Abstract:Cold spray is a rapidly developing coating technology for depositing materials in the solid state. In this deposition process, the spray particles are accelerated to a high velocity by a high-speed gas flow, and then form a dense and high quality coating due to plastic deformation of particles impinged upon the solid surface of substrate. 2D and 3D modelling of particle impacting behaviours in cold spray deposition process by using ABAQUS/Explicit was conducted for four couples of materials (i.e. impacting particle/impacted substrate): copper/aluminium, aluminium/copper, copper/copper, and aluminium/aluminium. A systematic analysis of a single impact was carried out considering different parameters, such as the initial impact velocity, initial temperature and contact angle, which affect the deposition process and subsequently the mechanical properties of coating. Three numerical methods have been evaluated and their performances are discussed for various simulation settings: (i) modelling in a Lagrangian reference frame; (ii) modelling using adaptive remeshing in an Arbitrary Lagrangian Eulerian (ALE) reference frame; and (iii), modelling in a CEL reference frame. It is found that the Coupled Eulerian Lagrangian (CEL) method has more advantages to simulate the large deformation of materials, and is also more efficient to prevent the excessive distortion of the mesh. A comparison between simulation results and experimental data from the literature was performed. Nevertheless, the CEL method is implicitly isothermal for ABAQUS v6.10, whereas the modelling in the classical Lagrangian reference frame does include coupled thermo-mechanical effects with a local increase of the temperature near the interface — due to friction — and for the highly plastically deformed elements — due to the heat dissipation linked to plasticity. A local rise of temperature at the impact surface may also be observed for oblique impacts. Finally a first attempt to simulate the deposition of several particles is made with a 3D CEL model, resulting in the creation of porosity at the interface between particles.

Improving Inter-Particle Deformation and Bonding by Preserving Transient In-Situ Deposition Temperatures During Cold Spray

Particle-based Simulation of Cold Spray: Influence of Oxide Layer on Impact Process

Capturing cold-spray bonding features of pure Cu from in situ deformation behavior using a high-accuracy material model

Cold-Spray Bonding Mechanisms and Deposition Efficiency Prediction for Particle/Substrate with Distinct Deformability

Effect of particle oxidation, size and material on deformation, bonding and deposition during cold spray: a peridynamic investigation

Bonding Processes of Particles and Substrate in the Cold Spray Technology to Transform Material Property

Simulation of the Cold Spray Particle Deposition Process

Establishing a Cold Spray Particle Deposition Window on Polymer Substrate

Thermal effect of high-velocity particle impingements on coating quality in cold gas dynamic spray operations

Effect of In-situ Softening on the Deposition Behavior of Particles by Controlling Gas Stream Traversing During Cold Spraying

Research Progress on Numerical Simulation of the Deposition and Deformation Behavior of Cold Spray Particles

High velocity impact induced microstructure evolution during deposition of cold spray coatings: A review

Molecular Dynamics Simulation of the Influence Factors of Particle Depositing on Surface During Cold Spray

Post-Process Treatments on Supersonic Cold Sprayed Coatings: A Review

Microstructure and Properties Tailoring of Cold Sprayed Metals

Development of the Particle Interface Bonding in Thermal Spray Coatings for Expanding High Performance Applications

Deposition Behavior of Thermally Softened Copper Particles in Cold Spraying

Deposit shape control for local repair and welding by cold spray

Effect of Substrate Temperature on Interfacial Bonding for Cold Spray of Ni Onto Cu

Improving the adhesion of cold sprayed Al deposits through in-situ micro-forging

Investigation of Dynamic Contact Between Cold Spray Particles and Substrate Based on 2D SPH Method