Abstract:Lithium-ion batteries degrade over time, based on their usage and these changes can be observed in the terminal voltage and cell expansion curves with respect to SOC. Physics-based battery models augmented with degradation modes can describe the changes in battery electrical and mechanical response as the battery ages and can be tuned to predict the observed rate of change. Tuning these models is computationally intensive, because it requires multiple simulations of the battery aging process over the entire lifetime. Accelerated simulations that use an adaptive inter-cycle extrapolation algorithm [1] can reduce simulation time and thus enable use of optimization algorithms to automatically tune degradation models [2]. In this work, we investigate how the amount of aging data used to train the model impacts the prediction of future battery aging assuming the battery continues to operate under the same conditions. The electrode-specific state of health (eSOH) parameters are computed from the reference performance testing performed at periodic intervals throughout the battery's lifetime. These four parameters include the capacities of positive and negative electrodes C p and C n , and the corresponding electrode stoichiometric windows y 0 and x 100 . These 4 parameters extracted from a cell aged at C/5 constant current charging rate were used for training the model. The aging model includes SEI growth in the negative electrodes which causes a loss of cyclable lithium/loss of lithium inventory (LLI) and loss of electrode active material (LAM) due to particle cracking at both the negative and positive electrodes. Simulation results show us that a shorter training window of three eSOH reference points (every 25 cycles) over (Cycles 41 to 98) over-predicts battery degradation because the rate of degradation during these initial cycles is larger than the degradation which happens later in the battery's life. The battery degradation parameters that are predicted (and shown in the figure) include battery capacity, maximum reversible swelling in the battery, loss of active material in the negative electrode and loss of lithium inventory. If we increase the model training window to five eSOH data points (Cycles 41 to 175), the prediction of battery degradation is much better because the model now accounts for both the initial higher rate of degradation and subsequent lower rate of degradation. References: V Sulzer et al. Accelerated Battery Lifetime Simulations Using Adaptive Inter-Cycle Extrapolation Algorithm, Journal of Electrochemical Society (2021) S. Pannala et al. Methodology for Accelerated Inter-Cycle Simulations of Li-ion Battery Degradation with Intra-Cycle Resolved Degradation Mechanisms, American Controls Conference (2022) Figure 1

A Pragmatic Model to Predict Future Device Aging

Modeling and Predicting Transistor Aging under Workload Dependency using Machine Learning

A Device-Circuit Aging Simulation Framework Integrating Trap-Based Models and Sensitivity Analysis for FinFET Technology

Compact Modeling and Simulation of Accelerated Circuit Aging

Implementation of Aging Mechanism Analysis and Prediction for XILINX 7-Series FPGAs with a 28-nm Process

Predictive As-grown-generation Model for NBTI of Advanced CMOS Devices and Circuits

Predicting Battery Aging Trajectory via a Migrated Aging Model and Bayesian Monte Carlo Method

Theory of battery ageing in a lithium-ion battery: Capacity fade, nonlinear ageing and lifetime prediction

Combining a Data Driven and Mechanistic Model to Predict Capacity and Potential‐Curve Degradation

The As-Grown-Generation (ag) Model: A Reliable Model for Reliability Prediction under Real Use Conditions

Knee-Point-Conscious Battery Aging Trajectory Prediction Based on Physics-Guided Machine Learning

Impact of Data Window on Prediction of Battery Aging and Swelling

Cerberus: A Deep Learning Hybrid Model for Lithium-Ion Battery Aging Estimation and Prediction Based on Relaxation Voltage Curves

Machine-Learning Assisted Identification of Accurate Battery Lifetime Models with Uncertainty

Aging-Aware Gate-Level Modeling for Circuit Reliability Analysis

Predicting Battery Lifetime Under Varying Usage Conditions from Early Aging Data

Data-Driven Battery Aging Mechanism Analysis and Degradation Pathway Prediction

Physics-Informed Machine Learning for Battery Degradation Diagnostics: A Comparison of State-of-the-Art Methods

Prognosis of Li-ion Batteries Under Large Load Variations Using Hybrid Physics-Informed Neural Networks

New Insight into the Aging Induced Retention Time Degraded of Advanced DRAM Technology

A Semi Empirical Approach to a Physically Based Aging Model for Home Energy Management Systems