Abstract:We present a battery lifetime model that predicts Irreversible battery thickness change under constant pressure operation as the battery ages, along with capacity loss and resistance growth. These metrics are very important for predicting lithium-ion battery state of health (SOH) and remaining useful life due to their interdependence with battery packaging and safety. To design and operate battery storage systems safely, we must be able to predict and detect changes in all three SOH metrics over life accurately and simultaneously. Traditionally, these three SOH metrics have been modeled separately. However, we developed a single model that simultaneously predicts battery capacity, resistance, and expansion over its lifetime. In this work, battery degradation is modeled using the single particle model (SPM) framework, including mechanical damage in the electrodes, which results in loss of active material (LAM), and the side reactions for SEI growth and Li plating, which result in loss of lithium inventory (LLI). We introduce an equivalent stress and concentration dependence of stress to the mechanical damage model. Commonly used fatigue models assume symmetric cycles (zero-mean stress) [1]. To account for cycling conditions with different currents on charge and discharge, an equivalent stress that adjusts for non-zero mean stress is needed. The concentration dependency of strain and the resulting stress allows us to capture different degradation rates for cells cycled at different depths of discharge (DOD). Lithium plating at the separator interface is often described as a spatially non-uniform process using the pseudo-2D (P2D) model. This phenomenon can be captured in the SPM framework using a current-dependent dynamic term to account for spatial-nonuniformity of electrolyte dynamics at higher currents. Experimental data from cells cycling with periodic reference performance tests were used to tune the degradation model. In addition to the standard I, V, and T measurements, continuous measurements of the thickness change of the battery pouch cells were recorded. From this data, we extracted the capacity, electrode state of health (eSOH), resistance, and reversible and irreversible expansion. The test conditions were designed to excite different dominant degradation mechanisms (e.g. mechanical damage) by cycling the cells at different conditions (C-rate, temperature, preload pressure, and DOD). The tuning, which uses accelerated aging simulations [2] (to speed up the tuning process), results in a single set of parameters that predicts capacity loss, resistance growth, and irreversible thickness change as the battery ages, even for conditions that were not used for parameter tuning. The tuning is performed in two sequential steps. First, the parameters related to the electrochemical and mechanical degradation rates, which result in LLI and LAM, are tuned to match the extracted eSOH variables at each Reference Performance Test (RPT). The first tuning gives us the amount of plated Li, SEI growth, and mechanical damage in the particles. We then relate these quantities to irreversible expansion using a linear relationship in the case of SEI and mechanical damage and quadratic in the case of Li plating [3]. The same relationship is used for all cells, and this represents the 2nd tuning step. Our data set and calibration are unique in that the dominant degradation mode is the loss of lithium inventory due to the loss of active anode material. Most prior work on lifetime predictive models relied on SEI growth as the dominant degradation mode. Figure 2 shows the tuned model prediction of the three performance metrics over the cycle life of cells for various cycling conditions. The markers represent the measurement at each reference performance test, and the lines correspond to the model. References: [1] R. Burger and Y.-L. Lee, “Assessment of the mean-stress sensitivity factor method in stress-life fatigue predictions,” Journal of Testing and Evaluation , 2013 [2] S. Pannala et al. Methodology for Accelerated Inter-Cycle Simulations of Li-ion Battery Degradation with Intra-Cycle Resolved Degradation Mechanisms, American Controls Conferenc e, 2022 [3] S. Pannala et al. Consistently Tuned Battery Lifetime Predictive Model of Capacity Loss, Resistance Increase, and Irreversible Thickness Growth, Journal of the Electrochemical Society , 2023 Figure 1

Combining a Data Driven and Mechanistic Model to Predict Capacity and Potential‐Curve Degradation

Comprehensive Aging Model Coupling Chemical and Mechanical Degradation Mechanisms for NCM/C6-Si Lithium-Ion Batteries

A Physics-Informed Hybrid Multitask Learning for Lithium-Ion Battery Full-Life Aging Estimation at Early Lifetime

Integrating Physics-Based Modeling and Machine Learning for Degradation Diagnostics of Lithium-Ion Batteries

Modeling and Analysis of Coupled Thermal and Mechanical Capacity Degradation in Silicon-Based Lithium-Ion Batteries

Data-Driven Battery Aging Mechanism Analysis and Degradation Pathway Prediction

A Physics-Informed Hybrid Data-Driven Approach with Generative Electrode-Level Features for Lithium-Ion Battery Health Prognostics

Degradation model and cycle life prediction for lithium-ion battery used in hybrid energy storage system

A Dynamic Capacity Degradation Model and Its Applications Considering Varying Load for A Large Format Li-Ion Battery

A practical semi-empirical model for predicting the SoH of lithium-ion battery: A novel perspective on short-term rest

A Hybrid Battery Degradation Model Combining Arrhenius Equation and Neural Network for Capacity Prediction under Time-varying Operating Conditions

Prognosis of Li-ion Batteries Under Large Load Variations Using Hybrid Physics-Informed Neural Networks

(Invited) Lifetime Predictive Model of Capacity Loss, Resistance Increase, and Irreversible Thickness Growth

Capacity Degradation Assessment of Lithium-Ion Battery Considering Coupling Effects of Calendar and Cycling Aging

Theory of battery ageing in a lithium-ion battery: Capacity fade, nonlinear ageing and lifetime prediction

Modelling Lithium-Ion Battery Ageing in Electric Vehicle Applications—Calendar and Cycling Ageing Combination Effects

A Data-Driven Modeling Framework for Lithium Metal Battery Health Estimation

Lithium-ion battery degradation: using degradation mode analysis to validate lifetime prediction modelling

Physics-Informed Machine

An Identifiability Study of Lithium-Ion Battery Capacity Fade Using an Electrode-Specific Cell OCV Model

A semi-empirical model of the calendar ageing of lithium-ion batteries aimed at automotive and deep-space applications