Abstract:<p>Rolling element bearings are used as main supports and are key sources of vibrations for aero-engine rotor systems. Mainly including the inner and outer rings, cages, and balls or rollers, the complicated mechanical structures of rolling element bearings exhibit nonlinear behaviors due to the bearing clearance, nonlinear Hertzian contact forces, and defects. Due to imbalanced rotations, which are unavoidable, a wide variety of nonlinear behaviors can be expected in dual-rotor systems. Thus, in this study, we focus on the nonlinear behaviors of a dual-rotor system supported by a rolling element bearing. The nonlinear characteristics, such as the time-varying stiffness and primary resonance behaviors affected by the ball bearing parameters, are discussed. A dual-rotor system supported by a ball bearing was built while considering the nonlinear factors from the 4# ball bearing (at left end of the high-pressure rotor system). The nonlinear governing equations were established using the finite element method. Using the numerical methods, the effects of the bearing clearance on the time-varying stiffness and primary resonance behaviors are analyzed in detail. The results indicate that the mean values of the equivalent stiffness of the system and the rotation speed for forced resonance decrease as the clearance of the ball bearing increases. Periods of "zero-stiffness" occur when <span class="math"><math>Ω1</math></span> (the rotation speed of the high-pressure rotor system) is less than 800 rad/s, and the periods of "zero-stiffness" over one period grow as the bearing clearance is increased. Meanwhile, in the case of a small or even zero clearance of a ball bearing, the amplitude–frequency curves still exhibit "hard characteristics" in the forced resonance domain, and hysteresis and jump resonance occur. All of the results can be used to establish base-line behaviors for system status determination, prediction, and control and to eliminate vibrations.</p>

Dynamic Response Analysis of a Double-Disc Rotor System with Rolling Bearings Based on POD Method

Modeling a Two-Span Rotor System Based on the Hamilton Principle and Rotor Dynamic Behavior Analysis

Nonlinear dynamic analysis of a complex dual rotor-bearing system based on a novel model reduction method

Dynamics Characteristics of Rotor System Supported by Offset Bearings under Rolling Conditions

An Adaptive Proper Orthogonal Decomposition Method for Model Order Reduction of Multi-Disc Rotor System

Periodic Response Analysis of A Misaligned Rotor System by Harmonic Balance Method with Alternating Frequency/Time Domain Technique

Dynamic modeling and stability analysis of a rotor-bearing system with bolted-disk joint

Application of the Transient Proper Orthogonal Decomposition Method for Order Reduction of Rotor Systems with Faults

Nonlinear Response Analysis for an Aero Engine Dual-Rotor System Coupled by the Inter-Shaft Bearing

Numerical and experimental analysis of the effect of eccentric phase difference in a rotor-bearing system with bolted-disk joint

Study on the Dynamic Response of an Unbalanced Rotor System Supported by Ball Bearings

A modified nonlinear POD method for order reduction based on transient time series

Response Analysis of a Dual-Disc Rotor System with Multi-Unbalances–multi-fixed-point Rubbing Faults

Stability and Response Analysis of Symmetrical Single-Disk Flexible Rotor-Bearing System

Nonlinear response analysis for a dual-rotor system supported by ball bearing

Nonlinear Dynamic Analysis of a Flexible Rotor System with Combined Fixed-Tilting Pad Journal Bearings

Numerical Analysis of a Nonlinear Double Disc Rotor-Seal System

Dynamic response analysis for the aero-engine dual-rotor-bearing system with flexible coupling misalignment faults

Influencing Parameters Analysis On Dynamics Characteristic Of A Double-Span Rotor System

Periodic Response of an Unbalanced Sliding Bearing-Rotor Dynamic System and Its Stability and Bifurcation

A General Dynamic Model Coupled with EFEM and DBM of Rolling Bearing-Rotor System