Abstract:Aiming at the problem of large deformation and instability control of narrow coal pillar in the vertical stratification section of extra-thick coal seam, the stability and control technology of the surrounding rock of narrow coal pillar in extra-thick coal seam are studied by combining theoretical analysis, numerical simulation and field test. Based on the calculation of the triaxial stress in the narrow coal pillar, the yield criterion of the plane strain of the narrow coal pillar is obtained based on the Mohr-Coulomb failure strength, the failure characteristics and the evolution law of the damage degree of the narrow coal pillar are qualitatively analyzed, and the instability mechanism and size effect of the narrow coal pillar are further analyzed. Finally, the key technologies of surrounding rock control of the narrow coal pillar are given. It is verified by numerical simulation and field test. The research results show that ① The damage degree of the middle part of the narrow coal pillar is greater than that of the two sides, and the damage degree of the middle part from the top to the bottom develops from serious to slight. With the increase of width-height ratio, the damage degree and the proportion of serious damage area in the narrow coal pillar gradually decrease. When the width-height ratio is greater than 1∶1, a large range of slight damage area begins to appear in the middle and lower part of the narrow coal pillar. When the width-height ratio is greater than 5∶3, the proportion of slight damage area exceeds 50%. When C≥3 MPa, or φ≥20°, the damage degree of the two sides of the narrow coal pillar becomes slight. ② The side of the mining roadway in the working face is a low-stress bearing area of the narrow coal pillar. Under the action of high stress in the upper part, the coal body in the large-scale low-stress bearing area moves to the roadway, resulting in a continuous large deformation of the two sides, which in turn affects the stability of the roof. The height of coal pillar is the main controlling factor for the stability of the narrow coal pillar in the middle and bottom layered sections. The increase of width-height ratio of the narrow coal pillar has little influence on the bearing strength of high strength bearing area, while the bearing strength of low strength bearing area increases obviously. Reasonable width-height ratio of the narrow coal pillar can balance the proportion of high and low strength bearing area in coal pillar. ③ The stability of surrounding rock should be considered in the design of layered narrow coal pillars when both sides of the working face are mined out, so as to ensure that the range of high-strength bearing area inside the coal pillar is greater than half of the width and height of the coal pillar. Through the joint strengthening support measures, multiple joint control areas from shallow to deep are formed in the coal pillar to jointly maintain the self-stability of the coal pillar.

Study on the Mechanism of Coal Pillar Instability in Coal Seam Sections Containing Gangue

Study on instability mechanisms and control of coal pillar spalling and coal crumbs leakage during working face crossing faults

Numerical Study of Failure Mechanisms and Control Techniques for a Gob-Side Yield Pillar in the Sijiazhuang Coal Mine, China

Study on the Stability of Coal Pillars in a Gob-Side Two-Entry Arrangement of Different Layers in Fully Mechanized Caving and the Zonal Linkage Control of "Heteromorphic" Surrounding Rock

Instability failure mechanism of coal pillar in deep mine under dynamic disturbance

Physical Experiment and Numerical Modeling on the Failure Mechanism of Gob-Side Entry Driven in Thick Coal Seam

Stability analysis of 'roof-coal pillar' structure in longwall multi-section mining of steeply dipping coal seam

Study on the instability mechanism and control technology of narrow coal pillar in double-roadway layout of Changping mine

Analysis and control of the mechanism of coal pillar sloughing in the shallow buried thick coal seam

Study on Ultimate Strength and Dip Effect of Coal Pillar in Steeply Dipping Coal Seam

Study on the disaster caused by the linkage failure of the residual coal pillar and rock stratum during multiple coal seam mining: mechanism of progressive and dynamic failure

Study on the Instability Mechanism of Coal and Rock Mining under a Residual Coal Pillar in Gently Inclined Short-Distance Coal Seam with the Discrete Element

Optimization of small coal pillar width and control measures in gob-side entry excavation of thick coal seams

Exploration and Numerical Analysis of Failure Characteristic of Coal Pillar Under Great Mining Height Longwall Influence

Investigation on rational width of coal pillar and roadway support in isolated panel of extra-thick coal seam

Pressure Relief and Bolt Grouting Reinforcement and Width Optimization of Narrow Coal Pillar for Goaf-Side Entry Driving in Deep Thick Coal Seam: A Case Study

Field and Numerical Investigations of Gateroad System Failure under an Irregular Residual Coal Pillar in Close‐distance Coal Seams

Assessment of pillar stability and its control in a double roadway layout

Coal pillar failure analysis and instability evaluation methods: A short review and prospect

Study on small coal pillar in gob-side entry driving and control technology of the surrounding rock in a high-stress roadway

Stability and Control of Surrounding Rock of Narrow Coal Pillar in Vertical Stratification of Extra-Thick Coal Seam