Abstract:The calculation of main circuit parameters is an important constituent part in the design of HVDC transmission projects. Each pole of the ±800 kV 7 500 MW DC power transmission project from Xiluodu to Zhexi is composed of two sieries connected 12-pulse converters, thus the operation modes of the DC transmission project can be flexibly regulated. According to the theory of UHVDC power transmission and the features of DC system, main circuit parameters of the DC transmission project is studied and designed. Following main design parameters of converter stations at both ends of the DC transmission project are obtained from the calculation results： inductance of smoothing reactor for each pole of each station is 4×75 mH, this 4×75mH inductance is splitted into two equal parts, one part is connected to pole bus and the other is connected to neutral bus; the converter transformers are composed of single-phase two-winding tranformers, at Xiluodu side the rated capacity of each single-phase tranformer is 378.5 MVA and its rated phase voltage is 171.3 kV and at Zhexi side the rated capacity of each single-phase tranformer is 358.4 MVA and its rated phase voltage is 162.2 kV, the short-circuit impedances of converter transfomer are 19% for both ends of the project while the tap changer is not adjusted; the number of transformer taps is set to ＋21/-6 at Xfluodu side and ＋24/-4 at Zhexi side, and voltage difference between two adjacent taps is 1.25% of the rated votlage at both sides; the absolute maximum no-load DC votlage 239.0 kV at Xiluodu side and 227.0 kV at Zhexi side. These data can be used as the foundation for subsequent research item of this project and is available for reference to other UHVDC transmission projects.

Control Scheme of ±800kv/10000mw HVDC Transmission System for Large-Scale Renewable Energy Bases in Gobi Areas

A study on monitoring technology for multi-terminal ±500kV VSC-HVDC power transmission system

A Hybrid HVDC Topology Suitable for Large-Scale Pure Clean Energy Power Base Transmission

Novel Topology and Control Strategy of HVDC Grid Connection for Open Winding PMSG Based Wind Power Generation System

Control Strategy of Cascaded Multilevel Converter Based on Dual Active Bridge for Wind Energy Conversion System.

Research on an AC/DC networking and transmission scheme for large-scale onshore hydro-wind-solar integrated bases

Study and design of main circuit parameters for ±800 kv/7500 MW DC power transmission project from Xiluodu to Zhexi

Research on Topology and Control Strategy of DR-MMC Cascaded Hybrid HVDC Transmission System for Offshore Wind Power

A Novel Control Strategy For Offshore Dfig-Based Wind Farm Integrated Through Diode-Rectifier-Based Hvdc Transmission

Study and Design of Main Circuit Parameters for ±800 kV/7 500 MW DC Power Transmission Project From Xiluodu to Zhexi

Control and Modelling of Offshore Wind Farms Using High-Capacity Wind Generators and MMC-HVDC Transmission

Novel DC Grid Connection Topology and Control Strategy for DFIG-based Wind Power Generation System

Distributed Control System and Two-layer Voltage Balancing Method for Large-scale Modular Multilevel Converters

Cascaded H7 Current Source Converter Based Power Transmission System And Fault Analysis

HVDC Topology Structure Using Existing Ac Cable Lines for Integrating Renewable Energy Sources

Communication-Less Reactive Power Control of Grid-Forming Wind Turbines Connected to Cascaded LCC-DR HVDC System

Control of Multi-Terminal VSC-HVDC System to Integrate Large Offshore Wind Farms

Control of multi-terminal VSC-HVDC system based on V-I characteristics

Parallel Converter-Based Hybrid HVDC System for Integration and Delivery of Large-Scale Renewable Energy

Renewable energy transmission by HVDC across the continent: system challenges and opportunities

Hierarchical Coordinated Idea of Wind and Thermal Power Bundled Transmission System