Abstract:In recent years, the performance research of perovskite materials is not only concentrated in the field of solar cells or optics, but the field of gas sensing has gradually entered the public view. However, the detection of nitric oxide (NO) by lead-free halide perovskites has not yet been reported. Herein, we use Cs2PtI6 to realize the first example of a halide perovskite applied to NO sensing. Due to favoring Pt–N binding, the material has some excellent properties such as a NO detection limit as low as 100 parts-per-billion (ppb), ultrahigh selectivity to NO, and can work at room temperature for more than 2 months. In situ sum frequency generation (SFG) spectra and crystal orbital Hamilton population (COHP) analysis reveal that the strong bonding interaction between Pt 5s and N 2s ensure the high adsorption energy, and Pt 5d electron back donation to N 2px, N 2pz antibonding causes the conductive change of the sensors. In addition, its flexible wearable technology shows the application potential of the device and promotes the further development of perovskite materials.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acssensors.1c01791.Comparison of performance for some recent reported metal oxide semiconductors nitric oxide sensors of different types (Table S1); EDX mapping images of a Cs2PtI6 octahedron (Figure S1); low-magnification SEM figure of the electrodes where the material is deposited on them (Figure S2); SAED pattern and thermogravimetric analysis curve of Cs2PtI6 octahedrons (Figure S3); photograph of the sensor device and the thickness of the sensor film (Figure S4); gas sensor test system (Figure S5); temporal responses with increasing NO concentrations in the range of 100 ppb–10 ppm (Figure S6); influence of different temperatures on curve recovery (Figure S7); SEM images with EDS stoichiometry and the XRD pattern of pristine Cs2PtI6 and treated NO (Figure S8); repeatability of the sensor based on Cs2PtI6 toward 500 ppb, 1 ppm, 4 ppm, and 10 ppm NO (Figure S9); effect of environmental temperature to the sensor based on Cs2PtI6 with 10 ppm NO (Figure S10); effect of different relative humidities to the sensor based on Cs2PtI6 with 1, 2, 4, and 8 ppm NO (Figure S11); effect of light intensity to the sensor based on Cs2PtI6 with 400 ppb, 600 ppb, 800 ppb, and 1 ppm NO (Figure S12); the charge distribution and the O–Pt bond length of NO adsorbed on the surface of Cs2PtI6 (Figure S13); flexibility and stability of the Cs2PtI6 sensor (Figure S14); flexibility when the wrist is naturally bent downward to different degrees (Figure S15); flexibility when the wrist is naturally bent upward with different degrees (Figure S16); and schematic illustration of the preparation of the NO sensor device (Figure S17) (PDF)This article has not yet been cited by other publications.

Monolayer PtTe2: A promising candidate for NO2 sensor with ultrahigh sensitivity and selectivity

Janus PtSTe monolayer as a modulable and outstanding gas sensing buddy

A Reusable and High Sensitivity Nitrogen Dioxide Sensor Based on Monolayer SnSe

2D-GeP3 as an exemplary prospect for NO sensing: unveiling highly sensitive and selective at room temperature

A DFT study of superior adsorbate-surface bonding at Pt-WSe2 vertically aligned heterostructures upon NO2, SO2, CO2, and H2 interactions

First-Principles Calculations of Two-Dimensional Monolayer PdSe 2 for Selective Sensing of Nitrogen-Containing Gases

Monolayer B3C2P3: A promising candidate as N-containing gases sensor and/or capturer with high Sensitivity, selectivity and reversibility

B3C2P3 monolayers based highly sensitive and selective room-temperature gas sensors for reusable NO and NO2 detection

A First-Principles Study of the Adsorption Mechanism of NO2 on Monolayer Antimonide Phosphide: a Highly Sensitive and Selective Gas Sensor

Adsorption of NO2 and NH3 on single-atom (Co, Pd, Pt)-decorated 2H-MoS2 monolayer: A DFT study

Lead-Free Halide Cs 2 PtI 6 Perovskite Favoring Pt–N Bonding for Trace NO Detection

Pristine and Ag decorated In2O3 (110): A gas-sensitive material to selective detect NO2 based on DFT study

Temperature‐Modulated Selective Detection of Part‐per‐Trillion NO2 Using Platinum Nanocluster Sensitized 3D Metal Oxide Nanotube Arrays

Layered Heterostructure of Graphene and TiO2 as a Highly Sensitive and Stable Photoassisted NO2 Sensor

Pt nanoparticle-functionalized Fe2(MoO4)3 hollow microspheres for parts-per-billion NO2 sensors operated at 80 °C

Adsorption Kinetics of NO2 Gas on Pt/Cr-TiO2/Pt-Based Sensors

Sensing behavior of pentagonal two-dimensional noble-metal dichalcogenide PdSeS for NO 2 gas: DFT and semiclassical studies

Mesoporous and Encapsulated In2O3/Ti3C2Tx Schottky Heterojunctions for Rapid and Ppb-Level NO2 Detection at Room Temperature.

Density Functional Theory Insight Towards High Sensitivity for NO, NO2 and O2 over Monolayer SnO

First-Principles Study on Bi2Te2S Monolayer for Adsorption Performance and Sensing Capability

Highly Sensitive, Selective and Stable NO2 Gas Sensors with a Ppb-Level Detection Limit on 2D-Platinum Diselenide Films