating the presence of a PdZn alloyed surface. However, for longer exposure time to CO and/or higher superimposed pressure, the appearance of bridge and hollow coordinated CO (COB and COH, respectively) on the Pd sites suggested the degradation of the PdZn surface alloy, most likely due to the segregation of Pd surface patches. The temperature-programmed, dynamic isobaric adsorption of CO (TPA-CO), under flowing CO(1%)/He on the catalysts pre-reduced at 623 K (that is, for similar conditions to those found in the methanol steam reforming—MSR-process) showed faster desorption of COL as compared to COB + COH species for supported Pd/CeO2, as expected. However, the TPA-CO results on Pd/ZnO–CeO2 were atypical: even under the superimposed, low CO partial pressure, and for a temperature range similar to those found at high methanol conversion in the MSR reaction, the PdZn bimetallic surface nature was recovered, which could be an explanation of the good selectivity to CO2 of Pd/ZnO-based catalysts and—in particular—of the catalytically stable Pd/ZnO–CeO2 materials.Graphical Abstract

ZnAl2O4 Spinel-Supported PdZnβ Catalyst with Parts Per Million Pd for Methanol Steam Reforming

ZnAl 2 O 4 Spinel-Supported PdZn β Catalyst with Parts per Million Pd for Methanol Steam Reforming

Methanol Synthesis from CO 2 and H 2 over Pd/ZnO/Al 2 O 3 : Catalyst Structure Dependence of Methanol Selectivity

ZnFexAl2-xO4 spinel supported PdZnβ bifunctional catalyst for methanol steam reforming

Pdzn Alloy Nanoparticles Epitaxial Growth on Zno Nanowires for Methanol Steam Reforming

A High-Performance PdZn Alloy Catalyst Obtained from Metal-Organic Framework for Methanol Steam Reforming Hydrogen Production

The Critical Role of βPdZn Alloy in Pd/ZnO Catalysts for the Hydrogenation of Carbon Dioxide to Methanol

Microscopic Models of PdZn Alloy Catalysts: Structure and Reactivity in Methanol Decomposition.

ZnO-supported Palladium Catalysts Via Ball Milling As an Effective Heterogeneous Catalyst for Methanol Steam Reforming

PdZn Surface Alloys as Models of Methanol Steam Reforming Catalysts: Molecular Studies by LEED, XPS, TPD and PM-IRAS

Supported platinum–zinc oxide core–shell nanoparticle catalysts for methanol steam reforming

Highly selective PdZn/ZnO catalysts for the methanol steam reforming reaction

CO 2 Hydrogenation to Methanol over PdZnZr Solid Solution: Effects of the PdZn Alloy and Oxygen Vacancy

ZnCo2O4 Supported Low-Loading Pd As an Enhanced Catalyst for Low Temperature Oxidation of Carbon Monoxide

On the Surface Nature of Bimetallic PdZn Particles Supported on a ZnO–CeO2 Nanocomposite for the Methanol Steam Reforming Reaction

Highly dispersed Pd nanoparticles supported on dendritic mesoporous CeZrZnOx for efficient CO2 hydrogenation to methanol

Pd/ZnO catalysts for direct CO2 hydrogenation to methanol

Atomic Pd-promoted ZnZrO Solid Solution Catalyst for CO2 Hydrogenation to Methanol

Stabilization of Pd0 by Cu Alloying: Theory‐Guided Design of Pd3Cu Electrocatalyst for Anodic Methanol Carbonylation

A Novel Structured PdZnAl/Cu Fiber Catalyst for Methanol Steam Reforming in Microreactor

Density Functional And Slab Model Studies Of The Structure Of Pd/Zno Catalyst Active To Methanol Steam Reforming